Materials Science

, Volume 52, Issue 2, pp 188–193 | Cite as

Formation of the Structure of Cr3C2–MNMts 60-20-20 Cermets

  • P. M. PrysyazhnyukEmail author
  • T. A. Shihab
  • V. H. Panchuk

We study the structure of cermets based on Cr3C2 with binders of manganese German silver. These cermets are obtained by the impregnation of preliminarily pressed and sintered Cr3C2 frames with MNMts 60-20-20 German silver at 1150°C in argon. The prepared materials have a three-phase structure including of a solid solution based on copper, Cr3C2 , and (Cr, Mn)7C3 precipitating in the form of dispersed inclusions in the binder and on the boundaries of carbide grains.


cermets manganese German silver chromium carbide impregnation structure 


  1. 1.
    R. S. Dean and C. T. Anderson, “Alloys of manganese–copper and nickel,” Amer. Soc. Met. Trans., 29, 808–812 (1941).Google Scholar
  2. 2.
    B. E. Paton, D. A. Dudko, B. I. Maksimovich, and N. G. Agafonov, “Surfacing by freezing and pouring of molten filling materials,” Avtomat. Svarka, No. 11, 44–48 (1966).Google Scholar
  3. 3.
    L. I. Danilov and F. M. Rovenskikh, “Hard surfacing of parts of the charging equipment of blast furnaces by means of a composite alloy,” Metallurg, No. 1, 12–15 (1973); English translation: Metallurgist, 17, Issue 1, 22–26 (1973).Google Scholar
  4. 4.
    V. P. Bondarenko, Triboengineering Composites with High-Modulus Fillers [in Russian], Naukova Dumka, Kiev (1987).Google Scholar
  5. 5.
    V. Ya. Belousov, “Increasing the wear resistance of granular tungsten carbide base composite materials by heat treatment,” Fiz.-Khim. Mekh. Mater., 15, No. 5, 95–97 (1979); English translation: Sov. Mater. Sci., 15, No. 5, 512–514 (1979).Google Scholar
  6. 6.
    V. Ya. Belousov, Durability of Machine Components with Composite Materials [in Russian], Vyshcha Shkola, Lviv (1984).Google Scholar
  7. 7.
    I. Spyrydonova and O. Sukhova, “Composite materials with metallic matrix hardened by Cr–20Ti–10C particles,” Fiz. Khim. Tverd. Tila, 3, No. 3, 503–507 (2002).Google Scholar
  8. 8.
    E. V. Sukhovaya, “Structural approach to the development of wear-resistant composite materials,” Sverkhtverd. Mater., No. 5, 29–38 (2013).Google Scholar
  9. 9.
    A. D. Panasyuk, V. S. Fomenko, and G. G. Glebova, Stability of Nonmetallic Materials in Melts: A Handbook [in Russian], Naukova Dumka, Kiev (1986).Google Scholar
  10. 10.
    G. V. Samsonov and I. M. Vinnitskii, Refractory Compounds: A Handbook [in Russian], Metallurgiya, Moscow (1976).Google Scholar

Copyright information

© Springer Science+Business Media New York 2016

Authors and Affiliations

  • P. M. Prysyazhnyuk
    • 1
    Email author
  • T. A. Shihab
    • 2
  • V. H. Panchuk
    • 1
  1. 1.Ivano-Frankivs’k National Technical University of Oil and GasIvano-Frankivs’kUkraine
  2. 2.Middle Technical University, Engineering Technical CollegeBaghdadIraq

Personalised recommendations