On the basis of a mathematical model of alloys containing graphite inclusions, we obtain analytic relations for the prediction of mechanical properties of the material (ultimate strength \( {\upsigma_{\operatorname{u}}} \) and static crack resistance \( {K_{{\operatorname{IC}}}} \)) depending on the shape and volume content of these inclusions.
Similar content being viewed by others
References
A. Ya. Krasovs’kyi and V. V. Kalaida, Strength and Crack Resistance of Cast Irons with Flaky Graphite [in Ukrainian], Naukova Dumka, Kyiv (1989).
L. Grüter, “Prediction of fracture toughness for cast-iron alloys,” Mater. Sci. Eng., 35, No. 2, 157–164 (1978).
О. P. Ostash, І. P. Volchok, O. B. Kolotilkin, et al., Structure and Fracture Resistance of Iron–Carbon Alloys [in Ukrainian], Karpenko Physicomechanical Institute, Ukrainian National Academy of Sciences, Lviv (2001).
Y. Murakami, Metal Fatigue Effect of Small Defects and Nonmetallic Inclusions, Elsevier (2002).
P. M. Vytvyts’kyi, “Elastoplastic equilibrium of a plate with a periodic system of cracks,” Dopov. Akad. Nauk Ukr. RSR. Ser. А, No. 6, 524–527 (1970).
R. P. Todorov and M. V. Nikolov, Structure and Properties of Castings of Graphitized Steel [in Russian], Metallurgiya, Moscow (1976).
A. P. Gulyaev and V. P. Emelina, “Influence of alloying elements on properties of ferrite,” Stal’, No. 2, 138–142 (1947).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 48, No. 5, pp. 61–66, September–October, 2012.
Rights and permissions
About this article
Cite this article
Akimov, І.V., Sylovanyuk, V.P., Volchok, І.P. et al. Influence of the shape of graphite inclusions on the mechanical properties of iron–carbon alloys. Mater Sci 48, 620–627 (2013). https://doi.org/10.1007/s11003-013-9546-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-013-9546-x