We have analyzed quantitatively parameters of pit-like defects on the surface of corroded D16 sheet alloy by methods of statistical processing of their metallographic images. The depth of penetration of corrosion damages has been determined by 3D-optical profilometry and by measuring sizes on crosssections. We have determined the relation between the geometric parameters of the corrosion damage of the surface and the decrease in the yield strength of the corroded alloy.
Similar content being viewed by others
References
Z. Szklarska-Smialowska, “Pitting corrosion of aluminum,” Corr. Sci., 41, 1743–1767 (1999).
R. M. Pidaparti and R. R. Patel, “Correlation between corrosion pits and stress in Al alloys,” Mater. Lett., 62, 4497–4499 (2008).
R. A. Kaidrikov, B. L. Zhuravlev, and L. R. Nurullina, “Monitoring of the pitting corrosion of production equipment,” Zashch. Met., 35, No. 2, 245–246 (1999).
O. P. Ostash, I. M. Andreiko, Yu. V. Holovatyuk, “Degradation of materials and fatigue durability of aircraft constructions after long-term operation,” Fiz.-Khim. Mekh. Mater., 42, No. 4, 5–16 (2006); English translation: Mater. Sci., 42, No. 4, 427–429 (2006).
A. Ya. Ishchenko, T. M. Labur, V. N. Bernadskii, and O. K. Makovetskaya, Aluminum and Its Alloys in Modern Welded Structures [in Russian], Ekotekhnologiya, Kiev (2006).
V. S. Sinyavskii, V. D. Val’kov, and G. M. Budov, Corrosion and Protection of Aluminum Alloys [in Russian], Metallurgiya, Moscow (1979).
I. M. Dmytrakh, O. L. Bilyi, B. I. Kolodii, and R. L. Leshchak, “Investigation of the development of localized corrosion-induced defects of welded pipes of elements of the water-steam channels of thermal electric power plants,” Fiz.-Khim. Mekh. Mater., 42, No. 4, 17–25 (2006); English translation: Mater. Sci., 42, No. 4, 440–450 (2006).
H. E. Exner and H. P. Hougardy (editors), Quantitative Image Analysis of Microstructures, DGM Informationsgesellschaft (1988).
S. A. Saltykov, Stereometric Metallography [in Russian], Metallurgiya, Moscow (1976).
B. P. Rusyn, A. Yu. Pokhmurs’kyi, and R. Ya. Kosarevych, Method for the Determination of the Size of Pit-like Defects with Regard for Closed Zones [in Ukrainian], Patent No. 54276, Publ. 25.02.2010, Bull. No. 11.
A. Pokhmurskyy, B. Rusyn, O. Lusyk, Т. Lampke, “Methode zur automatischen Eliminierung von Praparationsdefekten an korrodierten Oberflachen bei metallografischer Bildanalyse,” Werkst. Werkstofftechn. Anwend., 37, 325–329 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 48, No. 1, pp. 95–99, January–February, 2012.
Rights and permissions
About this article
Cite this article
Pokhmurs’kyi, A.Y., Rusyn, B.P. & Obukh, Y.V. Evaluation of the influence of pit-like defects on the strength of D16T sheet alloy. Mater Sci 48, 101–105 (2012). https://doi.org/10.1007/s11003-012-9478-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-012-9478-x