We describe a procedure and present some experimental results of evaluation of the heat-affected zone (HAZ) for butt electron-beam welding of the plates of variable thickness with regard for the nonuniform distribution of energy. It is shown that the heat removal caused by the increase in the thicknesses of the plates leads to changes in the sizes of the HAZ in the upper part of the welded joint. It is established that the instantaneous cooling rate changes with the distance from the reference point as a result of changes in the rate of energy input, which is responsible for the inhomogeneity of the microstructure over the thickness of the joint.
Similar content being viewed by others
References
N. N. Rykalin, Numerical Analyses of Thermal Processes in Welding [in Russian], Mashinostroenie, Moscow (1951).
V. A. Karkhin, Thermal Fundamentals of Welding [in Russian], Leningrad State Polytechnic Institute, Leningrad (1990).
A. Ya. Nedoseka, Fundamentals of the Numerical Analysis and Diagnostics of Welded Structures [in Russian], INDPROM, Kiev (2001).
A. V. Vasylyk, Ya. A. Drohomyrets’kyi, and Ya. A. Kryl’, Thermal Calculations in Welding [in Ukrainian], Fakel, Ivano-Frankivs’k (2004).
V. D. Kodolov, “On the numerical analysis of thermal cycles of argon-arc welding of the sheets of AMg6 alloy with nonconsumable electrode,” Svaroch. Proizv., No. 4, 14–17 (1963).
N. N. Artem’eva, “On the numerical analysis of the temperature field of argon-arc welding of the plates of D16 duralumin,” Svaroch. Proizv., No. 5, 16–19 (1958).
A. E. Stronskii and V. V. Levin, “Numerical analysis of the temperature field in the near-weld zone under the conditions of electron-beam welding of metals of large thickness,” Svaroch. Proizv., No. 5, 3–4 (1982).
V. A. Karkhin and A. Yu. Pilipenko, “Simulation of thermal cycles in the weld metal and in the heat-affected zone for the beam methods of welding of thick plates,” Svaroch. Proizv., No. 11, 25–27 (1996).
G. D. Nikiforov, Metallurgy of Welding of Aluminum Alloys by Melting [in Russian], Mashinostroenie, Moscow (1972).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 46, No. 1, pp. 103–109, January–February, 2010.
Rights and permissions
About this article
Cite this article
Skal’s’kyi, V.R., Lyasota, I.M. Estimation of the heat-affected zone for the electron-beam welding of plates. Mater Sci 46, 115–123 (2010). https://doi.org/10.1007/s11003-010-9271-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-010-9271-7