We deduce the relations for the evaluation of stresses in an inclusion and in the matrix near its contour convenient for engineering calculations. It is shown that the parameter K I for an absolutely rigid lamellar inclusion takes two different values depending on the type of limit transition. For cracks, this parameter depends on the loading mode if we take into account the fact that the cracks transform into the corresponding hollows under loading.
Similar content being viewed by others
References
M. M. Stadnyk, “Thin relatively compliant inclusion in space under the action of uniform heating and triaxial tension,” Nauk. Visn. NLTU Ukr., Issue 19.1, 243–247 (2009).
M. M. Stadnyk, “Elastic equilibrium of a body with relatively rigid inclusion under the action of uniform heating and triaxial tension,” Nauk. Visn. NLTU Ukr., Issue 19.5, 247–254 (2009).
M. M. Stadnyk, “A method for the solution of three-dimensional problems of thermoelasticity for bodies with thin inclusions,” Mater. Sci., 30, No. 6, 643–652 (1994).
V. P. Silovanyuk, “Rigid lamellar inclusion in the elastic space,” Fiz.-Khim. Mekh. Mater., 19, No. 5, 80–84 (1984).
L. T. Berezhnyts’kyi and I. T. Denysyuk, “Stress-strain state of an isotropic body in the vicinity of a rigid elliptic lamellar inclusion,” Dokl. Akad. Nauk Ukr. RSR. Ser. A, No. 12, 31-35 (1984).
L. T. Berezhnitskii, V. V. Panasyuk, and N. G. Stashchuk, Interaction of Rigid Linear Inclusions and Cracks in Deformed Bodies [in Russian], Naukova Dumka, Kiev (1983).
M. M. Stadnyk, “Limiting equilibrium of a body with elliptic crack under the action of complex loading,” Fiz.-Khim. Mekh. Mater., 45, No. 2, 71–74 (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 45, No. 4, pp. 39–44, July–August, 2009.
Rights and permissions
About this article
Cite this article
Stadnyk, M.M. Infinite body with thin elastic inclusion under the action of triaxial loading. Mater Sci 45, 504–512 (2009). https://doi.org/10.1007/s11003-010-9208-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-010-9208-1