Abstract
The multifunctional properties of polymer clay nanocomposites (PCNs) can be related to the interaction of clays, polymer and interphase region. Several experimental, analytical and numerical studies have been conducted to characterize the mechanical behavior of PCNs. The elastic behavior of PCNs is well documented in the literature but their other material properties like yield strength are rather vague. On the other hand, the variation of material parameters and the stochastic nature of interphase region hinder the use of deterministic methods. In this study, a stochastic analysis along with a hierarchical multiscale method is used to analyze the effect of interphase properties on the macroscopic properties of PCNs. Since the interphase layer is expected to be weaker than the polymer matrix, a weakening coefficient is defined to describe the interphase properties based on the matrix properties. This weakening coefficient and the interphase thickness are considered as the stochastic inputs. The elastic modulus and yield strength of nylon 6/clay nanocomposites are calculated using the stochastic multiscale framework. The uncertainty propagation and sobol sensitivity analysis are performed to study the effect of random inputs on the elastic modulus and yield strength of PCNs. Despite the wide range of input variations, the accuracy of the proposed stochastic multiscale framework for the prediction of the PCNs properties is estimated by validating our results against the available experimental data in the literature.
Similar content being viewed by others
References
Almasi, A., Silani, M., Talebi, H., Rabczuk, T.: Stochastic analysis of the interphase effects on the mechanical properties of clay/epoxy nanocomposites. Compos. Struct. 133, 1302–1312 (2015)
Belytschko, T., Song, J.H.: Coarse-graining of multiscale crack propagation. Int. J. Numer. Methods Eng. 81(5), 537–563 (2010)
Chen, Y., Chia, J.Y.H., Su, Z.C., Tay, T.E., Tan, V.B.C.: Mechanical characterization of interfaces in epoxy-clay nanocomposites by molecular simulations. Polymer 54(2), 766–773 (2013)
Dai, G., Mishnaevsky, L.: Damage evolution in nanoclay-reinforced polymers: a three-dimensional computational study. Compos. Sci. Technol. 74, 67–77 (2013)
Gajjela, S., Ramachandran, V., Somasekharan, J.: Influence of interphase material and clay particle shape on the effective properties of epoxy-clay nanocomposites. Compos. Part B Eng. 88, 11–18 (2016)
Ghanem, R.G., Spanos, P.D.: Stochastic Finite Elements: A Spectral Approach. Courier Corporation, North Chelmsford (2003)
Giannelis, E.P.: Polymer layered silicate nanocomposites. Adv. Mater. 8(1), 29–35 (1996)
Hazanov, S., Huet, C.: Order relationships for boundary conditions effect in heterogeneous bodies smaller than the representative volume. J. Mech. Phys. Solids 42(12), 1995–2011 (1994)
He, C., Liu, T., Tjiu, W.C., Sue, H.J., Yee, A.F.: Microdeformation and fracture mechanisms in polyamide-6/organoclay nanocomposites. Macromolecules 41(1), 193–202 (2008)
Hill, R.: On constitutive macro-variables for heterogeneous solids at finite strain. In: Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol. 326, pp. 131–147. The Royal Society (1972)
Hosseinabadi, H.G., Khederlou, K., Payandehpeyman, J., Bagheri, R.: On variations of the interphase thickness and the slope of strengthening by clay addition in exfoliated polymer-clay nanocomposites. Polymer 90, 302–308 (2016)
Huskić, M., Žigon, M., Ivanković, M.: Comparison of the properties of clay polymer nanocomposites prepared by montmorillonite modified by silane and by quaternary ammonium salts. Appl. Clay Sci. 85, 109–115 (2013)
Jacquelin, E., Adhikari, S., Sinou, J.-J., Friswell, M.I.: Polynomial chaos expansion in structural dynamics: accelerating the convergence of the first two statistical moment sequences. J. Sound Vib. 356, 144–154 (2015)
Kim, B., Choi, J., Yang, S., Yu, S., Cho, M.: Multiscale modeling of interphase incrosslinked epoxy nanocomposites. Compos. Part B Eng. 120, 128–142 (2017)
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., Kamigaito, O.: Mechanical properties of nylon 6-clay hybrid. J. Mater. Res. 8(5), 1185–1189 (1993)
Nemat-Nasser, S., Hori, M.: Micromechanics: Overall Properties of Heterogeneous Materials, 3rd edn. Elsevier, New York (2013)
Netravali, A.N., Mittal, K.L.: Interface/Interphase in Polymer Nanocomposites. Adhesion and Adhesives: Fundamental and Applied Aspects. Wiley, New York (2016)
Pahlavanpour, M., Moussaddy, H., Ghossein, E., Hubert, P., Lévesque, M.: Prediction of elastic properties in polymer-clay nanocomposites: analytical homogenization methods and 3D finite element modeling. Comput. Mater. Sci. 79, 206–215 (2013)
Schuëller, G.I., Pradlwarter, H.J.: Uncertain linear systems in dynamics: retrospective and recent developments by stochastic approaches. Eng. Struct. 31, 2507–2517 (2009)
Sevostianov, I., Kachanov, M.: Effect of interphase layers on the overall elastic and conductive properties of matrix composites. Applications to nanosize inclusion. Int. J. Solids Struct. 44(3), 1304–1315 (2007)
Shokrieh, M.M., Kefayati, A.R., Chitsazzadeh, M.: Fabrication and mechanical properties of clay/epoxy nanocomposite and its polymer concrete. Materi. Des. 40, 443–452 (2012)
Silani, M., Talebi, H., Ziaei-Rad, S., Kerfriden, P., Bordas, S.P., Rabczuk, T.: Stochastic modelling of clay/epoxy nanocomposites. Compos. Struct. 118, 241–249 (2014)
Song, S., Chen, Y., Su, Z., Quan, C., Tan, V.B.: Effects of clay structural parameters and gallery strength on the damage behavior of epoxy/clay nanocomposites. Compos. Sci. Technol. 85, 50–57 (2013)
Song, S., Chen, Y., Su, Z., Quan, C., Tan, V.B.: Multiscale modeling of damage progression in nylon 6/clay nanocomposites. Compos. Sci. Technol. 100, 189–197 (2014)
Xu, W., Zeng, Q., Yu, A.: Young’s modulus of effective clay clusters in polymer nanocomposites. Polymer 53(17), 3735–3740 (2012)
Yaghoubi, V., Marelli, S., Sudret, B., Abrahamsson, T.: Sparse polynomial chaos expansions of frequency response functions using stochastic frequency transformation. Probab. Eng. Mech. 48, 39–58 (2017)
Zaïri, F., Gloaguen, J.M., Naït-Abdelaziz, M., Mesbah, A., Lefebvre, J.M.: Study of the effect of size and clay structural parameters on the yield and post-yield response of polymer/clay nanocomposites via a multiscale micromechanical modelling. Acta Materialia 59(10), 3851–3863 (2011)
Zare, Y.: Modeling the yield strength of polymer nanocomposites based upon nanoparticle agglomeration and polymer-filler interphase. J. Colloid Interface Sci. 467, 165–169 (2016)
Zare, Y., Garmabi, H.: Thickness, modulus and strength of interphase in clay/polymer nanocomposites. Appl. Clay Sci. 105, 66–70 (2015)
Zare, Y., Rhee, K.Y.: The mechanical behavior of CNT reinforced nanocomposites assuming imperfect interfacial bonding between matrix and nanoparticles and percolation of interphase regions. Compos. Sci. Technol. 144, 18–25 (2017)
Acknowledgements
The authors would like to acknowledge the support from Qatar National Research Fund (QNRF), through Grant No. NPRP 7 - 882 - 2 - 326.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zolfaghari, H., Silani, M., Yaghoubi, V. et al. Stochastic analysis of interphase effects on elastic modulus and yield strength of nylon 6/clay nanocomposites. Int J Mech Mater Des 15, 109–123 (2019). https://doi.org/10.1007/s10999-017-9399-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10999-017-9399-9