Abstract
Order–disorder phase transitions in Cu0.6Pd0.4 and Cu0.85Pd0.15 alloys have been investigated using differential scanning calorimetry and drop calorimetry. The differential scanning calorimetry measurements show that the transition in both these alloys are reversible in nature and the enthalpy increment measurements reveal that these transitions are first order in nature. The transition temperature of first-order phase transition in Cu0.6Pd0.4 and Cu0.85Pd0.15 alloys have been evaluated to be 884(±2) and 799(±2) K, respectively, from drop calorimetric measurements. The latent heat of first-order phase transition in Cu0.6Pd0.4 alloy were evaluated to be 31.2(±0.6) and 28.9(±0.5) J g−1, by enthalpy increment and differential scanning calorimetry measurements, respectively. Similarly, the latent heat of first-order phase transition in Cu0.85Pd0.15 alloy were evaluated to be 23.1(±0.6) and 21.3(±0.5) J g−1, by enthalpy increment and differential scanning calorimetry measurements, respectively. The solidus temperatures of Cu0.6Pd0.4 and Cu0.85Pd0.15 alloys were found to be 1,457(±2) and 1,360 K, respectively.
Similar content being viewed by others
References
Zhang X, Wang W, Liu J, Sheng S, Xiong G, Yang W. Hydrogen transport through thin palladium–copper alloy composite membranes at low temperatures. Thin Solid Films. 2008;516:1849–56.
Rao F, Way JD. Influence of alloy composition and membrane fabrication on the pressure dependence of the hydrogen flux of palladium–copper membranes. Ind Eng Chem Res. 2003;42:5827–35.
Nam SE, Lee KH. Hydrogen separation by Pd alloy composite membranes: introduction of diffusion barrier. J Membr Sci. 2001;192:177–85.
Subramanian PR, Laughlin DE. Cu–Pd (copper–palladium). J Phase Equilib. 1991;12:231–43.
Huang P, Menon S, de Fontaine D. On the Cu–Pd phase diagram. J Phase Equilib. 1991;12:3–5.
Li M, Du Z, Guo C, Li C. A thermodynamic modeling of the Cu–Pd system. Calphad 2008;32:439–46.
Oriani R, Murphy WK. Thermodynamics of ordering alloys-IV heat of formation of some alloys of transition metals. Acta Metall. 1962;10:879–85.
Klopotov AA, Tailashev AS, Kozlov EV. Structural phase transition mechanism in the alloy CuPd. Izv Vyssh Uchebn Zaved Fizika. 1988;6:67–72.
Parida SC, Rakshit SK, Dash S, Singh Z, Prasad R, Venugopal V. Thermodynamic properties of quaternary oxides in the system Ba–La–Fe–O by differential scanning calorimetry and solid-state electrochemical cells. J Chem Thermodyn. 2004;36:911–7.
Dash S, Parida SC, Singh Z, Sen BK, Venugopal V. Thermodynamic investigations of ThO2–UO2 solid solutions. J Nucl Mater. 2009;393:267–81.
PCPDFWIN Version 2.2, JCPDS-ICDD; 2001.
Guymont M, Feutelais Y, Legendre B. In situ observation and determination of the enthalpy of the order–disorder transition in Cu3Pd2 alloy. Phil Nat. 2009;1:205–10.
Belov GV, Trusov BG. ASTD database, Moscow; 1983.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Parida, S.C., Anand, N.S., Jat, R.A. et al. Calorimetric investigation of order–disorder transition in Cu0.6Pd0.4 and Cu0.85Pd0.15 alloys. J Therm Anal Calorim 112, 173–177 (2013). https://doi.org/10.1007/s10973-012-2752-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-012-2752-1