Abstract
Polyamide 6.6 multifilament yarns are converted to crimped fibres by texturing in order to simulate the properties of natural staple fibre yarns for textile applications. Texturing is carried out by mechanical stresses (turbulences or twisting) in different atmospheres which affect crystallinity and thermal stability of yarns. Two polyamide yarns with the same linear density but consisting of filaments of different fineness were textured by the air-jet and the false-twist procedures. The influence of texturing conditions and filament fineness on crystallinity and thermomechanical behaviour and dimensional stability were studied by TMA and DSC. The air-jet texturing procedure leads to a slight increase in crystallinity of yarns whereas the false-twist texturing procedure was more effective especially when thicker filaments were textured. The inflection point of the shrinkage curve before melting was a good estimator of the effective temperature of yarn texturing.
Similar content being viewed by others
References
S. K. Mukhopadhyay in ‘Advances in Fibre Science’, The Textile Institute, 1992, p. 115.
R. E. J. Greer, PhD Thesis, University of Manchester, 1969.
J. E. McIntyre, ’Synthetic Fibres: Nylon, Polyester, Acrylic, Polyolefin’, Woodhead Publishing Ltd., CRC Press, Cambridge 2005.
P. W. Foster, K. Greenwood, R. Jeetah and S. K. Mukhopadhyay, J. Text. Inst., 83 (1992) 414.
J. W. S. Hearle, L. Hollick and D. K. Wilson, ’Yarn Texturing Technology’, Woodhead Publishing Ltd., Abington Hall, Abington, Cambridge, CB1 6AH, England 2001.
H. Tazawa, M. Sc. Thesis, North Carolina State University, 1982.
A. Anton, Text. Res. J., 43 (1973) 524.
L. A. Dennis and D. R. Buchanan, Text. Res. J., 57 (1987)) 625.
D. Cayuela, A. M. Manich, I. Gacén and J. Gacén, J. Therm. Anal. Cal., 72 (2003) 729.
J. W. S. Hearle, Polymers and their Properties. Vol. 1 Fundamentals of Structure and Mechanics, p. 370, Ellis Horwood Ltd., Chichester 1982.
A. M. Manich, J. Maillo, D. Cayuela, J. Gacén, M. D. de Castellar and M. H. Ussman, J. Appl. Polym. Sci., 105 (2007) 2482.
D. Cayuela and J. Gacen, J. Thermal Anal., 41 (1994) 1599.
A. M. Manich, T. Bosch, J. Carilla, M. H. Ussman, J. Maillo and J. Gacén, Text. Res. J., 73 (2003) 333.
A. M. Manich, J. Maillo, D. Cayuela, J. Gacén, M. D. de Castellar and M. Ussman, Fibers Polymers, 8 (2007) 512.
Statgraphics 5 Plus. Manugistics, Inc. 2115 Jefferson Street, Rockville, Maryland 20852, USA.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Manich, A.M., Maíllo, J., Cayuela, D. et al. Effect of the air-jet and the false-twist texturing processes on the thermomechanical behaviour of polyamide 6.6 yarns. J Therm Anal Calorim 93, 921–926 (2008). https://doi.org/10.1007/s10973-007-8556-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-007-8556-z