Skip to main content
Log in

Surfactant-assisted sol–gel synthesis and characterization of hierarchical nanoporous merwinite with controllable drug release

  • Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.)
  • Published:
Journal of Sol-Gel Science and Technology Aims and scope Submit manuscript

Abstract

The aim of this research is to suggest both new and efficient synthesis method for preparation of pure phase nanoporous merwinite ((Ca3Mg(SiO4)2), NM) bioceramics and assess their in vitro drug delivery potential. Surfactant-assisted sol–gel method is used to produce NM using cetyltrimethylammoniumbromide (CTAB) as a surfactant agent. The XRD results showed that a single-phase merwinite is obtained after calcination at 850 °C. Both the FESEM and N2 adsorption desorption results exhibited that the samples have hierarchical porous structure ranging from 25 nm to 3.5 μm. Potential application of the synthesized calcium-magnesium-silicate samples as a drug delivery agent is studied by estimating their ibuprofen release properties up to 180 h. This study revealed that NM is produced by surfactant-assisted sol–gel method at lower calcination temperature compared to other studies and the synthesized samples can be used as a promising local drug delivery system.

Pure phase nanoporous merwinite was synthesized via surfactant-assisted sol-gel method. Potential application of the synthesized calcium-magnesium-silicate samples as a drug delivery agent was studied. This study revealed that merwinite is produced at lower calcination temperature compared to other studies and the synthesized samples can be used as a promising local drug delivery system.

Highlights

  • In this study, for the first time a simple and efficient strategy is developed to synthesize both nanoporous and pure phase merwinite as a new local drug delivery system.

  • The results showed that single-phase nanoporous merwinite was synthesized by surfactant-assisted sol-gel method.

  • Nanoporous samples had a hierarchical porous structure ranging from 25 nm to 3.5 μm.

  • Samples showed sustained drug release up to 180 h and could be used as a promising drug delivery system.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Vallet-Regi M (2014) Bio-ceramics with clinical applications. John Wiley & Sons Ltd, UK, pp 343–359

    Book  Google Scholar 

  2. Arcos D, Vallet-Regí M (2013) Bioceramics for drug delivery. Acta Mater 61:890–911

    Article  Google Scholar 

  3. Ghadiri S, Hassanzadeh-Tabrizi SA, Bigham A (2017) The effect of synthesis medium on structure and drug delivery behavior of CTAB-assisted sol–gel derived nanoporous calcium–magnesium–silicate. J Sol-Gel Sci Technol 83:229–236

    Article  Google Scholar 

  4. Ou J, Kang Y, Huang Z, Chen X et al. (2008) Preparation and in vitro bioactivity of novel merwinite ceramic. Biomed Mat 3(1):015015

    Article  Google Scholar 

  5. Hafezi M, Talebi AR, Miresmaeili SM, Sadeghian F, Fesahat F (2013) Histological analysis of bone repair in rat femur via nanostructured merwinite granules. Ceram Int 39:4575–4580

    Article  Google Scholar 

  6. Razavi M, Fathi M, Savabi O, Hashemi Beni B, Vashaee D, Tayebi L (2014) Nanostructured merwinite bioceramic coating on Mg alloy deposited by electrophoretic deposition. Ceram Int 40:9473–9484

    Article  Google Scholar 

  7. Bigham A, Hassanzadeh-Tabrizi SA, Rafienia M, Salehi H (2016) Ordered mesoporous magnesium silicate with uniform nanochannels as a drug delivery system: the effect of calcination temperature on drug delivery rate. Ceram Int 42:17185–17191

    Article  Google Scholar 

  8. Hassanzadeh-Tabrizi SA, Bigham A, Rafienia M (2016) Surfactant-assisted sol–gel synthesis of forsterite nanoparticles as a novel drug delivery system. Mater Sci Eng C Biol 58:737–741

    Article  Google Scholar 

  9. Ansari M, Bigham A, Hassanzadeh-Tabrizi SA (2017) H. Abbastabar Ahangar, Synthesis and characterization of Cu0.3Zn0.5Mg0.2Fe2O4 nanoparticles as a magnetic drug delivery system. J Magn Magn Mater 439:67–75

    Article  Google Scholar 

  10. Tavakoli H, Sarraf-Mamoory R, Zarei AR (2015) Solvothermal synthesis of copper nanoparticles loaded on multi-wall carbon nanotubes as catalyst for thermal decomposition of ammonium perchlorate. J Adv Mater Process 3:3–10

    Google Scholar 

  11. Mirhadi SM, Tavangarian F, Emadi R (2012) Synthesis, characterization and formation mechanism of single-phase nanostructure bredigite powder. Mat Sci Eng C Bio 32:133–139

    Article  Google Scholar 

  12. Foroughi F, Hassanzadeh-Tabrizi SA, Bigham A (2016) In situ microemulsion synthesis of hydroxyapatite-MgFe2O4 nanocomposite as a magnetic drug delivery system. Mater Sci Eng C Biol 68:774–779

    Article  Google Scholar 

  13. Kruk M, Jaroniec M (2001) Gas adsorption characterization of ordered organic-inorganic nanocomposite materials. Chem Mater 13:3169–3183

    Article  Google Scholar 

  14. Hassanzadeh-Tabrizi SA, Taheri-Nassaj E (2008) Effects of milling and calcination temperature on the compressibility and sinterability of a nanocrystalline Al2O3–Y3Al5O12 composite powder. J Am Ceram Soc 91:3546–3551

    Article  Google Scholar 

  15. Choi J, Kim J, Yoo KS, Lee TG (2007) Synthesis of mesoporous TiO2/Ɣ–Al2O3 composite granules with different sol composition and calcination temperature. Powder Technol 181:83–88

    Article  Google Scholar 

  16. Wu J, Zhu YJ, Cao SW, Chen F (2010) Hierarchically nanostructured mesoporous spheres of calcium silicate hydrate: surfactant-free sonochemical synthesis and drug-delivery system with ultra-high drug-loading capacity. Adv Mater 22:749–753

    Article  Google Scholar 

  17. Guo X, Wu J, Yiu Y, Hu Y, Zhu Y, Sham T (2013) Drug–nanocarrier interaction— tracking the local structure of calcium silicate upon ibuprofen loading with Xray absorption near edge structure (XANES). Phys Chem Chem Phys 15:15033

    Article  Google Scholar 

  18. Zhu Y, Shi J, Li Y, Chen H, Shen W, Dong X (2005) Storage and release of ibuprofen drug molecules in hollow mesoporous silica spheres with modified pore surface. Microporous Mesoporous Mater 85:75–81

    Article  Google Scholar 

  19. Mourino V, Boccaccini AR (2010) Bone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds. J R Soc Interface 7:209–227

    Article  Google Scholar 

  20. Hadidi M, Bigham A, Saebnoori E, Hassanzadeh-Tabrizi SA et al. (2017) Electrophoretic-deposited hydroxyapatite-copper nanocomposite as an antibacterial coating for biomedical applications. Surf Coat Technol 321:171–179

    Article  Google Scholar 

  21. Horcajada P, Ramila A, Perez-Pariente J, Vallet-Regi M (2004) Influence of pore size of MCM-41 matrices on drug delivery rate. Microporous Mesoporous Mater 68:105–109

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to S. A. Hassanzadeh-Tabrizi.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Bigham, A., Hassanzadeh-Tabrizi, S.A., Khamsehashari, A. et al. Surfactant-assisted sol–gel synthesis and characterization of hierarchical nanoporous merwinite with controllable drug release. J Sol-Gel Sci Technol 87, 618–625 (2018). https://doi.org/10.1007/s10971-018-4777-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10971-018-4777-9

Keywords

Navigation