Abstract
The accumulation of 210Po generated by neutron-irradiated lead–bismuth eutectic (LBE) is a noticeable issue for the radiation protection of the generation-IV reactor. In this study, FISPACT-2007 was used to simulate the activation of 210Po in neutron-irradiated LBE. The specific activity of polonium-210 was measured by α spectrometry after deposition onto a silver disc. The experimental results indicate that the specific activities of 210Po are anastomotic with the simulation value, which provides a basis for further research on evaluating the evaporate behavior of 210Po in LBE.
Similar content being viewed by others
References
Zhang JS (2014) Lead-Bismuth Eutectic (LBE): a coolant candidate for gen. IV advanced nuclear reactor concepts. Adv Eng Mater 16(4):349–356
Khan MS, Bai Y, Huang Q, Xu C, Sun L, Zou X, Wang L (2020) Conceptual design and optimization of power generation system for lead-based reactor. Appl Therm Eng 168:114714
Buongiorno J, Larson C, Czerwinski KR (2003) Speciation of polonium released from molten lead bismuth. Radiochim Acta 91(3):153–158
Gromov BF, Efimov EI, Leonchuk MP, Veremeev AA, Chekunov VV, Orlov YI, Pankratov DV, Stepanov VS, Gorshkov VT (1996) Liquid-metal lead-bismuth target for high-energy protons as an intense source of neutrons in accelerator-controlled systems. At Energy 80(5):378–384
Scott BR (2007) Health risk evaluations for ingestion exposure of humans to polonium-210. Dose-Response 5(2):94–122
Karlsson E, Neuhausen J, Aerts A, Danilov II, Eichler R, Turler A, Vogele A (2021) Polonium behavior following a vacuum window rupture in a lead-bismuth eutectic based accelerator driven system. Appl Radiat Isot 168:109551
Deng LL, Wang YQ, Zhai ZA, Huang BC, Wu JW, He JB, Ni MY (2021) Multi-physics model development for polonium transport behavior in a lead-cooled fast reactor. Front Energy Res 9:711916
Tupper R, Minushkin B, Peters F, Kardos Z (1991) Polonium hazards associated with lead bismuth used as a reactor coolant. Paper presented at the International conference on fast reactors and related fuel cycles
Zrodnikov AV, Toshinsky GI, Komlev OG, Dragunov YG, Stepanov VS, Klimov NN, Kopytov II, Krushelnitsky VN (2006) Nuclear power development in market conditions with use of multi-purpose modular fast reactors SVBR-75/100. Nucl Eng Des 236(14–6):1490–1502
Buongiorno J, Loewen EP, Czerwinski K, Larson C (2004) Studies of polonium removal from molten lead-bismuth for lead-alloy-cooled reactor applications. Nucl Technol 147(3):406–417
Takano H, Takizuka T, Kitano T (2000) Investigation of corrosion, water reaction, polonium evaporation and bismuth resource in liquid metal lead-bismuth technology. Japan Atomic Energy Research Inst
Sekimoto H, Igashira M, Yano T, Obara TOhsaki T (2002) Research on the behavior of polonium produced in lead-bismuth eutectic irradiated with neutrons. JAERI's nuclear research promotion program, H10–026. Contract research
Amaya LO, Braet J (2009) Purification of lead-bismut eutectic used in accelerator driven systems—9411.WM2009 Conference, Phoenix, AZ 1–5
Maugeri EA, Neuhausen J, Eichler R, Dressler R, Rijpstra K, Cottenier S, Piguet D, Vögele ASchumann D (2016) Adsorption of volatile polonium and bismuth species on metals in various gas atmospheres: Part I - adsorption of volatile polonium and bismuth on gold. Radiochim Acta 104(11):757–767
Gonzalez Prieto B, Lim J, Rosseel K, Martens JA, Aerts A (2015) Polonium evaporation from liquid lead–bismuth eutectic with different oxygen content. J Radioanal Nucl Chem 309(2):597–605
Kong X, Yin L, Ji Y (2021) Simultaneous determination of 210Pb and 210Po in seafood samples using liquid scintillation counting. J Environ Radioact 231:106553
Matthews KM, Kim CK, Martin P (2007) Determination of 210Po in environmental materials: a review of analytical methodology. Appl Radiat Isot 65(3):267–279
Ehinger S, Pacer R, Romines F (1986) Separation of the radioelements 210Pb− 210Bi− 210Po by spontaneous deposition onto noble metals and verification by Cherenkov and liquid scintillation counting. J Radioanal Nucl Chem 98(1):39–48
Henricsson F, Ranebo Y, Holm E, Roos P (2011) Aspects on the analysis of 210Po. J Environ Radioact 102(5):415–419
Forrest R (2007) FISPACT-2007: User Manual, UKAEA-FUS-534. AKAEA Fusion Association, Abingdon UK
Acknowledgements
The authors acknowledge the support of the Environmental Radiation Surveillance Center, Environmental Protection Department of Anhui Province. We would also like to express our appreciation to the Lead-bismuth Fast Reactor Project Department, China Nuclear Power Technology Research Institute, for their valuable suggestions and irradiated samples.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no potential conflict of interest which would influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Xue, H., Xu, P., Yu, G. et al. Determination of 210Po generation from lead–bismuth eutectic irradiated with neutrons. J Radioanal Nucl Chem 332, 1345–1351 (2023). https://doi.org/10.1007/s10967-023-08839-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10967-023-08839-y