Abstract
A simple method for the simultaneous detection of stable and long-lived Mn, Ni, Co and Cu isotopes has been created by coupling an ion chromatographic system (IC) to an ICP-MS. The analytical procedure was tested with two chromatographic columns: a strong cation exchange and an anionic/cationic mixed bed. It was found that the best separation of the metals is typically obtained when mobile phase contains 0.05 mol/L of tartaric acid. Ammonia solution was used for adjustment of the eluent’s pH and this avoided contamination of the ICP-MS with eluent metals. The developed method was demonstrated in researching the samples of corrosion deposits from a pipeline of a nuclear power plant. The established 59Ni scaling factor to 60Co being 3.8 × 10−2 and it’s correlated to the literary data.
Similar content being viewed by others
References
Determination and Use of Scaling Factors for Waste Characterization in Nuclear Power Plants (2009) IAEA Nuclear Energy Series No. NW-T-1.18, IAEA, Vienna
Evans JC, Lepel EA, Sanders RW, Thomas CW, Robertson DE (1988) Long-lived activation products in light-water reactor construction materials: implications for decommissioning. Radioact Waste Manage Nucl Fuel Cycle 11(1):1–39
Robertson DE (1993) Radionuclide characterization of reactor decommissioning waste and neutron-activated metals. NUREG/CR-5894. U. S. Nuclear Regulatory Commission; NRC, Washington, DC
Hou X, Østergaard LF, Nielsen SP (2005) Determination of 63Ni and 55Fe in nuclear waste samples using radiochemical separation and liquid scintillation counting. Anal Chim Acta 535(1–2):297–307
Geckeis H, Hentsche D, Jensen D, Görtzen A, Kerner N (1997) Determination of 55Fe and 63Ni using semi-preparative ion chromatography—a feasibility study. Fresenius J Anal Chem 357(7):864–869
Gresits I, Tölgyesi S (2003) Determination of soft X-ray emitting isotopes in radioactive liquid wastes of nuclear power plants. J Radioanal Nucl Chem 258(1):107–112
Lehto J, Hou X (2011) Chemistry and analysis of radionuclides. Wiley, Weinheim
Kumagai H, Yamanaka M, Sakai T, Yokoyama T, Suzuki TM, Suzuki T (1998) Determination of trace metals in sea-water by inductively coupled plasma mass spectrometry interfaced with an ion chromatographic separation system: effectiveness of nitrilotriacetate chelating resin as the column stationary phase for preconcentration and elimination of matrix effects. J Anal At Spectrom 13(6):579–582
Shaw MJ, Haddad PR (2004) The determination of trace metal pollutants in environmental matrices using ion chromatography. Environ Int 30(3):403–431
Louw I (1996) Ion chromatographic determination of transition metals in irradiated nuclear reactor surveillance samples. Fresenius J Anal Chem 354(4):432–435
Sun Q, Yuan D, Chen Z, Megharaj M, Naidu R (2010) Reduction of polyatomic interferences during ion-chromatographic speciation of metal ions via their EDTA complexes along with ICP-MS detection using an octopole reaction system. Microchim Acta 169:41–47
Wolf SF, Bowers DL, Cunnane JC (2005) Analysis of high burnup spent nuclear fuel by ICP-MS. J Radioanal Nucl Chem 263(3):581–586
Ding X, Mou S (2001) Retention behavior of transition metals on a bifunctional ion-exchange column with oxalic acid as eluent. J Chromatogr A 920(1–2):101–107
Almeida AA, Jun X, Lima JLFC (1998) High-performance liquid chromatographic determination of trace amounts of transition metals in parenteral solutions. Analyst 123(6):1283–1287
Haddad PR, Jackson PE (1990) Ion chromatography principles and applications. Elsevier, Amsterdam
Perrin DD (1979) stabilityconstantsof metal-ion complexes: organic ligands, iupac chemical data series, international union of pure and applied chemistry. Pergamon Press, Oxford
Lederer M (1988) Some considerations on the “charge” on a metal ion in ion-exchange chromatography. J Chromatogr A 452:265–281
Sevenich GJ, Fritz JS (1983) Addition of complexing agents in ion chromatography for separation of polyvalent metal ions. Anal Chem 55(1):12–16
Bruzzoniti MC, Cardellicchio N, Cavalli S, Sarzanini C (2002) A study of the mechanisms involved in the separation of metal ions with a mixed-bed stationary phase. Chromatographia 55(3):231–234
Niese S, Boden W (1995) Scaling factors for activated corrosion products in low-level-wastes from power reactors. J Radioanal Nucl Chem 198(1):161–167
Remeikis V, Plukis A, Juodis L, Gudelis A, Lukauskas D, Druteikienė R, Lujanienė G, Lukšienė B, Plukienė R, Duškesas G (2009) Study of the nuclide inventory of operational radioactive waste for the RBMK-1500 reactor. Nucl Eng Des 239(4):813–818
Hou X, Roos P (2008) Critical comparison of radiometric and mass spectrometric methods for the determination of radionuclides in environmental, biological and nuclear waste samples. Anal Chim Acta 608(2):105–139
Lee CH, Lee MH, Han SH, Ha YK (2011) Systematic radiochemical separation for the determination of 99Tc, 90Sr, 94Nb, 55Fe and 59,63Ni in low and intermediate radioactive waste samples. J Radioanal Nucl Chem 288(2):319–325
Acknowledgements
The authors would like to acknowledge the company, LOKMIS, and the Agency for Science, Innovation and Technology (MITA) for funding project VP2-1.3-UM-05-K-01-034. Furthermore, the authors would like to acknowledge Ignalina NPP for the opportunity to measure actual samples in general and, personally to Aleksandr Oryshaka, who is the head of the Radioactive Waste Management Department for his help and support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Plausinaitis, D., Knasiene, B., Prokopchik, A. et al. Simultaneous detection of Mn, Co, Ni, and Cu using ion chromatography coupled with ICP-MS with a special focus on the determination of 59Ni in corrosion deposits. J Radioanal Nucl Chem 316, 257–265 (2018). https://doi.org/10.1007/s10967-018-5759-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10967-018-5759-7