Journal of Radioanalytical and Nuclear Chemistry

, Volume 314, Issue 2, pp 637–649 | Cite as

Synthesis and characterisation of scintillating microspheres made of polystyrene/polycarbonate for 222Rn measurements

  • Eduard Pelay
  • Alex TarancónEmail author
  • Krasimir Mitev
  • Chavdar Dutsov
  • Strahil Georgiev
  • Ludmil Tsankov
  • José Francisco García


Several studies have demonstrated that polycarbonate-based polymers have good capacities for the absorption of 222Rn. Meanwhile, polystyrene polymers are reported to be the most appropriate for developing plastic scintillator materials for the detection of radioactivity. The objective of this work was to develop plastic scintillators in the form of microspheres (PSm) composed of polystyrene and polycarbonate that could be used to measure 222Rn and improve this performance thanks to the combination of characteristics of both polymers. Our results show that PSm of polystyrene and polycarbonate can be made via the evaporation/extraction method, despite the two polymers not being miscible. From the point of view of the radioactive measurements, we observed that the addition of polycarbonate causes quenching, although it does not significantly affect the detection efficiency for alpha and high-energy beta emitters. From the point of view of 222Rn absorption, we observed that synthesis of the PSm through the evaporation/extraction method changes the 222Rn absorption of the raw material. This result demonstrates that the method of production of the polymer and the resulting physical characteristics are a key parameter for its final 222Rn absorption properties.


Plastic scintillation microspheres 222Rn Polystyrene Polycarbonate 



We thank the Spanish Ministerio de Economia y Competitividad (MINECO) for financial support, under award CTM2014-02020 and the Catalan Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) for financial support under award 2014-SGR-1277. This work was also supported in part by the Bulgarian National Science Fund under contract DFNI T02/13 “POLYRAD”. The authors thank Tatiana Boshkova for performing the gamma spectrometry measurements and Philippe Cassette for suggesting the counting geometry for the LSC measurements of 222Rn.

Supplementary material

10967_2017_5488_MOESM1_ESM.pdf (751 kb)
Supplementary material 1 (PDF 750 kb)


  1. 1.
    International Atomic Energy Agency (2012) Protection of the public against exposure indoors due to natural sources of radiation. 112Google Scholar
  2. 2.
    WHO (2009) WHO handbook on indoor radon—a public health perspective. World Health Organization, GenevaGoogle Scholar
  3. 3.
    Gorchev HG, Ozolins G (2011) WHO guidelines for drinking-water quality. WHO Chron 38:104–108Google Scholar
  4. 4.
    The Council of the European Union (2013) Council Directive 2013/51/Euratom of 22 October 2013 laying down requirements for the protection of the health of the general public with regard to radioactive substances in water intended for human consumption. Off J Eur Union 296:12–21Google Scholar
  5. 5.
    L’Annunziata MF (2013) Handbook of Radioactivity Analisis. Academic Press, San DiegoGoogle Scholar
  6. 6.
    Pressyanov D, Dimitrova I, Mitev K, Georgiev S (2012) Handbook of radon: properties, applications, and health. Nova Science Publishers, New YorkGoogle Scholar
  7. 7.
    Mitev K, Zhivkova V, Pressyanov D et al (2014) Liquid scintillation counting of polycarbonates: a sensitive technique for measurement of activity concentration of some radioactive noble gases. Appl Radiat Isot 93:87–95CrossRefGoogle Scholar
  8. 8.
    Santiago LM, Tarancón A, García JF (2016) Influence of preparation parameters on the synthesis of plastic scintillation microspheres and evaluation of sample preparation. Adv Powder Technol 27:1309–1317CrossRefGoogle Scholar
  9. 9.
    Tarancon A, García JF, Rauret G (2002) Mixed waste reduction in radioactivity determination by using plastic scintillators. Anal Chim Acta 463:125–134CrossRefGoogle Scholar
  10. 10.
    Mitev K, Dimitrova I, Tarancón A et al (2016) Pilot study of the application of plastic scintillation microspheres to Rn-222 detection and measurement. IEEE Trans Nucl Sci 63:1209–1217CrossRefGoogle Scholar
  11. 11.
    Pressyanov D, Mitev K, Georgiev S et al (2017) Laboratory facility to create reference radon + thoron atmosphere under dynamic exposure conditions. J Environ Radioact 166:181–187CrossRefGoogle Scholar
  12. 12.
    Santiago LM, Bagán H, Tarancón A, Garcia JF (2013) Synthesis of plastic scintillation microspheres: evaluation of scintillators. Nucl Instrum Methods Phys Res Sect A 698:106–116CrossRefGoogle Scholar
  13. 13.
    Pressyanov D, Mitev K, Georgiev S, Dimitrova I (2009) Sorption and desorption of radioactive noble gases in polycarbonates. Nucl Instrum Methods Phys Res Sect A 598:620–627CrossRefGoogle Scholar
  14. 14.
    Mitev K, Cassette P, Georgiev S et al (2016) Determination of 222Rn absorption properties of polycarbonate foils by liquid scintillation counting. Application to 222Rn measurements. Appl Radiat Isot 109:270–275CrossRefGoogle Scholar
  15. 15.
    Ghorbel E, Hadriche I, Casalino G, Masmoudi N (2014) Characterization of thermo-mechanical and fracture behaviors of thermoplastic polymers. Materials (Basel) 7:375–398CrossRefGoogle Scholar
  16. 16.
    Santiago LM, Bagán H, Tarancón A et al (2013) Systematic study of particle quenching in organic scintillators. Nucl Instrum Methods Phys Res Sect A 698:26–36CrossRefGoogle Scholar

Copyright information

© Akadémiai Kiadó, Budapest, Hungary 2017

Authors and Affiliations

  1. 1.Department of Chemical Engineering and Analytical ChemistryUniversity of BarcelonaBarcelonaSpain
  2. 2.Faculty of PhysicsSofia University “St. Kliment Ohridski”SofiaBulgaria
  3. 3.Serra-Húnter ProgramGeneralitat de CatalunyaBarcelonaSpain

Personalised recommendations