Abstract
This paper extends previous work for decision levels to detection limits. After transforming the net count to an integer, the probability density function for the transformed net count can be readily determined when the transformed net count is greater than zero. The right tail of the distribution is summed and the detection limit is determined to four decimal places. The code under discussion works well when the product of the ratio of the blank count time to the sample count time with the expected blank count in the sample count time is not greater than 100.0.
Similar content being viewed by others
References
W. E. Potter, J. Radioanal. Nucl. Chem., 263 (2005) 321.
B. Potter, J. Strzelczyk, Radiat. Prot. Managem., 22 (2005) 18.
A. Brodsky, Health Phys., 63 (1992) 198.
L. A. Currie, Lower Limit of Detection: Definition and Elaboration of a Proposed Position for Radiological Effluent and Environmental Measurements, Report No. NUREG/CR-4007, Nuclear Regulatory Commission, Washington, DC, 1984.
S. L. Meyer, Data Analysis for Scientists and Engineers, John Wiley & Sons, New York, 1975, p. 213.
W. E. Potter, Code for Neyman-Pearson confidence intervals with arbitrary levels of confidence, in: Radiation Safety and ALARA Considerations for the 21st Century, Proc. of the 34th Midyear Topical Meeting of the Health Physics Society, Medical Physics Publishing, Madison, 2001, p. 109.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Potter, W.E., Strzelczyk, J. Computer code for detection limits and type II errors with unequal sample and blank counting times. J Radioanal Nucl Chem 276, 313–316 (2008). https://doi.org/10.1007/s10967-008-0504-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10967-008-0504-2