Abstract
Solid phase extraction (SPE) plays an important role in chemical and biological analysis. Compared with liquid–liquid extraction, SPE has the advantages of low solvent consumption, high efficiency, low cost, convenient operation and short time-consuming. However, the adsorbent used in SPE usually shows poor selectivity. The molecularly imprinted polymers (MIPs), which is similar to the binding of antigen and antibody, has specific adsorption capability to the specific molecules. Using MIP as the adsorbent of SPE prepared molecularly imprinted solid phase extraction (MISPE), can significantly improve the selectivity of SPE. MISPE has been widely used in separation, enrichment, pretreatment and detection. In this review, various modes of MISPE are systematically introduced, including off-line MISPE, on-line MISPE, molecularly imprinted-dispersive SPE, molecularly imprinted-matrix solid phase dispersion and magnetic MISPE. In addition, the applications of MISPE in food safety, environmental monitoring, drug and biological samples analysis are also reviewed.
Similar content being viewed by others
Availability of data and material
Not applicable.
Code availability
Not applicable.
References
Chen L et al (2016) Molecular imprinting: perspectives and applications. Chem Soc Rev 2016 45:2137–2211
Wen Y et al (2014) Recent advances in solid-phase sorbents for sample preparation prior to chromatographic analysis. Trends Analyt Chem 59
Wang Y et al (2012) HPLC determination of aflatoxin m1 in liquid milk and milk powder using solid phase extraction on OASIS HLB. Food Control 28(1):131–134
Yun L et al (2011) Preparation and evaluation of hydrophilic C18 monolithic sorbents for enhanced polar compound retention in liquid chromatography and solid phase extraction. J Chromatogr A 1218(48):8608–8616
Alberti G et al (2012) Beyond the synthesis of novel solid phases: Review on modelling of sorption phenomena. Coord Chem Rev 256(1–2):28–45
Belbruno JJ (2019) Molecularly Imprinted Polymers. Chem Rev 119(1):94–119
Lofgreen J et al (2014) Controlling morphology and porosity to improve performance of molecularly imprinted sol-gel silica. Chem Soc Rev
Wang C, Qi L, Liang R (2021) A molecularly imprinted polymer-based potentiometric sensor based on covalent recognition for the determination of dopamine. Anal Methods 13:620–625
Pavel H, Jan Ř (2016) Introduction: Noncovalent Interactions. Chem Rev 116(9):4911
Wang L et al (2016) Synthesis of mimic molecularly imprinted ordered mesoporous silica adsorbent by thermally reversible semicovalent approach for pipette-tip solid-phase extraction-liquid chromatography fluorescence determination of estradiol in milk. J Chromatogr A 1456:58–67
Notni J, Wester H (2016) A Practical Guide on the Synthesis of Metal Chelates for Molecular Imaging and Therapy by Means of Click Chemistry. Chemistry 22(33):11500–11508
Arabi M et al (2020) Strategies of molecular imprinting-based solid-phase extraction prior to chromatographic analysis. TrAC Trends Analyt Chem 128:115923
Lawrence et al (2018) Applications of molecularly imprinted polymers for solid-phase extraction of non-steroidal anti-inflammatory drugs and analgesics from environmental waters and biological samples. J Pharm Biomed Anal 147:624–633
Tamayo FG, Turiel E, Martín-Esteban A (2007) Molecularly imprinted polymers for solid-phase extraction and solid-phase microextraction: recent developments and future trends. J Chromatogr A 1152(1–2):32–40
Silva MS et al (2020) Molecularly Imprinted Solid Phase Extraction Aiding the Analysis of Disease Biomarkers. Crit Rev Anal Chem 1843131:11–16
Garcia R, Silva M, Cabrita MJ (2018) "On-off" switchable tool for food sample preparation: merging molecularly imprinting technology with stimuli-responsive blocks. Current status, challenges and highlighted applications. Talanta 176:479
Yang YK et al (2020) Magnetic molecularly imprinted electrochemical sensors: A review. Anal Chim Acta 2020 1106:1–21
Yu D et al (2015) Dummy molecularly imprinted mesoporous silica prepared by hybrid imprinting method for solid-phase extraction of bisphenol A. J Chromatogr A 1396:17–24
Pap T et al (2002) Effect of solvents on the selectivity of terbutylazine imprinted polymer sorbents used in solid-phase extraction. J Chromatogr A 973(1–2):1–12
Hrzanowska AM, Poliwoda A, Wieczorek PP (2015) Surface molecularly imprinted silica for selective solid-phase extraction of biochanin A, daidzein and genistein from urine samples. J Chromatogr A 1392:1–9
Zhang XY, Hai-Peng Y U, Liu JH (2009) Solid phase extraction of food contaminants using molecular imprinted polymers. Science and Technology of Food Industry.
Claudio B, Laura A (2007) Cristina G (2007) Solid phase extraction of food contaminants using molecular imprinted polymers. Anal Chim Acta 591(1):29–39
Caro E et al (2006) Application of molecularly imprinted polymers to solid-phase extraction of compounds from environmental and biological samples. TrAC, Trends Anal Chem 25(2):143–154
Shi X et al (2012) Group-selective enrichment and determination of pyrethroid insecticides in aquaculture seawater via molecularly imprinted solid phase extraction coupled with gas chromatography-electron capture detection. J Chromatogr A 1227:60–66
Javanbakht M et al (2010) Solid-phase extraction of tramadol from plasma and urine samples using a novel water-compatible molecularly imprinted polymer. J Chromatogr, B: Anal Technol Biomed Life Sci 878(20):1700–1706
Yilmaz V et al (2014) Selective solid phase extraction of copper using a new Cu(II)-imprinted polymer and determination by inductively coupled plasma optical emission spectroscopy (ICP-OES). Microchem J 114:65–72
Zhang X et al (2013) LED-induced in-column molecular imprinting for solid phase extraction/capillary electrophoresis. Analyst 138(10):2821–2824
Soleimani M et al (2012) Synthesis of molecularly imprinted polymer as a sorbent for solid phase extraction of bovine albumin from whey, milk, urine and serum. Microchem J 100:1–7
Tóth B, Horvai G (2010) Chromatography, Solid-Phase Extraction, and Capillary Electrochromatography with MIPs. Top Curr Chem
Spégel P, Schweitz L, Nilsson S (2010) Molecularly imprinted polymers in capillary electrochromatography: Recent developments and future trends. Electrophoresis 24(22–23):3892–3899
Dong C et al (2020) Molecularly imprinted polymers by the surface imprinting technique. Eur Polym J
Zeng H et al (2020) Rational design and synthesis of molecularly imprinted polymers (MIP) for purifying tylosin by seeded precipitation polymerization. Process Biochem 94
Nabavi SA et al (2017) Synthesis of Size-Tunable CO2-Philic Imprinted Polymeric Particles (MIPs) for Low-Pressure CO2 Capture Using Oil-in-Oil Suspension Polymerization. Environ Sci Technol 51(19)
Pardeshi S, Singh SK (2016) Precipitation polymerization: a versatile tool for preparing molecularly imprinted polymer beads for chromatography applications. RSC Adv 6(17):23525–23536
Pidenko PS et al (2020) Molecularly imprinted polyaniline for detection of horseradish peroxidase. Anal Bioanal Chem
Vasconcelos I et al (2020) Synthesis and characterization of a molecularly imprinted polymer (MIP) for solid-phase extraction of the antidiabetic gliclazide from human plasma. Mater Sci Eng C 116:111191
Liu X et al (2018) Synthesis of molecularly imprinted polymer by suspension polymerization for selective extraction of p -hydroxybenzoic acid from water. J Appl Polym Sci 136
Masqué N et al (2000) Synthesis and evaluation of a molecularly imprinted polymer for selective on-line solid-phase extraction of 4-nitrophenol from environmental water. Anal Chem 72(17):4122
Liu X, Sun XL, Cao J (2021) Simultaneous determination of eight carbamate pesticide residues in tomato, rice and cabbage by online solid phase extraction/purification-high performance liquid chromatography-tandemmass spectrometry. Chin J Chromatogr
Tao J et al (2011) Online coupling of molecularly imprinted solid-phase extraction to HPLC for determination of trace tetracycline antibiotic residues in egg samples. J Sep Sci 34(12):1469–1476
Lv YK et al (2013) Preparation and evaluation of a novel molecularly imprinted hybrid composite monolithic column for on-line solid-phase extraction coupled with HPLC to detect trace fluoroquinolone residues in milk. Anal Methods 5(7):1848–1855
Sun YK et al (2019) Cost-effective imprinting to minimize consumption of template in room-temperature ionic liquid for fast purification of chlorogenic acid from the extract of E. ulmoides leaves. Anal and Bioanal Chem 411(6):1–11
Emara S et al (2013) Online Pre-Column Derivatization with Chromatographic Separation to Determine Folic Acid. J Chromatogr Sci 2013 6:544–551
Lv YK et al (2014) Determination of Tetracyclines Residues in Egg, Milk, and Milk Powder by Online Coupling of A Precolumn Packed with Molecular Imprinted Hybrid Composite Materials to RP-HPLC-UV. J Liq Chromatogr Relat Technol 2014
Lordel MS et al (2013) Identification of the nitroaromatic explosives in post-blast samples by online solid phase extraction using molecularly imprinted silica sorbent coupled with reversed-phase chromatography. Anal Bioanal Chem 405(15):5237–5247
Baeza FAN et al (2019) Multi-residue analysis of sulfonamide antibiotics in honey samples by on-line solid phase extraction using molecularly imprinted polymers coupled to liquid chromatography-tandem mass spectrometry. J Liq Chromatogr Relat Technol 1–11
Anastasiades M (2003) Fast and easy multiresidue method employing acetonitrile extraction/partitioning and "dispersive solid-phase extraction" for the determination of pesticide residues in produce. J Aoac Int 86
He Y et al (2019) Magnetic molecularly imprinted polymers for the detection of aminopyralid in milk using dispersive solid-phase extraction. RSC Adv 9
Lu W et al (2019) Dual-template molecularly imprinted polymers for dispersive solid-phase extraction of fluoroquinolones in water samples coupled with high performance liquid chromatography. Analyst
Ścigalski P, Kosobucki P (2020) Recent materials developed for dispersive solid phase extraction. Molecules 22;25(21):4869
Barker SA (1998) Matrix solid-phase dispersion. J Chromatogr A 885(1–2):115–127
Liang T et al (2019) Determination of Sulfonylurea Herbicides in Grain Samples by Matrix Solid-Phase Dispersion with Mesoporous Structured Molecularly Imprinted Polymer. Food Anal Methods 2(9)
Gholami H et al (2019) Application of Molecularly Imprinted Biomembrane for Advancement of Matrix Solid-Phase Dispersion for Clean Enrichment of Parabens from Powder Sunscreen Samples: Optimization of Chromatographic Conditions and Green Approach. ACS Omega 4(2):3839–3849
Tu XJ, Chen WB (2018) A Review on the Recent Progress in Matrix Solid Phase Dispersion. Molecules 23(11):2767
Bazmandegan SA et al (2016) High-Performance Liquid Chromatographic Determination of Diazinon after Its Magnetic Dispersive Solid-Phase Microextraction Using Magnetic Molecularly Imprinted Polymer. Food Anal Methods 9(9):2621–2630
Fan S et al (2017) Co-solvent enhanced adsorption with magnetic velvet-like carbon nitride for high efficiency solid phase extraction. Anal Chim Acta 1(960):63–71
Jayasinghe GDTM, Moreda PA (2021) Molecularly Imprinted Polymers for Dispersive (Micro) Solid Phase Extraction: A Review. Separations 8:99
King T et al (2017) Food safety for food security: Relationship between global megatrends and developments in food safety. Trends in Food Science & Technology
Vandenberg LN et al (2007) Human exposure to bisphenol A (BPA). Reprod Toxicol 24(2):139–177
Zhou XH et al (2017) A Review of Methods for Detecting Melamine in Food Samples. Crit Rev Anal Chem 47(1):51–66
Chen J, Ying GG, Deng WJ (2019) Antibiotic Residues in Food: Extraction, Analysis, and Human Health Concerns. J Agric Food Chem 67(27):7569
Chen X, Liu J (2020) Fiscal decentralization and environmental pollution: A Spatial Analysis. Discrete Dyn Nat Soc
Wang Q, Yang Z (2016) Industrial water pollution, water environment treatment, and health risks in China. Environ Pollut 218:358–365
Hu T et al (2020) Recent advances and applications of molecularly imprinted polymers in solid–phase extraction for real sample analysis. J Sep Sci
Tang YW et al (2016) Determination of clenbuterol in pork and potable water samples by molecularly imprinted polymer through the use of covalent imprinting method. Food Chem 190:952
Ma W, Row KH (2020) Solid-Phase Extraction of Catechins from Green Tea with Deep Eutectic Solvent Immobilized Magnetic Molybdenum Disulfide Molecularly Imprinted Polymer. Molecules 25(2)
Ji S et al (2018) A hollow porous molecularly imprinted polymer as a sorbent for the extraction of 7 macrolide antibiotics prior to their determination by HPLC-MS/MS. Microchim Acta 185(3):1–9
Zhou Y et al (2015) Rapid and selective extraction of multiple macrolide antibiotics in foodstuff samples based on magnetic molecularly imprinted polymers. Talanta 137:1–10
Thongchai W, Liawruangrath B (2016) Determination of gamma oryzanol in rice bran oil by HPLC with molecularly imprinted solid-phase extraction. Int Food Res J 23(4):1389–1395
Soledad RB et al (2016) Effective determination of ampicillin in cow milk using a molecularly imprinted polymer as sorbent for sample preconcentration. Food Chem 432
Wang H et al (2018) Selective recognization of dicyandiamide in bovine milk by mesoporous silica SBA-15 supported dicyandiamide imprinted polymer based on surface molecularly imprinting technique. Food Chem 240:1262–1267
Lata K et al (2015) Synthesis and application of cephalexin imprinted polymer for solid phase extraction in milk. Food Chem 184:176–182
Sorouraddin SM, Mogaddam MA (2016) Development of molecularly imprinted-solid phase extraction combined with dispersive liquid–liquid microextraction for selective extraction and preconcentration of triazine herbicides from aqueous samples. J Iran Chem Soc 13(6):1093–1104
Bayat M, Hassanzadeh KM, Mohajeri SA (2015) Determination of Diazinon Pesticide Residue in Tomato Fruit and Tomato Paste by Molecularly Imprinted Solid-Phase Extraction Coupled with Liquid Chromatography Analysis. Food Anal Methods 8(4):1034–1041
Qi P et al (2015) Molecularly imprinted solid-phase extraction coupled with HPLC for the selective determination of monobutyl phthalate in bottled water. J Sep Sci 34(19):2712–2718
Yang J et al (2018) A Phenolphthalein-Dummy Template Molecularly Imprinted Polymer for Highly Selective Extraction and Clean-Up of Bisphenol A in Complex Biological, Environmental and Food Samples. Polymers 10(10)
Samanidou V et al (2016) Matrix molecularly imprinted mesoporous sol–gel sorbent for efficient solid-phase extraction of chloramphenicol from milk. Anal Chim Acta 2016:62–74
Peng M et al (2018) Magnetic Porous Molecularly Imprinted Polymers Based on Surface Precipitation Polymerization and Mesoporous SiO2 Layer as Sacrificial Support for Efficient and Selective Extraction and Determination of Chlorogenic Acid in Duzhong Brick Tea. Molecules 23(7):1554
Urraca JL et al (2016) Development of magnetic molecularly imprinted polymers for selective extraction: determination of citrinin in rice samples by liquid chromatography with UV diode array detection. Anal Bioanal Chem 408(11):3033–3042
Duhoranimana et al (2017) Selective extraction of methenamine from chicken eggs using molecularly imprinted polymers and LC-MS/MS confirmation. Food Control
Li X, Row KH (2017) Application of Deep Eutectic Solvents in Hybrid Molecularly Imprinted Polymers and Mesoporous Siliceous Material for Solid-Phase Extraction of Levofloxacin from Green Bean Extract. Anal Sci 33(5):611–617
Wang L et al (2017) Molecularly Imprinted Polymers for Selective Extraction of Oblongifolin C from Garcinia yunnanensis Hu. Molecules 22(4):508
Oratile et al (2017) Development of an aflatoxin B1 specific molecularly imprinted solid phase extraction sorbent for the selective pre-concentration of toxic aflatoxin B1 from child weaning food. Tsabana Molecular Imprinting 5(1):1–15
Row et al (2017) Purification of antibiotics from the millet extract using hybrid molecularly imprinted polymers based on deep eutectic solvents. Rsc Adv
Garcia MMA et al (2017) Synthesis and characterization of a molecularly imprinted polymer for the determination of spiramycin in sheep milk. Food Chem 221:721
Zhou Q et al (2018) Preparation and characterization of molecularly imprinted solid-phase extraction column coupled with high-performance liquid chromatography for selective determination of melamine. R Soc Open Sci 5(9)
Atlabachew M et al (2016) A (−)-norephedrine-based molecularly imprinted polymer for the solid-phase extraction of psychoactive phenylpropylamino alkaloids from Khat (Catha edulis Vahl. Endl.) chewing leaves. Biomed Chromatogr
Chang T et al (2017) Magnetic Dummy Template Silica Sol–Gel Molecularly Imprinted Polymer Nanospheres as Magnetic Solid-Phase Extraction Material for the Selective and Sensitive Determination of Bisphenol A in Plastic Bottled Beverages. Food Anal Methods
Mueller A (2014) Analysis of fusaric acid in maize using molecularly imprinted solid phase extraction (MISPE) clean-up and ion-pair LC with diode array UV detection). Acs National Meeting Book of Abstracts
Jlds A et al (2020) Non-enzymatic lactose molecularly imprinted sensor based on disposable graphite paper electrode - ScienceDirect. Analytica Chimica Acta
Ahaha B et al (2019) Biomimetic magnetic sensor for electrochemical determination of scombrotoxin in fish. Talanta 194:997–1004
Kadhirvel P et al (2019) Development and application of water-compatible molecularly imprinted polymers for the selective extraction of carbamazepine from environmental waters. Anal Bioanal Chem
Song X et al (2020) Synthesis of Molecularly Imprinted Polymers for the Selective Extraction of Polymyxins from Environmental Water Samples. Polymers 12(3):594
Madikizela LM, Mdluli PS, Chimuka L (2017) An initial assessment of naproxen, ibuprofen and diclofenac in Ladysmith water resources in South Africa using molecularly imprinted solid-phase extraction followed by high performance liquid chromatography-photodiode array detection. S Afr J Chem 70(1)
Mei XQ, He XP, Wang JT (2016) Molecularly imprinted polymer as efficient sorbent of solid-phase extraction for determination of gonyautoxin 1,4 in seawater followed by high-performance liquid chromatography-fluorescence detection. Anal bioanal chem 408(21)
Rao W et al (2014) Magnetic dummy molecularly imprinted polymers based on multi-walled carbon nanotubes for rapid selective solid-phase extraction of 4-nonylphenol in aqueous samples. Talanta 128:170–176
Foguel MV et al (2017) Synthesis and evaluation of a molecularly imprinted polymer for selective adsorption and quantification of Acid Green 16 textile dye in water samples. Talanta 170:244
Poliwoda A, Mościpan M, Wieczorek PP (2016) Application of Molecular Imprinted Polymers for Selective Solid Phase Extraction of Bisphenol A. Ecol Chem Eng S 23(4)
Madikizela LM, Chimuka L (2016) Determination of ibuprofen, naproxen and diclofenac in aqueous samples using a multi-template molecularly imprinted polymer as selective adsorbent for solid-phase extraction. J Pharm Biomed Anal 210–215
Li J et al (2017) Iron-based magnetic molecular imprinted polymers and their application in removal and determination of di-n-pentyl phthalate in aqueous media. R Soc Open Sci 4(8):170672
Song X et al (2018) Determination of Ten Macrolide Drugs in Environmental Water Using Molecularly Imprinted Solid-Phase Extraction Coupled with Liquid Chromatography-Tandem Mass Spectrometry. Molecules 23(5):1172
Florea A et al (2015) Electrochemical sensor for the detection of estradiol based on electropolymerized molecularly imprinted polythioaniline film with signal amplification using gold nanoparticles. Electrochem Commun
Masi SD et al (2019) Synthesis and Application of Ion-Imprinted Nanoparticles in Electrochemical Sensors for Copper (II) Determination. Chem Nano Mat
Barati A et al (2017) Synthesis/characterization of molecular imprinted polymer based on magnetic chitosan/graphene oxide for selective separation/preconcentration of fluoxetine from environmental and biological samples. J Ind Eng Chem 46:212–221
Haeri SA, Abbasi S (2016) Biocoacervation extraction combined with dispersive solid phase extraction using a reversed-phase core–shell magnetic molecularly imprinted sorbent for 2,4-dichlorophenoxyacetic acid prior to its determination by HPLC. J Iran Chem Soc 13(11):1–7
Thongchai W, Fukngoen P (2018) Synthesis of curcuminoid-imprinted polymers applied to the solid-phase extraction of curcuminoids from turmeric samples. J Pharm Anal 8(1):61–70
Olcer YA et al (2017) Development of molecularly imprinted polymers (MIPs) as a solid phase extraction (SPE) sorbent for the determination of ibuprofen in water. RSC Adv 7(50):31441–31447
Ahmadi R, Noroozian E, Jassbi AR (2020) Molecularly imprinted polymer solid-phase extraction for the analysis of 1,8-cineole in thyme and sagebrush distillates. J Iran Chem Soc 17(5)
Ganjavi F et al (2018) Computational design, synthesis and utilization of a magnetic molecularly imprinted polymer on graphene oxide nanosheets for highly selective extraction and determination of buprenorphine in biological fluids and tablets. Anal Methods 10(43):5214–5226
Ersoy SK et al (2016) Preparation, characterization and usage of molecularly imprinted polymer for the isolation of quercetin from hydrolyzed nettle extract. J Chromatogr B
Wang C et al (2017) Preparation of ionic liquid-mediated imprinted monolith for selective capture and purification of corilagin. J Chromatogr B 1041–1042:98–103
Mckitterick N et al (2020) Magnetic Synthetic Receptors for Selective Clean-Up in Protein Biomarker Quantification. J Proteome Res 19(8):3573–3582
Xiao H et al (2020) Magnetic mesoporous silica/graphene oxide based molecularly imprinted polymers for fast selective separation of bovine hemoglobin. SN Applied Sciences 2(4):1–12
Ten DI et al (2017) Molecularly imprinted polymers for selective solid-phase extraction of phospholipids from human milk samples. Microchim Acta 184:3389–3397
Santos MG et al (2015) Direct doping analysis of beta-blocker drugs from urinary samples by on-line molecularly imprinted solid-phase extraction coupled to liquid chromatography/mass spectrometry. Analyst 140
Ansari S, Ghorbani A (2016) Molecularly imprinted polymers (MIP) for selective solid phase extraction of celecoxib in urine samples followed by high performance liquid chromatography. J Chem Health Risks
Ansari S (2017) Application of hollow porous molecularly imprinted polymers using K2Ti4O9 coupled with SPE-HPLC for the determination of celecoxib in human urine samples: optimization by central composite design (CCD). Anal Methods 9:3200–3212
Yang JJ et al (2015) Molecularly imprinted polymer microspheres prepared by Pickering emulsion polymerization for selective solid-phase extraction of eight bisphenols from human urine samples-ScienceDirect. Anal Chim Acta 872:35–45
Sorribes SA et al (2017) Cocaine abuse determination by ion mobility spectrometry using molecular imprinting. J Chromatogr A 1481:23–30
He H et al (2015) Molecularly imprinted polymers based on SBA-15 for selective solid-phase extraction of baicalein from plasma samples. Anal Bioanal Chem 407(2):509–519
Silva ATMD et al (2017) Efficient molecularly imprinted polymer as a pipette-tip solid-phase sorbent for determination of carvedilol enantiomers in human urine. J Chromatogr, B: Anal Technol Biomed Life Sci 1061–1062:399–410
Karimi et al (2016) Preparation of Magnetic Molecularly Imprinted Polymer Nanoparticles for Selective Adsorption and Separation of beta-Estradiol. J Cluster Sci 27:1067–1080
Wei Z et al (2017) Preparation, characterization and application of a molecularly imprinted polymer for selective recognition of sulpiride. Materials 10(5):475
Lay S et al (2016) Molecularly imprinted polymers as the extracted sorbents of clenbuterol ahead of liquid chromatographic determination. J Zhejiang Univ Sci B 17(6):465–475
Giacomo L (2020) A rapid HPLC-FLD method for Ochratoxin A detection in pig muscle, kidney, liver by using enzymatic digestion with MISPE extraction. MethodsX 7
Chen H et al (2020) Hierarchically Molecular Imprinted Porous Particles for Biomimetic Kidney Cleaning. Adv Mater
Mirmahdieh S et al (2015) Analysis of testosterone in human urine using molecularly imprinted solid-phase extraction and corona discharge ion mobility spectrometry. J Sep Sci 34(1):107–112
Feier B et al (2019) Electrochemical Sensor Based on Molecularly Imprinted Polymer for the Detection of Cefalexin. Biosensors 9:31
Funding
This work was supported by the National Natural Science Foundation of China (21576295 and 21804143); Fundamental Research Funds for Central Universities of the Central South University (2020zzts064); and the Natural Science Foundation of Hunan Province (2020JJ4686 and 2019JJ50759).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Ethics approval
Not applicable.
Informed Consent Statement
Not applicable.
Institutional Review Board Statement
Not applicable.
Conflicts of Interest
The author declares no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wan, Q., Liu, H., Deng, Z. et al. A critical review of molecularly imprinted solid phase extraction technology. J Polym Res 28, 401 (2021). https://doi.org/10.1007/s10965-021-02744-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10965-021-02744-2