Skip to main content

Advertisement

Log in

Polyester resins based on soybean oil: synthesis and characterization

  • ORIGINAL PAPER
  • Published:
Journal of Polymer Research Aims and scope Submit manuscript

Abstract

Discovering renewable energy resources is receiving increased attention both in industrial and academic research. Vegetable oils are a promising route to renewable chemicals and polymers due to their ready availability, inherent biodegradability, and low toxicity. Also, bio-renewable fuels have been prepared from vegetable oils. Here, the soy oil monoglyceride has been obtained from the soybean oil by alcoholysis, and its structure was confirmed by the spectral analyses. To increase the yield of the monoglyceride formation and to prevent the ester interchange reversible reaction, we found that rapid cooling of the mixture with high-speed stirring allowed the best yield of soy oil monoglyceride. Then, three new polyester resins have been synthesized by the reaction of the monoglyceride with phthalic and/or maleic anhydrides with different ratios. The synthesized resins have been characterized by spectral analyses, and their morphological and physico-chemical properties such as acid value, iodine value, volatile matter content, and viscosity have been studied. The three polyester resins were soluble in common organic solvents. The effect of phthalic and maleic anhydrides ratio on the physical and chemical properties of the resin was also studied. The incorporation of maleic anhydride decreases the iodine value of the resins compared to phthalic anhydride-based resin.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Scheme 1
Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  1. Eissen M, Metzger JO, Schmidt E, Schneidewind U (2002) 10 years after Rio-concepts on the contribution of chemistry to a sustainable development. Angew Chemie Int Ed 41:414–436. https://doi.org/10.1002/1521-3773(20020201)41:3<414::AID-ANIE414>3.0.CO;2-N

    Article  CAS  Google Scholar 

  2. Bozell JJ (2008) Feedstocks for the future - biorefinery production of chemicals from renewable carbon. CLEAN - Soil, Air, Water 36:641–647. https://doi.org/10.1002/clen.200800100

    Article  CAS  Google Scholar 

  3. Williams CK, Hillmyer MA (2008) Polymers from renewable resources: a perspective for a special issue of polymer reviews. Polym Rev 48:1–10. https://doi.org/10.1080/15583720701834133

    Article  CAS  Google Scholar 

  4. Can E, Küsefoǧlu S, Wool RP (2001) Rigid, thermosetting liquid molding resins from renewable resources. I Synthesis and polymerization of soy oil monoglyceride maleates. J Appl Polym Sci 81:69–77. https://doi.org/10.1002/app.1414

    Article  CAS  Google Scholar 

  5. Worldwide production major vegetable oils, 2012–2019 | Statista. https://www.statista.com/statistics/263933/production-of-vegetable-oils-worldwide-since-2000/. Accessed 3 Jan 2020

  6. Sun J, Aly KI, Kuckling D (2017) Synthesis of hyperbranched polymers from vegetable oil based monomers via ozonolysis pathway. J Polym Sci Part A Polym Chem 55:2104–2114. https://doi.org/10.1002/pola.28600

    Article  CAS  Google Scholar 

  7. Belgacem MN, Gandini A (2008) Monomers, polymers and composites from renewable resources. Elsevier, Amsterdam

    Google Scholar 

  8. Lligadas G, Ronda JC, Galià M, Cádiz V (2013) Renewable polymeric materials from vegetable oils: a perspective. Mater Today 16:337–343. https://doi.org/10.1016/j.mattod.2013.08.016

    Article  CAS  Google Scholar 

  9. Van MR, Mark D, Sandefur K (2005) Industrial uses of vegetable oil. AOCS Press, Peoria, IL

    Google Scholar 

  10. Demirbas A (2010) New biorenewable fuels from vegetable oils. Energy Sources, Part A Recover Util Environ Eff 32:628–636. https://doi.org/10.1080/15567030903058832

    Article  CAS  Google Scholar 

  11. Aly KI (2004) New polymer syntheses XXVIII. Synthesis and thermal behavior of new organometallic polyketones and copolyketones based on diferrocenylidenecyclohexanone. J Appl Polym Sci 94:1440–1448. https://doi.org/10.1002/app.21049

    Article  CAS  Google Scholar 

  12. Al-Muaikel NS, Aly KI, Hussein MA (2008) Synthesis, characterization and antimicrobial properties of new poly(ether-ketone)s and copoly(ether-ketone)s containing diarylidenecycloalkanone moieties in the main chain. J Appl Polym Sci 108:3138–3147. https://doi.org/10.1002/app.27963

    Article  CAS  Google Scholar 

  13. Aly KI, Hussein MA (2015) Synthesis, characterization and corrosion inhibitive properties of new thiazole based polyamides containing diarylidenecyclohexanone moiety. Chinese J Polym Sci (English Ed) 33:1–13. https://doi.org/10.1007/s10118-015-1569-3

    Article  CAS  Google Scholar 

  14. Abd-Alla MA, Aly KI (1991) Arylidene polymers. IX. Synthesis, characterization, and morphology of new polyesters of diarylidenecycloalkanones containing thianthrene units. J Macromol Sci Part A - Chem 28:251–267. https://doi.org/10.1080/00222339108052141

    Article  Google Scholar 

  15. Aly KI, Khalaf AA, Alkskas IA (2003) New polymer syntheses XII. Polyketones based on diarylidenecycloalkanones. Eur Polym J 39:1273–1279. https://doi.org/10.1016/S0014-3057(02)00365-8

    Article  CAS  Google Scholar 

  16. Aly KI (2000) Liquid crystalline polymers. 3. Synthesis and liquid crystal properties of thermotropic poly(arylidene-ether)s and copolymers containing cycloalkanone moiety in the polymer backbone. J Macromol Sci Part A 37:93–115. https://doi.org/10.1081/MA-100101083

    Article  Google Scholar 

  17. Aly KI, Ahmed RA (2010) Liquid crystalline polymers V. Thermotropic liquid crystalline poly(azomethine-ether)s containing a cycloalkanone moiety in the polymer backbone (Article) 27(4):451–45

  18. Aly KI (2004) New polymer syntheses xxviii. synthesis and thermal behavior of new organometallic polyketones and copolyketones based on diferrocenylidenecyclohexanone (Article). J Appl Polym 94(4):1440–1448

  19. Aly KI, Abbady MA, Mahgoub SA, Hussein MA (2002) New polymer syntheses. Part 14. Synthesis and properties of new polyketoamine polymers containing cycloalkanone moieties in the main chain (Article). Polym Int 51(2):125–133

  20. Aly KI, Younis O, Mahross MH, Tsutsumi O, Mohamed MG, Sayed MM (2019) Novel conducting polymeric nanocomposites embedded with nanoclay: synthesis, photoluminescence, and corrosion protection performance. Polym J 51:77–90. https://doi.org/10.1038/s41428-018-0119-6

    Article  CAS  Google Scholar 

  21. Aly KI, Mohamed MG, Younis O, Mahross MH, Abdel-Hakim M, Sayed MM (2019) Salicylaldehyde azine-functionalized polybenzoxazine: synthesis, characterization, and its nanocomposites as coatings for inhibiting the mild steel corrosion. Prog Org Coatings 138:105385. https://doi.org/10.1016/j.porgcoat.2019.105385

    Article  CAS  Google Scholar 

  22. Aly KI, Younis O, Mahross MH, Orabi EA, Abdel-Hakim M, Tsutsumi O, Mohamed MG, Sayed MM (2019) Conducting copolymers nanocomposite coatings with aggregation-controlled luminescence and efficient corrosion inhibition properties. Prog Org Coatings 135:525–535. https://doi.org/10.1016/j.porgcoat.2019.06.001

    Article  CAS  Google Scholar 

  23. Aly KI, Younis O, Al-Muaikel NS, et al (2019) Novel copolyhydrazides and copolyoxadiazoles based on 1,4-phenyl linkage and 1,3,4-thiadiazole moiety in the polymer Main chain to induce glass transition and to improve the thermal stability, solubility, and antimicrobial activity. J Polym Res 26: https://doi.org/10.1007/s10965-019-1712-x

  24. Aly KI, Younis O, Al-Muaikel NS et al (2019) Novel polyhydrazides and polyoxadiazoles based on 1,3,4-thiadiazole moiety in the main chain with high thermal stability, good solubility, and notable antimicrobial activity. J Appl Polym Sci 136:47770–47779. https://doi.org/10.1002/app.47770

    Article  CAS  Google Scholar 

  25. Abd-Alla MA, Aly KI (1992) Arylidene polymers. Xvii. Cyclization of aromatic poly[dibenzylidenecyclopentanone-hydrazide] as a route to polyheterocyclic 1,3,4-oxadiazole and 1,2,4-triazole. J Macromol Sci Part A 29:185–192. https://doi.org/10.1080/00222339208052119

    Article  Google Scholar 

  26. Aly KI, Sayed MM, Mohamed MG et al (2020) A facile synthetic route and dual function of network luminescent porous polyester and Copolyester containing Porphyrin moiety for metal ions sensor and dyes adsorption. Microporous Mesoporous Mater 110063. https://doi.org/10.1016/j.micromeso.2020.110063

  27. Aly KI, Abdel-Rahman MA, Qutai MM (2018) Photoactive linear and hyperbranched polyesters based on 4-methylcyclohexanone and 4-tert-butylcyclohexanone moieties in the main chain: synthetic methodology, characterization and cytotoxicity. J Polym Res 25:1–15. https://doi.org/10.1007/s10965-018-1579-2

    Article  CAS  Google Scholar 

  28. Aly KI, Hussein MA (2010) New polymer syntheses, part 45: corrosion inhibition behavior of novel polyurea derivatives based on diarylidenecycloalkanone moieties in the polymers backbone. J Polym Res 17:607–620. https://doi.org/10.1007/s10965-009-9349-9

    Article  CAS  Google Scholar 

  29. Konwer D, Taylor SE, Gordon BE, Otvos JW, Calvin M (1989) Liquid fuels from Mesua ferrea L. seed oil. J Am Oil Chem Soc 66:223–226. https://doi.org/10.1007/BF02546064

    Article  CAS  Google Scholar 

  30. Goodman I, Rhys JA (1965) Polyesters: saturated polymers. Iliffe Books, London

    Google Scholar 

  31. Malshe VC, Sikchi M (2004) Basics of paint technology; Part I., 1st ed. UICT Mumbai

  32. Perrin DD, Armergo WLF, Perrin DR (1980) Purification of laboratory chemicals2nd edn. Pergamon, New York

    Google Scholar 

  33. Silverstein RM, Bassler GC, Morrill TC (1991) Spectroscopic identification of organic compounds5th edn. Wiley, New York

    Google Scholar 

  34. Aigbodion AI, Okieimen FE, Obazee EO, Bakare IO (2003) Utilisation of maleinized rubber seed oil and its alkyd resin as binders in water-borne coatings. Prog Org Coatings 46:28–31. https://doi.org/10.1016/S0300-9440(02)00181-9

    Article  CAS  Google Scholar 

  35. Rajulu AV, Reddy GR, Chari KN (1998) Chemical resistance and tensile properties of styrenated polyester-coated bamboo fibres. Indian J Fibre Text Res 23:49–51

    CAS  Google Scholar 

Download references

Acknowledgments

The authors acknowledge financial support from both the Science and Technology Development Fund (STDF, EGYPT) (GERF- Call- 3) No.5086 and the German Ministry of Education and Research (BMBF Grant No. IB-070).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Kamal I. Aly.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

ESM 1

(DOCX 106 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Aly, K.I., Sun, J., Kuckling, D. et al. Polyester resins based on soybean oil: synthesis and characterization. J Polym Res 27, 286 (2020). https://doi.org/10.1007/s10965-020-02244-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10965-020-02244-9

Keywords

Navigation