Abstract
The inorganic-organic hybrid coatings based on UV curable urethane acrylate contained two types of polyhedral oligomeric silsesquioxane (POSS) were prepared. The hydroxyl functionalized POSS nanoparticles, pristine POSS, and the one modified by acrylic acid utilized to study the effect of nanoparticle content and its functionality on ultimate mechanical properties of the hybrid coatings. The nanomechanical properties and scratch resistance of nanocomposite coatings were evaluated with nanoindentation and nanoscratch techniques, respectively. Consequently, the results compared with previously obtained DMTA data. The results revealed that by embedding acrylic acid modified POSS, the surface hardness and elastic modulus improved. Further increasing acrylic acid modified POSS content to 5%, the surface elastic modulus and hardness improved to 37% and 35%, respectively, relative to neat coating and also the enhanced scratch resistance was observed. Furthermore, the discrepancy between the surface elastic modulus and bulk elastic modulus was rationalized and the contributed parameters that led to this deviation such as pile-up area, holding time and hydrostatic stress was investigated. The results showed that apart from the inefficiency of Oliver and Pharr method to precisely evaluate the nanomechanical properties of hybrid coatings, the targeted placement of POSS nanoparticle is responsible for this disparity between surface mechanical properties and its bulk values.
Similar content being viewed by others
References
Taguet A, Cassagnau P, Lopez-Cuesta JM (2014) Structuration, selective dispersion and compatibilizing effect of (nano) fillers in polymer blends. Prog Polym Sci 39(8):1526–1563
Lee CH, Chien AT, Yen MH, Lin KF (2008) Poly (methyl acrylate-co-methyl methacrylate)/montmorillonite nanocomposites fabricated by soap-free emulsion polymerization. J Polym Res 15(4):331–336
Lin KJ, Lee SC, Lin KF (2014) One-pot fabrication of poly (vinyl alcohol)/graphene oxide nanocomposite films and their humidity dependence of mechanical properties. J Polym Res 21(12):611
Dokukin ME, Sokolov I (2012) On the measurements of rigidity modulus of soft materials in nanoindentation experiments at small depth. Macromolecules 45(10):4277–4288
Kumar SK, Benicewicz BC, Vaia RA, Winey KI (2017) 50th anniversary perspective: are polymer nanocomposites practical for applications? Macromolecules 50(3):714–731
Kuo SW, Chang FC (2011) POSS related polymer nanocomposites. Prog Polym Sci 36(12):1649–1696
Zhou H, Ye Q, Xu J (2017) Polyhedral oligomeric silsesquioxane-based hybrid materials and their applications. Materials Chemistry Frontiers 1(2):212–230
Zhang W, Camino G, Yang R (2017) Polymer/polyhedral oligomeric silsesquioxane (POSS) nanocomposites: an overview of fire retardance. Prog Polym Sci 67:77–125
Chang YH, Wu MS, Lin KF (2014) Graphting polyimide to MWCNT for enhancing dispersion and properties of MWCNT/polyetherimide nanocomposites. J Polym Res 21(4):419
Rizvi SB, Yang SY, Green M, Keshtgar M, Seifalian AM (2015) Novel POSS–PCU nanocomposite material as a biocompatible coating for quantum dots. Bioconjug Chem 26(12):2384–2396
McMullin E, Rebar HT, Mather PT (2016) Biodegradable thermoplastic elastomers incorporating POSS: synthesis, microstructure, and mechanical properties. Macromolecules 49(10):3769–3779
Yahyaei H, Mohseni M, Ghanbari H, Messori M (2016) Synthesis and characterization of polyhedral oligomeric titanized silsesquioxane: a new biocompatible cage like molecule for biomedical application. Mater Sci Eng C 61:293–300
Leu CM, Chang YT, Wei KH (2003) Polyimide-side-chain tethered polyhedral oligomeric silsesquioxane nanocomposites for low-dielectric film applications. Chem Mater 15(19):3721–3727
Yari H, Mohseni M, Messori M (2015) Toughened acrylic/melamine thermosetting clear coats using POSS molecules: mechanical and morphological studies. Polymer 63:19–29
Zhang W, Müller AH (2013) Architecture, self-assembly and properties of well-defined hybrid polymers based on polyhedral oligomeric silsequioxane (POSS). Prog Polym Sci 38(8):1121–1162
Raftopoulos KN, Koutsoumpis S, Jancia M, Lewicki JP, Kyriakos K, Mason HE, Harley SJ, Hebda E, Papadakis CM, Pielichowski K, Pissis P (2015) Reduced phase separation and slowing of dynamics in polyurethanes with three-dimensional POSS-based cross-linking moieties. Macromolecules 48(5):1429–1441
Misasi JM, Jin Q, Knauer KM, Morgan SE, Wiggins JS (2017) Hybrid POSS-Hyperbranched polymer additives for simultaneous reinforcement and toughness improvements in epoxy networks. Polymer 117:54–63
Chouwatat P, Nojima S, Higaki Y, Kojio K, Hirai T, Kotaki M, Takahara A (2016) An effect of surface segregation of polyhedral oligomeric silsesquioxanes on surface physical properties of acrylic hard coating materials. Polymer 84:81–88
Raftopoulos KN, Pielichowski K (2016) Segmental dynamics in hybrid polymer/POSS nanomaterials. Prog Polym Sci 52:136–187
Gibson RF (2014) A review of recent research on nanoindentation of polymer composites and their constituents. Compos Sci Technol 105:51–65
Koumoulos EP, Jagdale P, Kartsonakis IA, Giorcelli M, Tagliaferro A, Charitidis CA (2015) Carbon nanotube/polymer nanocomposites: a study on mechanical integrity through nanoindentation. Polym Compos 36(8):1432–1446
Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7(6):1564–1583
Norouzi S, Mohseni M, Yahyaei H (2016) Preparation and characterization of an acrylic acid modified polyhedral oligomeric silsesquioxane and investigating its effect in a UV curable coating. Progress in Organic Coatings 99:1–10
Du B, Tsui OK, Zhang Q, He T (2001) Study of elastic modulus and yield strength of polymer thin films using atomic force microscopy. Langmuir 17(11):3286–3291
Ghermezcheshme H, Mohseni M, Yahyaei H (2015) Use of nanoindentaion and nanoscratch experiments to reveal the mechanical behavior of POSS containing polyurethane nanocomposite coatings: the role of functionality. Tribol Int 88:66–75
Joshi M, Butola BS (2007) Isothermal crystallization of HDPE/octamethyl polyhedral oligomeric silsesquioxane nanocomposites: role of POSS as a nanofiller. J Appl Polym Sci 105(2):978–985
Ciprari D, Jacob K, Tannenbaum R (2006) Characterization of polymer nanocomposite interphase and its impact on mechanical properties. Macromolecules 39(19):6565–6573
Hardiman M, Vaughan TJ, McCarthy CT (2016) The effects of pile-up, viscoelasticity and hydrostatic stress on polymer matrix nanoindentation. Polym Test 52:157–166
Rodríguez M, Molina-Aldareguía JM, González C, LLorca J (2012) Determination of the mechanical properties of amorphous materials through instrumented nanoindentation. Acta Mater 60(9):3953–3964
Zhou X, Jiang Z, Wang H, Yu R (2008) Investigation on methods for dealing with pile-up errors in evaluating the mechanical properties of thin metal films at sub-micron scale on hard substrates by nanoindentation technique. Mater Sci Eng A 488(1–2):318–332
Birch F (1938) The effect of pressure upon the elastic parameters of isotropic solids, according to Murnaghan's theory of finite strain. J Appl Phys 9(4):279–288
Kim EH, Myoung SW, Jung YG, Paik U (2009) Polyhedral oligomeric silsesquioxane-reinforced polyurethane acrylate. Progress in Organic Coatings 64(2–3):205–209
Yahyaei H, Mohseni M, Ghanbari H (2015) Physically blended and chemically modified polyurethane hybrid nanocoatings using polyhedral oligomeric silsesquioxane nano building blocks: surface studies and biocompatibility evaluations. J Inorg Organomet Polym Mater 25(6):1305–1312
Mohseni, M., Yahyaei, H., Yari, H., & Ramezanzadeh, B. (2014). Nanotribological characterization of polymeric Nanocoatings: from fundamental to application. In Nanomechanical analysis of high performance materials (pp. 3–27). Springer, Dordrecht
Bhushan B, Israelachvili JN, Landman U (1995) Nanotribology: friction, wear and lubrication at the atomic scale. Nature 374(6523):607–616
Misra R, Fu BX, Morgan SE (2007) Surface energetics, dispersion, and nanotribomechanical behavior of POSS/PP hybrid nanocomposites. J Polym Sci B Polym Phys 45(17):2441–2455
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
ESM 1
(DOCX 2219 kb)
Rights and permissions
About this article
Cite this article
Norouzi, S., Mohseni, M. & Yahyaei, H. The Role of POSS Functionality on Induced Deviation of Nano and Micromechanical Properties of UV Curable Urethane Acrylate Nanocomposite Coatings. J Polym Res 27, 125 (2020). https://doi.org/10.1007/s10965-020-02114-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10965-020-02114-4