Abstract
A solvent-free ionic carbon nanotube (CNT) nanofluid with about 80 wt.% organic content was synthesized by oxidation of CNTs with mixed acid followed by a surface reaction with PEG-substituted tertiary amine. The CNT nanofluid and the pristine CNTs were introduced to polyurethane (PU) by melt-blending. The structures and properties of the nanofluid and the nanocomposites were investigated. The results show that the CNT nanofluid is in a viscous liquid state at room temperature and is stable and soluble in both aqueous and organic solvents. The CNT nanofluid distributes homogenously in the PU matrix. Due to the high content organic chains on the CNT surfaces, the breaking strength and elastic modulus of the nanocomposite decrease slightly but with about 100 % increase of breaking elongation and 50 % increase of toughness. Better dispersion of the nanofluid leads to more improvement of electrical conductivities of the composite. The solvent-free ionic nanofluid will be an excellent nanofiller in the nanocomposites.
Similar content being viewed by others
References
Tate JS, Akinola AT, Kabakov D (2009) J Technol Stud 35(1):25–32
Chattopadhyay DK, Raju KVSN (2007) Prog Polym Sci 32(3):352–418
Njuguna J, Pielichowski K (2003) Adv Eng Mater 5(11):769–778
Liu C, Qin H, Mather PT (2007) J Mater Chem 17(16):1543–1548
Hu JL, Lu J, Zhu Y (2008) Polym Rev 48(2):275–301
Yoo HJ, Jung YC, Sahoo NG, Cho JW (2006) J Macromol Sci B 45(4):441–451
Cho JW, Kim JW, Jung YC, Goo NS (2005) Macromol Rapid Commun 26(5):412–416
Verdejo R, Stampfli R, Alvarez-Lainez M, Mourad S, Rodriguez-Perez MA, Bruhwiler PA et al (2009) Compos Sci Technol 69(10):1564–1569
Xiong J, Zheng Z, Qin X, Li M, Li H, Wang X (2006) Carbon 44(13):2701–2707
Zhao JC, Du FP, Zhou XP, Cui W, Wang XM, Zhu H et al (2011) Composites B 42(8):2111–2116
Gupta TK, Singh BP, Teotia S, Katyal V, Dhakate SR, Mathur RB (2013) J Polym Res 20(6):169
Gupta TK, Singh BP, Dhakate SR, Singh VN, Mathur RB (2013) J Mater Chem A 1(32):9138–9149
Mathur RB, Pande S, Singh BP, Dhami TL (2008) Polym Compos 29(7):717–727
Wu CS, Liao HT (2013) J Polym Res 20(10):253
Hatui G, Das CK (2013) J Polym Res 20(2):77
Fonseca MA, Abreu B, Goncalves FAMM, Ferreira AGM, Moreira RAS, Oliveira MSA (2013) Compos Struct 99:105–111
Zhang Q, Rastogi S, Chen D, Lippits D, Lemstra PJ (2006) Carbon 44(4):778–785
Rodriguez R, Herrera R, Archer LA, Giannelis EP (2008) Adv Mater 20(22):4353–4358
Li Q, Dong L, Fang J, Xiong C (2010) ACS Nano 4(10):5797–5806
Jespersen ML, Mirau PA, Meerwall EV, Vaia RA, Rodriguez R, Giannelis EP (2010) ACS Nano 4(7):3735–3742
Zhang Y, Gu S, Yan B, Ren J (2012) J Mater Chem 22(30):14843–14846
Gu S, Zhang Y, Yan B (2013) Mater Lett 97:169–172
Lan L, Zheng YP, Zhang AB, Zhang JX (2012) J Nanopart Res 14(3):753–763
Bourlinos AB, Georgakilas V, Tzitzios V, Boukos N, Herrera R, Giannelis EP (2006) Small 2(10):1188–1191
Lei Y, Xiong C, Guo H, Yao J, Dong L, Su X (2008) J Am Chem Soc 130(11):3256–3257
Gofman I, Zhang B, Zang W, Zhang Y, Song G, Chen C, Li Y (2013) J Polym Res 20(10):258
Zheng Y, Zhang J, Lan L, Yu P, Rodriguez R, Herrera R et al (2010) Chem Phys Chem 11(1):61–64
Pattanayak A, Jana SC (2005) Polymer 46(10):3394–3406
Ferreira T, Paiva MC, Pontes AJ (2013) J Polym Res 20(11):301
Mallakpour S, Zadehnazari A (2013) J Polym Res 20(7):192
Lee HF, Yu HH (2011) Soft Matter 7(8):3801–3807
Xiong J, Zheng Z, Song W, Zhou D, Wang X (2008) Compos A 39(5):904–910
He Z, Satarkar N, Xie T, Cheng YT, Hilt JZ (2011) Adv Mater 23(28):3192–3196
Bae CY, Park JH, Kim EY, Kang YS, Kim BK (2011) J Mater Chem 21(30):11288–11295
Cayla A, Campagne C, Rochery M, Devaux E (2011) Synth Met 161(11–12):1034–1042
Abbasi S, Carreau PJ, Derdouri A (2010) Polymer 51(4):922–935
Al-Shabanat M (2012) J Polym Res 19(2):9795
Acknowledgments
The work was supported by National R&D program (Grant No. 2012BAI17B05).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gu, SY., Liu, LL. & Yan, Bb. Effects of ionic solvent-free carbon nanotube nanofluid on the properties of polyurethane thermoplastic elastomer. J Polym Res 21, 356 (2014). https://doi.org/10.1007/s10965-014-0356-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10965-014-0356-0