Abstract
The hydroxide conductivity poly(aryl ether sulfone) with hexaalkyl guanidinium groups side chain(PES-G-Cl) was electrospun to bead-free nanofibers. The polymer concentration and environmental temperature are important parameters that influence the quality of electrospun fibers. We have synthesized the novel composite membranes composed of PES-G-Cl nanofibers and (vinylbenzyl) trimethylammonium chloride(VBTC) ionomers. As a result, the membrane stability, such as dimensions and thermal stabilities of the composite membrane was greatly improved and water uptake of the composite membrane also decreased when compared to that determined in the membrane without nanofibers. In addition, the hydroxide ion conductivity of the composite membrane indicated a significantly higher value when compared to that determined in the membrane with the conventional solvent-casting method. Consequently, nanofibers proved to be promising materials as a composite anion exchange membrane containing nanofibers may have potential application in fuel cells.
Similar content being viewed by others
References
Costamagna P, Srinivasan S (2001) Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000: Part II. Engineering, technology development and application aspects. J Power Sources 102(1–2):253–269
Cropper MAJ, Geiger S, Jollie DM (2004) Fuel cells: a survey of current developments. J Power Sources 131(1–2):57–61
Wang G, Weng Y, Chu D, Xie D, Chen R (2009) Preparation of alkaline anion exchange membranes based on functional poly(ether-imide) polymers for potential fuel cell applications. J Membr Sci 326(1):4–8
Qiao J, Fu J, Lin R et al (2010) Alkaline solid polymer electrolyte membranes based on structurally modified PVA/PVP with improved alkali stability. Polymer 51(21):4850–4859
Shabani I, Sadrabadi MMH, Asl VH et al (2011) Nanofiber-based polyelectrolytes as novel membranes for fuel cell applications. J Membr Sci 368(1–2):233–240
Yao Y, Guo B, Ji L et al (2011) Highly proton conductive electrolyte membranes: fiber-induced long-range ionic channels. Electrochem Commun 13(9):1005–1008
Tamura T, Kawakami H (2010) Aligned electrospun nanofiber composite membranes for fuel cell electrolytes. Nano Lett 10(4):1324–1328
Choi J, Lee KM, Wycisk R, Pintauro PN (2008) Nanofiber network ion-exchange membranes. Macromolecules 41(13):4569–4572
Ballengee JB, Pintauro PN (2011) Composite fuel cell membranes from dual-nanofiber electrospun mats. Macromolecules 44(18):7307–7314
Roddecha S, Dong Z, Wu Y et al (2012) Mechanical properties and ionic conductivity of electrospun quaternary ammonium ionomers. J Membr Sci 389(1):478–485
Zhang Q, Li S, Zhang S (2010) A novel guanidinium grafted poly(aryl ether sulfone) for high-performance hydroxide exchange membranes. Chem Commun 46(40):7495–7497
Barragán VM, Ruiz-Bauzá C, Villaluenga JPG et al (2004) Transport of methanol and water through Nafion membranes. J Power Sources 130(1–2):22–29
Laforgue A, Robitaille L, Mokrini A et al (2007) Fabrication and characterization of ionic conducting nanofibers. Macromol Mater Eng 292(12):1229–1234
Acknowledgments
We thank the National Basic Research Program of China (No.2012CB932802), the National Science Foundation of China (No.51021003 and 51133008), and the National High Technology Research and Development Program of China (No. 2012AA03A601) for financial support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, L., Dou, L. & Zhang, S. Nanofiber-based poly(aryl ether sulfone) containing guanidinium groups as novel anion-exchange membranes. J Polym Res 20, 232 (2013). https://doi.org/10.1007/s10965-013-0232-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10965-013-0232-3