Abstract
Blends of polystyrene/polyamide 6 (PS/PA6) compatibilized by styrene-ethylene/butylene-styrene (SEBS) elastomer grafted with maleic anhydride were prepared by melt blending. Wide-angle X-ray diffraction (WAXD) scans indicated a skin–core structure formed in the specimens during the injection-molding process. The results showed that the specimens tended to form the α-crystalline form in the core region, but the γ-crystalline form in the skin region. The influences of PS and SEBS-g-MA on the crystallization of PA6 were different in the core region and skin region. In the core region, PS made the PA6 tend to be in the γ-crystalline form, but the influence of PS was contrary in the skin region. SEBS-g-MA had both enhancement and toughening effects on the blends. The mechanical properties of the blends were determined by the combined action of the two aforementioned factors.
Similar content being viewed by others
Reference
Nandan B, Kandpal LD, Mathur GN (2003) J Appl Polym Sci 90:2887–2905
Ohishi H, Ikehara T, Nishi T (2001) J Appl Polym Sci 80:2347–2360
Arns CH, Knackstedt MA, Roberts AP, Pinczewski VW (1999) Macromolecules 32:5964–5966
Meincke O, Kaempfer D, Weickmann H, Friedrich C, Vathauer M, Warth H (2004) Polymer 45:739–748
Pernot H, Baumert M, Court F, Leibler L (2002) Nat Mater 1:54–58
Curto D, Valenza A, La-Mantia FP (1990) J Appl Polym Sci 39:865–873
Yasue K, Marutani T, Fukushima Y, Ida T (1991) US Patent 5,043,385
Mussig B, Meyer RV, Brassat B, Dhein R (1989) US Patent 4,820,771
Khanna YP, Turi EA, Aharoni SM, Largman T (1983) US Patent 4,417,032
Biletch HA, Cooper E (1991) US Patent 5,032,644
Zhou QY, Zhang BH, Song MD, He BL (1996) Eur Polym J 32:1145–1150
Choi J-H, Kim H-G, Han D-H, Lim J-C, Oh D-H, Min K-E (2006). J Appl Polym Sci 101:1–7
Jannasch P, Wesslén B (1998) J Appl Polym Sci 70:1887–1891
Cho K, Jeon HK, Park CE, Kim J, Kim KU (1996) Polymer 37(7):1117–1122
Villarreal ME, Tapia M, Nuňo-Donlucas SM, Puig JE, González-Núňez R (2004) J Appl Polym Sci 92:2545–2551
Kong J, Fan XD, Qiao WQ, Xie YC, Si QF, Tang YS (2005) Polymer 46(18):7644–7651
El-Bakary MA, Ali AM (2008) Opt Lasers Eng 46(10):726–732
Zhou GH, Liu YQ, He LL, Guo QG, Ye HQ (2011) Carbon 49(9):2883–2892
Zheng L, Wang YZ, Yang KK, Wang XL, Chen SC, Li J (2005) Eur Polym J 41:1243–1250
Fornes TD, Yoon PJ, Keskkula H, Paul DR (2001) Polymer 42:9929–9940
Fornes TD, Yoon PJ, Keskkula H, Paul DR (2002) Polymer 43:2121–2122
Wu TM, Liao CS (2000) Macromol Chem Phys 201:2820–2825
Samon JM, Schultz JM, Wu J, Hsiao B, Yeh F, Kolb R (1999) J Polymer Sci B Polym Phys 37:1277–1287
Schultz JM, Hsiao BS, Samon JM (2000) Polymer 41:8887–8895
Ramesh C, Bhoje GE (2001) Macromolecules 34(10):3308–3313
Lincoln DM, Vaia RA (2004) Macromolecules 37(12):4554–4561
Ito M, Mizuochi K, Kanamoto T (1998) Polymer 39(19):4593–4598
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Guo, T., Ding, X., Han, H. et al. Wide-angle X-ray diffraction investigation on crystallization behavior of PA6/PS/SEBS-g-MA blends. J Polym Res 19, 9813 (2012). https://doi.org/10.1007/s10965-011-9813-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10965-011-9813-1