Abstract
In this work, low density polyethylene and its blend with poly (ethylene vinyl acetate) (LDPE/EVA) (80/20) were mixed with different concentration of Azodicarbonamide (ACA) as a foaming agent. The specimens were crosslinked by electron beam irradiation in presence of 1,6-Hexandiol diacrylate (HDDA). The foam structure was obtained by heating the crosslinked sheets at 225 °C. The effect of ACA content and irradiation dose on the gel percent, tensile strength, cell density, and thermal stabilities was investigated. The results showed clearly that the increasing of ACA content reduces the stress and strain at break and increase the gel content. On the other hand, the foaming degree increases with increasing the ACA content and decreases with increasing irradiation dose.
Similar content being viewed by others
References
Weaire D (2002) Adv Eng Mater 4:723
Qingxiu L, Laurent MM (2003) J Appl Polym Sci 88:3139
Klempner D, Frisch KC (1991) In: Klempner D, Frisch KC (Eds) Handbook of polymeric foams and foam technology. Hanser, Munich
Kosin JA, Tice CL (1990) J Cell Plast 26:322
Ghazali Z, Johnson AF, Dahlan KZ (1999) Radiat Phys Chem 55:73
Tambdi SM, Mhaske ST, Kale DD (2004) J Appl Polym Sci 91:110
Rachtanapun P, Selke SM, Matuana LM (2004) J Appl Polym Sci 93:364
Zhang Y, Rodrique D, Ait-Kadi A (2003) J Appl Polym Sci 90:2111
Dadbin S, Frrounchi M, Haji-saeid M, Gangi F (2002) J Appl Polym Sci 86:1959
Ruiz JL, Rodríguez-Pérez MA, De Saja JA (2005) Polymer 46:3105
Rodríguez-Pérez MA, Duijsens A, De Saja JA (1998) J App Polym Sci 68:1237
ASTM D-638 (1988) Annual book of ASTM standards, vol.08.01. American Society for Testing Materials, Philadelphia, USA
ASTM D2765-84 (1988) (Method A), Annual book of ASTM standards, vol. 08.02. American Society for Testing Materials, Philadelphia, USA.
ASTM D 3575 (1988) (Method B), Annual book of ASTM standards, vol. 08.03. American Society for Testing Materials, Philadelphia, USA
Huang Q, Klötzer R, Seibig B, Paul D (1998) J Appl Polym Sci 69:1753
Matuana LM, Park CB, Balatinecz JT (1997) Polym Eng Sci 37:1137
Sagane N, Harayama H (1981) Radiat Phys Chem 18:99
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Youssef, H.A., Senna, M.M. & Eyssa, H.M. Characterization of LDPE and LDPE/EVA blends crosslinked by electron beam irradiation and foamed with chemical foaming agent. J Polym Res 14, 351–357 (2007). https://doi.org/10.1007/s10965-007-9117-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10965-007-9117-7