Abstract
Sago starch (SS) was melt-blended with polypropylene (PP) with the concentration of SS in the blends varied between 10% and 50% by weight. Characterization of the PP/SS blends was carried out to gain some information on the miscibility between PP and SS and to gain insight into how well these materials behave thermodynamically with regard to the variation of the storage modulus (E′) and the loss tangent (tanδ) with temperature. The E′ and tanδ remained unchanged for SS between 10% to 33% but increased as SS reached 50%. The blend containing 50%SS was superior compared to the other blends in the dynamic mechanical thermal analysis (DMTA). Through the use of a Differential Scanning Calorimeter (DSC), the melting endotherm of the miscible blends was found to increase constantly with the increasing SS content. The tensile properties of the blends decreased with SS content. Examination of the blends with a Scanning Electron Microscope (SEM) showed that the SS granules were well dispersed in the PP matrix.
Similar content being viewed by others
References
S. V. D Ven, Polypropylene and Other Polyolefins, Elsevier, Amsterdam, 1990.
S. Kalpakjian, Manufacturing Engineering and Technology, 3rd Edition, Addison-Wesley, New York, 1995.
M. F. Astarita, A. Cecere, R. Greco and G. Orsello, Polymer, 34, 5073 (1993).
R. L. Whistler, J. N. BeMiller and E. F. Paschall, Starch Chemistry and Technology, 2nd Edition, Academic Press, New York, 1984.
M. Bhattacharya, U. R. Vaidya, D. Zhang and R. Narayan, J. Apply. Polym. Sci., 57, 539 (1995).
U. R. Vaidya and M. Bhattacharya, J. Appl. Polym. Sci., 52, 617 (1994).
D. R. Coffin and M. L. Fishman, J. Appl. Polym. Sci., 54, 1311 (1994).
M. William and D. F. H. Otey, Chemicals from Starch, 2nd Edition, Academic Press, New York, 1984.
M. F. Koenig and S. J. Huang, Polymer, 36, 1877 (1995).
J. D. Ferry, Viscoelastic Properties of Polymers, Wiley, New York, p. 30–31, 1961.
H. Levine and L. Slade, Dough Rheology and Baked Product Texture, H. M. Faridi and J. M. Faubion Eds., Van Nostrand Reinhold, New York, p. 157–330, 1989.
S. Simmons and L. E. Thomas, J. Appl. Polym. Sci., 58, 2259 (1995).
J. Longton and G. A. LeGrys, Starch/Starke, 33, 410 (1981).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hamdan, S., Hashim, D.M.A., Ahmad, M. et al. Compatibility studies of polypropylene (PP)-sago starch (SS) blends using DMTA. J Polym Res 7, 237–244 (2000). https://doi.org/10.1007/s10965-006-0125-9
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10965-006-0125-9