Abstract
A simple numerical approach that is based on the lubrication approximation is developed for the optimal design of a linearly tapered coat-hanger die. This approach does not require the analytic pressure drop / flow rate equations for flow in the manifold and in the slot section, therefore any generalized Newtonian fluid model can be easily incorporated. Example calculations have demonstrated that the predictions based on this approach are reasonably accurate as compared with those from the complete 3-D finite element simulations.
Similar content being viewed by others
References
Y. Matsubara, Polym. Eng. Sci., 23, 17 (1983).
T. J. Liu, L. D. Liu and J. D. Tsou, Polym. Eng. Sci., 34, 541 (1994).
F. Durst, U. Lange and H. Raszillier, Chem. Eng. Sci., 49, 161 (1994).
L. Sartor, PhD Thesis, Univ. of Minnesota, Minneapolis, 1990.
E. P. Vrahopoulou, Chem. Eng. Sci., 47, 1027 (1992).
S. H. Wen and T. J. Liu, Polym. Eng. Sci., 35, 759 (1995).
Y. Wang, Polym. Eng. Sci., 31, 204 (1991).
S. H. Wen, T. J. Liu and J. D. Tsou, Polym. Eng. Sci., 34, 1827 (1994).
P. Y. Wu, L. M. Huang and T. J. Liu, Polym. Eng. Sci., 35, 1713 (1995).
T. J. Liu, paper presented at the first Asian Coating Symposium, Sept. 7–9, Fukuoka, Japan, 1997.
Y. W. Yu, P. Y. Wu and T. J. Liu, AIChE J., 43, 3117 (1997).
E. P. Vrahopoulou, Chem. Eng. Sci., 46, 629 (1991).
T. J. Liu, C. N. Hong and K. C. Chen, Polym. Eng. Sci., 28, 1517 (1988).
K. Y. Lee and T. J. Liu, Polym. Eng. Sci., 29, 1066 (1989).
S. L. Yuan, Polym. Eng. Sci., 35, 577 (1995).
S. J. Weinstein and K. J. Ruschak, AIChE J., 42(a), 1501 (1996).
S. J. Weinstein and K. J. Ruschak, AIChE J., 42(b), 2401 (1996).
T. J. Liu, Ind. Eng. Chem. Fund., 22, 183 (1983).
G. Dhatt and G. Touaot, The Finite Element Method Displayed, John Wiley, New York, 1984.
R. B. Bird, R. C. Armstrong and O. Hassager, Dynamic of Polymeric Liquids, Vol. 1, John Wiley, New York, 1987.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yu, YW., Liu, TJ. A simple numerical approach for the optimal design of an extrusion die. J Polym Res 5, 1–7 (1998). https://doi.org/10.1007/s10965-006-0033-z
Issue Date:
DOI: https://doi.org/10.1007/s10965-006-0033-z