Journal of Solution Chemistry

, Volume 47, Issue 3, pp 449–467 | Cite as

Viscosities and Surface Tensions of Phenetole with N-Methyl-2-pyrrolidone, N,N-Dimethylformamide and Tetrahydrofuran Binary Systems at Three Temperatures

  • Mohammad S. Al Tuwaim
  • Adel S. Al-Jimaz
  • Khaled H. A. E. Alkhaldi
Article

Abstract

Viscosities, η, and surface tensions, σ, of binary systems of phenetole (ethoxy benzene or ethyl phenyl ether) with N-methyl-2-pyrrolidone, N,N-dimethylformamide or with tetrahydrofuran were measured over the entire mole fraction range and at (298, 303 and 308) K. The experimental data was used to compute the deviations in viscosity, Δη, and surface tension, Δσ. Values of the excess Gibbs energy of activation G*E, surface entropy S σ and surface enthalpy H σ were calculated. Viscosity data of the binary systems were calculated using the Grunberg and Nissan and the three-body and four-body McAllister correlations. The Redlich–Kister method was used for evaluation of coefficients and standard deviations for Δη, Δσ and G*E. The results were interpreted in terms of the probable effect of molecular interactions between components as well as polarity.

Keywords

Viscosity Surface tension Phenetole Polar solvent 

References

  1. 1.
    Poling, B.E., Prausnitz, J.M., O’Connell, J.P.: The Properties of Gases and Liquids, 5th edn. McGraw-Hill, New York (2001)Google Scholar
  2. 2.
    Roland, C.M., Bair, S., Casalini, R.: Thermodynamic scaling of the viscosity of van der Waals, H-bonded, and ionic liquids. J. Chem. Phys. 125, 1–8 (2006)CrossRefGoogle Scholar
  3. 3.
    Singh, S.K., Sinha, A., Deo, G., Singh, J.K.: Vapor–liquid phase coexistence, critical properties, and surface tension of confined alkanes. J. Phys. Chem. C 113, 7170–7180 (2009)CrossRefGoogle Scholar
  4. 4.
    Neyt, J., Wender, A., Lachet, V., Malfreyt, P.: Prediction of the temperature dependence of the surface tension of SO2, N2, O2, and Ar by Monte Carlo molecular simulations. J. Phys. Chem. B 115, 9421–9430 (2011)CrossRefGoogle Scholar
  5. 5.
    Biscay, F., Ghoufi, A., Lachet, V., Malfreyt, P.: Prediction of the surface tension of the liquid–vapor interface of alcohols from Monte Carlo simulations. J. Phys. Chem. 115, 8670–8683 (2011)Google Scholar
  6. 6.
    Nain, A.K.: Densities, ultrasonic speeds, viscosities and excess properties of binary mixtures of methyl methacrylate with N,N-dimethylformamide and N,N-dimethylacetamide at different temperatures. J. Chem. Thermodyn. 60, 105–116 (2013)CrossRefGoogle Scholar
  7. 7.
    Kumar, D.B.K., Reddy, K.R., Rao, G.S., Sandhyasri, P.B., Begum, Z., Rambabu, C.: Measurements of some physical properties of binary liquid mixtures (N-methyl-2-pyrrolidone + an aliphatic ester) at several temperatures and data processing of viscosity and ultrasonic speed. J. Mol. Liq. 183, 31–44 (2013)CrossRefGoogle Scholar
  8. 8.
    Bao, Z., Zhang, W., Chen, Y., Xu, J., Cui, X.: Densities, viscosities and volumetric properties of BF3 anisole and BF3 phenetole complexes at = (283.15 to 303.15) K. J. Mol. Liq. 198, 187–192 (2014)CrossRefGoogle Scholar
  9. 9.
    Al-Jimaz, A.S., Al-Kandary, J.A., Abdul-Latif, A.M.: Densities and viscosities for binary mixtures of phenetole with 1-pentanol, 1-hexanol, 1-heptanol, 1-octanol, 1-nonanol, and 1-decanol at different temperatures. Fluid Phase Equilib. 218, 247–260 (2004)CrossRefGoogle Scholar
  10. 10.
    Francesconi, R., Comelli, F., Castellari, C.: Excess molar enthalpies of binary mixtures containing phenetole + α-pinene or β-pinene in the range (288.15–313.15) K, and at atmospheric pressure: application of the extended cell model of Prigogine. Thermochem. Acta 363, 115–120 (2000)CrossRefGoogle Scholar
  11. 11.
    Ottani, S., Comelli, F., Castellari, C.: Densities, viscosities, and excess molar enthalpies of propylene carbonate + anisole or + phenetole at (293.15, 303.15, and 313.15) K. J. Chem. Eng. Data 46, 125–129 (2001)CrossRefGoogle Scholar
  12. 12.
    Francesconi, Romolo, Comelli, Fabio: Carlo Castellari: excess molar enthalpies and excess molar volumes of binary mixtures containing dialkyl carbonates + anisole or phenetole at (288.15 and 313.15) K. J. Chem. Eng. Data 45, 544–548 (2000)CrossRefGoogle Scholar
  13. 13.
    Al Tuwaim, M.S., Alkhaldi, K.H.A.E., Al-Jimaz, A.S., Mohammad, A.A.: Comparative study of physico-chemical properties of binary mixtures of N,N-dimethylformamide with 1-alkanols at different temperatures. J. Chem. Thermodyn. 48, 39–47 (2012)CrossRefGoogle Scholar
  14. 14.
    Al-Jimaz, A.S., Al-Kandary, J.A., Abdul-Latif, A.M.: Acoustical and excess properties of chlorobenzene + 1-hexanol, or 1-heptanol, or 1-octanol, or 1-nonanol, or 1-decanol at (298.15, 303.15, 308.15, and 313.15) K. J. Chem. Eng. Data 52, 206–214 (2007)CrossRefGoogle Scholar
  15. 15.
    Al-Kandary, J.A., Al-Jimaz, A.S., Abdul-Latif, A.M.: Densities, viscosities, speeds of sound and refractive indices of binary mixtures of tetrahydrofuran with 1-hexanol, 1-heptanol, 1-octanol, 1-nonanol and 1-decanol at 298.15, 303.15, 308.15 and 313.15 K. J Phys. Chem. Liq. 47, 210–224 (2009)CrossRefGoogle Scholar
  16. 16.
    Redlich, O., Kister, A.T.: Algebraic representation of thermodynamic properties and the classification of solutions. Ind. Eng. Chem. 40, 345–348 (1948)CrossRefGoogle Scholar
  17. 17.
    Grunberg, L., Nissan, A.H.: Mixture law for viscosity. Nature 164, 799–800 (1949)CrossRefGoogle Scholar
  18. 18.
    Mac Allister, R.A.: The viscosity of liquid mixtures. AIChE J. 6, 427–431 (1960)CrossRefGoogle Scholar
  19. 19.
    George, J., Sastry, N.V.: Densities, viscosities, speeds of sound, and relative permittivities for water + cyclic amides (2-pyrrolidinone, 1-methyl-2-pyrrolidinone, and 1-vinyl-2-pyrrolidinone) at different temperatures. J. Chem. Eng. Data 49, 235–242 (2004)CrossRefGoogle Scholar
  20. 20.
    López, A.B., García-Abuín, A., Gómez-Díaz, D., Dolores La Rubia, M., Navaza, J.M.: Density, speed of sound, viscosity, refractive index and surface tension of N-methyl-2-pyrrolidone + diethanolamine (or triethanolamine) from T = (293.15 to 323.15) K. J. Chem. Thermodyn. 61, 1–6 (2013)CrossRefGoogle Scholar
  21. 21.
    Mohammad, A.A., Alkhaldi, K.H.A.E., Al Tuwaim, M.S., Al-Jimaz, A.S.: Viscosity and surface tension of binary systems of N,N-dimethylformamide with alkan-1-ols at different temperatures. J. Chem. Thermodyn. 56, 106–113 (2013)CrossRefGoogle Scholar
  22. 22.
    Aminabhavi, V.A., Aminabhavi, T.M., Balundgi, R.H.: Evaluation of excess parameters from densities and viscosities of binary mixtures of ethanol with anisole, N,N-dimethylformamide, carbon tetrachloride and acetophenone from 298.15 to 313.15 K. Ind. Eng. Chem. Res. 29, 2106–2111 (1990)CrossRefGoogle Scholar
  23. 23.
    Shan, Z., Asfour, A.A.: Viscosities and densities of nine binary 1-alkanol systems at 293.15 K and 298.15 K. J. Chem. Eng. Data 44, 118–123 (1999)CrossRefGoogle Scholar
  24. 24.
    Mohsen-Nia, M., Alimohammady, F.: Densities and viscosities of binary mixtures of poly(vinyl chloride) and tetrahydrofuran at temperatures (283.15–303.15) K. J. Chem. Eng. Data 54, 1375–1377 (2009)CrossRefGoogle Scholar
  25. 25.
    Riddick, J.A., Bunger, W.B., Sakano, T.: Organic Solvents: Physical Properties and Methods of Purification, vol. 2. Wiley, New York (1986)Google Scholar
  26. 26.
    Fattahi, M., Iloukhani, H.: Excess molar volume, viscosity, and refractive index study for the ternary mixture 2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3) at different temperatures. Application of the ERAS-model and Peng–Robinson–Stryjek–Vera equation of state. J. Chem. Thermodyn. 42, 1335–1345 (2010)CrossRefGoogle Scholar
  27. 27.
    Rathnam, M.V., Ambavadekar, D.R., Nandini, M.: Volumetric, viscosity and ultrasonic behaviour of n-butyl propionate + ether (THF, 1,4-dioxane, anisole and butyl vinyl ether) mixtures at 303.15, 308.15 and 313.15 K. Eur. Chem. Bull. 2, 642–650 (2013)Google Scholar
  28. 28.
    Douhéret, G., Davis, M.I., Reis, J.C.R.: Excess isentropic compressibilities and excess ultrasound speeds in binary and ternary liquid mixtures. Fluid Phase Equilib. 231, 246–249 (2005)CrossRefGoogle Scholar
  29. 29.
    Zhu, A., Wang, J., Liu, R.: A volumetric and viscosity study for the binary mixtures of 1-hexyl-3-methylimidazolium tetrafluoroborate with some molecular solvents. J. Chem. Thermodyn. 43, 796–799 (2011)CrossRefGoogle Scholar
  30. 30.
    Gascon, I., Lafuente, C., Cea, P., Royo, F.M., Urieta, J.S.: Viscosities of the ternary mixture (cyclohexane + tetrahydrofuran + chlorocyclohexane) at 298.15 and 313.15 K. Fluid Phase Equilib. 164, 143–155 (1999)CrossRefGoogle Scholar
  31. 31.
    Changsheng, Y., Xu, W., Ma, P.: Thermodynamic properties of binary mixtures of p-xylene with cyclohexane, heptane, octane, and N-methyl-2-pyrrolidone at several temperatures. J. Chem. Eng. Data 49, 1794–1801 (2004)CrossRefGoogle Scholar
  32. 32.
    Parveen, S., Shukla, D., Singh, S., Singh, K.P., Gupta, M., Shukla, J.P.: Ultrasonic velocity, density, viscosity and their excess parameters of the binary mixtures of tetrahydrofuran with methanol and o-cresol at varying temperatures. Appl. Acoust. 70, 507–513 (2009)CrossRefGoogle Scholar
  33. 33.
    Chanda, R., Banerjee, A., Roy, M.N.: Studies of viscous antagonism, excess molar volumes, viscosity deviation and isentropic compressibility of ternary mixtures containing N,N-dimethyl formamide, benzene and some ethers at 298.15 K. J. Serb. Chem. Soc. 75, 1721–1732 (2010)CrossRefGoogle Scholar
  34. 34.
    Johnson, I., Kalidoss, M., Srinivasamoorthy, R.: Density, viscosity, and speed of sound in the ternary mixtures of 2-ethoxyethanol + N,N-dimethylformamide + N,N-dimethylacetamide and 2-ethoxyethanol + dimethyl sulfoxide + N,N-dimethylacetamide at 308.15 K. J. Chem. Eng. Data 47, 1388–1390 (2002)CrossRefGoogle Scholar
  35. 35.
    Kinart, C.M., Kinart, W.J., Cwiklinska, A.: 2-Methoxyethanol tetrahydrofuran–binary liquid system. Viscosities, densities, excess molar volumes and excess Gibbs activation energies of viscous flow at various temperatures. J. Therm. Anal. Cal. 68, 307–317 (2002)CrossRefGoogle Scholar
  36. 36.
    Piñeiro, Á., Brocos, P., Amigo, A., Pintos, M., Bravo, R.: Surface tensions and refractive indices of (tetrahydrofuran + n-alkanes) at T = 298.15 K. J. Chem. Thermodyn. 31, 931–942 (1999)CrossRefGoogle Scholar
  37. 37.
    Thermodynamic Tables of Non-hydrocarbons: Thermodynamic Research Center. Texas A & M University, College Station (1994)Google Scholar
  38. 38.
    Pal, A., Bhardwaj, R.K.: Excess molar volumes and viscosities for binary mixtures of 2-propoxyethanol and of 2-Isopropoxyethanol with 2-pyrrolidinone, N-methyl-2-pyrrolidinone, N,N-dimethylformamide, and N,N-dimethylacetamide at 298.15 K. J. Chem. Eng. Data 47, 1128–1134 (2002)CrossRefGoogle Scholar
  39. 39.
    Henni, A., Hromek, J.J., Tonitwachwuthikul, P., Chakma, A.: Volumetric properties and viscosities for aqueous N-methyl-2-pyrrolidone solutions from 25 °C to 70 °C. J. Chem. Eng. Data 49, 231–234 (2004)CrossRefGoogle Scholar
  40. 40.
    Sanjeevan, J.K., Pandharinath, S.: Density and viscosity studies of binary mixtures of aniline + benzene and ternary mixtures of (aniline + benzene + N,N-dimethylformamide) at 298.15, 303.15, 308.15, and 313.15 K. J. Mol. Liq. 132–132, 81–86 (2007)Google Scholar
  41. 41.
    Joshi, S.S., Aminabhavi, T.M., Balundgi, R.H., Shukla, S.S.: Densities and viscosities of binary liquid mixtures of nitrobenzene with cyclohexane and N,N-dimethylformamide. J. Chem. Eng. Data 35, 185–187 (1990)CrossRefGoogle Scholar
  42. 42.
    Aminabhavi, T.M., Aralaguppi, M.I., Bindu, G., Khinnavar, R.S.: Densities, shear viscosities, refractive indices, and speeds of sound of bis(2-methoxyethyl) ether with hexane, heptane, octane, and 2,2,4-trimethylpentane in the temperature interval 298.15–318.15 K. J. Chem. Eng. Data 39, 522–528 (1994)CrossRefGoogle Scholar
  43. 43.
    Jiménez, E., Casas, H., Segade, L., Franjo, C.: Surface tensions, refractive indexes and excess molar volumes of hexane + 1-alkanol mixtures at 298.15 K. J. Chem. Eng. Data 45, 862–866 (2000)CrossRefGoogle Scholar
  44. 44.
    García, B., Alcalde, R., Leal, J.M., Matos, J.S.: Formamide–(C1–C5) alkan-1-ols solvent systems. J. Chem. Soc. Faraday Trans. I 92, 3347–3352 (1996)CrossRefGoogle Scholar
  45. 45.
    Alkhaldi, K.H.A.E., Al-Jimaz, A.S., Al Tuwaim, M.S.: Densities, ultrasonic speeds and refractive indices of phenetole with N-methyl-2-pyrrolidone, N,N-dimethylformamide and tetrahydrofuran binary mixtures at different temperatures. J. Chem. Thermodyn. 103, 249–256 (2016)CrossRefGoogle Scholar
  46. 46.
    Bevington, P.: Data Reduction and Error Analysis for the Physical Sciences. McGraw-Hill, New York (1969)Google Scholar
  47. 47.
    Kumar, A.: Surface tension, viscosity, vapor pressure, density, and sound velocity for a system miscible continuously from a pure fused electrolyte to a nonaqueous liquid with a low dielectric constant: anisole with tetra-n-butylammonium picrate. J. Am. Chem. Soc. 115, 9243–9248 (1993)CrossRefGoogle Scholar
  48. 48.
    Yang, Y., Deng, J., Yang, H., Zheng, X., Che, G., Huang, Z.: Densities, surface tensions, and derived surface thermodynamics properties of (trimethylbenzene + propyl acetate, or butyl acetate) from T = 298.15 to 313.15 K. J. Chem. Thermodyn. 39, 438–448 (2007)CrossRefGoogle Scholar
  49. 49.
    Tsierkezos, N.G., Filippou, A.C.: Thermodynamic investigation of N,N-dimethylformamide/toluene binary mixtures in the temperature range from 278.15 to 293.15 K. J. Chem. Thermodyn. 38, 952–961 (2006)CrossRefGoogle Scholar
  50. 50.
    Meyer, R., Meyer, M., Metzger, J., Peneloux, A.: Thermodynamics and physicochemical properties of binary solvent. J. Chem. Phys. 62, 406–412 (1971)Google Scholar
  51. 51.
    Oswal, S., Rathnam, M.V.: Viscosity data of binary mixtures: ethyl acetate + cyclohexane, + benzene, + toluene, + ethylbenzene + carbon tetrachloride, and + chloroform at 303.15 K. Can. J. Chem. 62, 2851–2854 (1984)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • Mohammad S. Al Tuwaim
    • 1
  • Adel S. Al-Jimaz
    • 1
  • Khaled H. A. E. Alkhaldi
    • 1
  1. 1.Department of Chemical Engineering, College of Technological StudiesPAAETKuwaitKuwait

Personalised recommendations