Skip to main content
Log in

Research of Foam Performance of 3-Dodecyloxy-2-hydroxypropyl Trimethylammonium Bromide and Its Complex Systems

  • Original Paper
  • Published:
Journal of Solution Chemistry Aims and scope Submit manuscript

Abstract

Foam performance of 3-dodecyloxy-2-hydroxypropyl trimethylammonium bromide (DOHTAB) has been determined in the presence of different relative amounts of polymer and sodium bromide. The experimental results show that the foaming ability of the mixed systems of DOHTAB/polymer and DOHTAB/sodium bromide is stronger than that of the surfactant solutions in the absence of polymer and sodium bromide. Both foaming efficiency and foam stability of the surfactant solutions are evidently enhanced with increasing relative amounts of polymer and sodium bromide. The foamability of the mixture of DOHTAB/NaBr is stronger than that of the mixed system of DOHTAB/PEG or DOHTAB/PVP when the percentage composition is the same, whereas the foam stability of the former is weaker than that of the latter. The foamability and foam stability of the DOHTAB/PEG system were both better than those of the mixed system of DOHTAB/PVP at the same concentration.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

References

  1. Rossen, S., Dotchi, E.: DLVO and non-DLVO surface forces in foam films from amphiphilic block copolymers. Adv. Colloid Interface Sci. 83, 111–136 (1999)

    Article  Google Scholar 

  2. Drummonda, C.J., Wells, D.: Nonionic lactose and lactitol based surfactants: comparison of some physico-chemical properties. Colloids Surf. A Physicochem. Eng. Aspects 141, 131–142 (1998)

    Article  Google Scholar 

  3. Khristov, K., Exerowa, D., Minkov, G.: Critical capillary pressure for destruction of single foam films and foam: effect of foam film size. Colloids Surf. A Physicochem. Eng. Aspects 210, 159–166 (2002)

    Article  CAS  Google Scholar 

  4. Carlos, R., Takaya, S., Rika, F., Hironobu, K.: Phase diagrams and microstructure of aggregates in mixed ionic surfactant/foam booster systems. J. Colloid Interface Sci. 270, 483–489 (2004)

    Article  Google Scholar 

  5. Mannhardt, K., Svorstøl, I.: Surfactant concentration for foam formation and propagation in Snorre reservoir core. J. Petroleum Sci. Eng. 30, 105–119 (2001)

    Article  CAS  Google Scholar 

  6. Ge, H., Fu, P.L., Wang, J., Zhu, D.M.: Study on foaming capacity of disodium sulfosuccinate of monolauryl alcohol polyoxyethylene-3-ether. Appl. Chem. Ind. 32, 16–18 (2003)

    CAS  Google Scholar 

  7. Condon, B.D.: Foam enhancement by short-chain hydrophobe alcohol ethoxylates in light-duty liquids. J. Am. Oil Chem. Soc. 71, 783–787 (1994)

    Article  CAS  Google Scholar 

  8. Jiang, P., Xu, G.Y., Yuan, S.L.: Stabilizing effect of gelatin on the foam made from sodium dodecyl sulfate/cetylpyridinium bromide mixtures. China Surfactant Deterg. Cosmet. 6, 7–9 (2001)

    Google Scholar 

  9. Avegard, R., Binks, B.P.: Aspects of aqueous foam stability in the presence of hydrocarbon oil and solid particles. Adv. Colloid Interface Sci. 48, 93–120 (1994)

    Article  Google Scholar 

  10. Angarska, J.K., Tachev, K.D., Ivanov, I.B., Mehreteab, A., Brose, G.: Effect of magnesium ions on the properties of foam films stabilized with sodium dodecyl sulfate. J. Colloid Interface Sci. 195, 316–328 (1997)

    Article  CAS  Google Scholar 

  11. Taylor, D.J.F., Thomas, R.K., Penfold, J.: Polymer/surfactant interactions at the air/water interface. Adv. Colloid Interface Sci. 132, 69–110 (2007)

    Article  CAS  Google Scholar 

  12. Zhang, Y.X., Fang, Q.: Advances in the development water-soluble polymer. J. Funct. Polym. 3, 102–109 (1997)

    Google Scholar 

  13. Zana, R., Linaos, P., Langc, J.: Fluorescent probe studies of the interactions between poly(oxythylene) and surfactant micelles and microemulsion droplets in water. J. Phys. Chem. 89, 41–44 (1985)

    Article  CAS  Google Scholar 

  14. Rice, P., Teja, A.S.: Surface concentrations and molecular interactions in binary mixtures of surfactants. J. Colloid Interface Sci. 86, 164–172 (1982)

    Article  Google Scholar 

  15. Chlebicki, J., Majtyka, P.: Effect of oxypropylene chain length on the surface properties of dialkyl glycerol ether nonionic surfactants. J. Colloid Interface Sci. 220, 57–62 (1999)

    Article  CAS  Google Scholar 

  16. Taboada, P., Attwood, D., Ruso, J.M.: Effect of electrolyte on the surface and thermodynamic properties of amphiphilic penicillins. J. Colloid Interface Sci. 220, 288–292 (1999)

    Article  CAS  Google Scholar 

  17. Hiroyasu, N., Shinobu, K., Tatsuro, M.: Study of salt effects on the micelle–monomer exchange process of octyl-, decyl-, and dodecyltrimethylammonium bromide in aqueous solutions by means of ultrasonic relaxation spectroscopy. J. Colloid Interface Sci. 230, 22–28 (2000)

    Article  Google Scholar 

  18. Zhao, G.X.: Physical Chemistry of Surfactant, pp. 241–300. Beijing University, Beijing (1984)

    Google Scholar 

  19. Gao, J.C., Liang, F.Z., Li, G.Z.: The interaction between dodecyl betain and polyvinylpyrrolidone. Chem. J. Chin. Universities 19, 111–115 (1998)

    Google Scholar 

  20. Xu, G.Y., Sui, W.P., Li, G.Z.: The interaction between PVP and C14BE. Acta Chim. Sinica 55, 1179–1184 (1997)

    CAS  Google Scholar 

  21. Tokowa, F., Tsujh, K.: Solubilization behavior of the surfactant-polyethylene glycol complex in relation to the degree of polymerization. Bull. Chem. Soc. Jpn. 46, 2684–3686 (1973)

    Article  Google Scholar 

  22. Murata, M., Arai, H.: The interaction between polymer and surfactant: The effect of temperature and added salt on the interaction between polyvinylpyrrolidone and sodium dodecyl sulfate. J. Colloid Interface Sci. 44, 475–480 (1973)

    Article  CAS  Google Scholar 

  23. Chen, A.M., Xu, G.Y., Wei, X.L.: The binding of dodecyloxypropyl-β-hydroxyltrimethyl ammonium bromide on different polyanions. Chem. J. Chin. Universities 23, 665–669 (2002)

    Google Scholar 

  24. Yin, B.L., Zhang, G.Y., Wei, X.L.: The interaction between 3-alkoxyl-2-hydroxylpropyl trimethyl ammonium chloride and sodium dodecyl sulfonate in mixture solution. China Surfactant Detergent Cosmet. 4, 18–22 (1998)

    Google Scholar 

  25. Mollet, C., Touhami, Y., Hornof, V.: A comparative study of the effect of ready-made and in situ-formed surfactants on interfacial tension measured by drop volume tensiometry. J. Colloid Interface Sci. 178, 523–530 (1996)

    Article  CAS  Google Scholar 

  26. Qiu, X.M., Wei, X.L., Yin, B.L., Sun, D.-Z.: Thermodynamics of interaction between sodium bis(2-ethyhexyl) sulfosuccinate and polymers in aqueous solution by isothermal titration microcalorimetry. J. Polym. Sci. B Polym. Phys. 44, 275 (2006)

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Xi-Lian Wei.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wei, XL., Fu, SZ., Liu, J. et al. Research of Foam Performance of 3-Dodecyloxy-2-hydroxypropyl Trimethylammonium Bromide and Its Complex Systems. J Solution Chem 37, 403–412 (2008). https://doi.org/10.1007/s10953-007-9239-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10953-007-9239-x

Keywords

Navigation