Abstract
The method for preparation of boroorganic compound with application of N,N′-di(methyleneoxy-3-hydroxypropyl)urea and boric acid has been described. Then, the borate prepared was characterized mainly in the terms of its usability as a polyol component and fire retardant for production of the rigid polyurethane-polyisocyanurate foams. Method of preparation, the determination of foaming parameters, physicomechanical and fire properties of PUR-PIR foams as well as the results of tests have been presented. The recipe for foam preparation was modified by application of physical and chemical method of foaming. On the basis of the results, it was found that application of the new compound in recipe for production of foams is very favourable. The rigid foams obtained are characterized by lower brittleness, higher compressive strength, lower thermal conductivity and considerably lower flammability in comparison with a standard foam.
Similar content being viewed by others
References
P. Żach, Tworzywa Sztuczne i Chemia 2, III–IV (2006)
D. Randall, S. Lee (eds.), The Polyurethanes Book (Willey Ltd., New York, 2002)
J. Trotzsch, Plastics Flammability Handbook, 3rd edn. (Carl Hanser Verlag, Munich, 2004)
O. Maurerem, Polyurethanes Mag. Int. 04, 234 (2007)
A. Prociak, J. Pielichowski, M. Modesti, F. Simioni, Cell. Polym. 16, 284 (1997)
J. Paciorek-Sadowska, B. Czupryński, J. Appl. Polym. Sci. 102(6), s.5918 (2006)
B. Czupryński, J. Paciorek-Sadowska, J. Liszkowska, J. Appl. Polymer Sci. 100, s.2020 (2006)
B. Czupryński, J. Paciorek-Sadowska, J. Liszkowska, J. Polymer Eng. 22(1), 59 (2002)
J. Green, J. Fire Sci. 12 257 (1994)
E. Kicko-Walczak, Polimery 53, nr 2 (2008)
A.F. Grand, C.A. Wilkie, Fire Retardanty of Polymeric Materiale (Nowy Jork, Marcel Dekker, 2000)
K. Pielichowski, K. Kulesza, E.M. Pearce, J. Appl. Polym. Sci. 88 2319 (2002)
E. Kicko-Walczak, P. Jankowski, Polimery 49, 747 (2004)
B. Czupryński, Rozprawa nr 66 (ATR Bydgoszcz, Poland, 1997)
B. Czupryński, H. Masłowski, K. Kozłowski, Polimery 33, 16–19 (1988)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Paciorek-Sadowska, J. Modification of PUR-PIR foams by boroorganic compound prepared on the basis of di(hydroxymethyl)urea. J Porous Mater 19, 161–171 (2012). https://doi.org/10.1007/s10934-011-9456-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10934-011-9456-y