Abstract
This work sought to improve the properties of polypropylene (PP) for single layer film application by incorporating low density polyethylene (LDPE), poly(lactic acid) (PLA) and montmorillonite (MMT). The addition of LDPE in PP improved the elongation at break and tear strength. The PP/LDPE blend at a 80:20 (w/w) ratio was selected for blending with PLA and MMT and the PP/LDPE/PLA/MMT composite showed an increased tensile modulus, while the elongation at break decreased, with increasing PLA and MMT contents. The morphological structure of the respective nanocomposites was examined using X-ray diffraction, transmission electron microscopy and scanning electron microscopy analyses. For the barrier properties, the incorporation of PLA and MMT in PP/LDPE blend tended to dramatically decrease the oxygen permeability but slightly increase the water vapor permeability. Moreover, the PP/LDPE/PLA/MMT composite as a new effective film decreased the tomato loss weight during low temperature storage (15–20 °C) compared to the PP film.
Similar content being viewed by others
References
Feldman D (2001) Polymer barrier films. J Polym Environ 9:49–55
Devesh T (2002) Practical guide to polypropylene. First Published, United Kingdom
Cormelia V, Mihaela P (2005) Practical guide to polyethylene. iSmithers Rapra Publishing, Shawbury
Kadhim LF, Kadhim ZF (2017) Studying the properties of PP/LDPE polymer blend. Eng Sci 25:193–201
Mofokeng TG, Ojijo V, Ray SS (2016) Influence of blend ratio on the morphology, mechanical, thermal, and rheological properties of PP/LDPE blends. Macromol Mater Eng 302:1191–1201
Chang AC, Tau L, Hiltner A, Baer E (2002) Structure of blown film from blends of polyethylene and high melt strength polypropylene. Polymer 43:4923–4933
Abdel-Hamid IM (2010) Thermo-mechanical characteristics of thermally aged polyethylene/polypropylene blends. Mater Des 31:918–929
Ebadi-Dehaghani H, Barikani M, Khonakdar HA, Jafari SH, Wagenknecht U, Heinrich G (2015) On oxygen gas permeability of PP/PLA/clay nanocomposites: a molecular dynamic simulation approach. Polym Test 45:139–151
Ploypetchara N, Suppakul P, Atong D, Pechyen C (2014) Blend of polypropylene/poly(lactic acid for medical packaging application: physichemical, thermal, mechanical and barrier properties. Energy Proc 56:201–210
Ebadi-Dehaghani H, Khonakdar HA, Barikani M, Jafari SH (2015) Experimental and theoretical analyses of mechanical properties of PP/PLA/clay nanocomposites. Compos B - Eng 69:133–144
Pannirselvan M, Genovese A, Jollands MC, Bhattacharya SN, Shanks RA (2008) Oxygen barrier property of polypropylene-polyether treated clay nanocomposite. Express Polym Lett 2:429–439
Girdthep S, Worajittiphon P, Molloy R, Lumyong S, Leejarkpai T, Punyodom W (2014) Biodegradable nanocomposite blown films based on poly(lactic acid) containing silver-loaded kaolinite: a route to controlling moisture barrier property and silver ion release with a prediction of extended shelf life of dried longan. Polymer 55:6776–6788
Espinosa KR, Castillo LA, Barbosa SE (2016) Blown nanocomposite films from polypropylene and talc, Influence of talc nanoparticles on biaxial properties. Mater Des 111:25–35
Suyatma NE, Copinet A, Tighzert L, Coma V (2004) Mechanical and barrier properties of biodegradable films made from chitosan and poly(lactic acid) blends. J Polym Environ 12:1–6
Kasai D, Chougale R, Masti S, Chalannavar R, Malabadi RB, ·Gani R, Gouripur G (2019) An investigation into the influence of filler piper nigrum leaves extract on physicochemical and antimicrobial properties of chitosan/poly(vinyl alcohol) blend films. J Polym Environ 27:472–488
Nouri M, Morshedian J, Rabbani A, Ghasemi I, Ebrahimi M (2006) Investigation of LLDPE/LDPE blown films by response surface methodology. Iran Polym J 15(2):155–162
Chang AC, Chum SP, Hiltner A, Baer E (2002) Mechanisms of ductile tear in blown film from blends of polyethylene and high melt strength polypropylene. Polymer 43:6515–6526
Kodgire P, Kalgaonkar R, Hambir S, Bulakh N, Jog JP (2001) PP/Clay nanocomposites: effect of clay treatment on morphology and dynamic mechanical properties. J Appl Polym Sci 81:1786–1792
Tabatabaei SH, Ajji A (2012) Crystal structure and orientation of uniaxially and biaxially oriented PLA and PP nanoclay composite films. J Appl Polym Sci 124:4854–4863
Wittmann JC, Lotz B (1990) Epitaxial crystallization of polymers on organic and polymeric substrates. Prog Polm Sci 15(6):909–948
Fan Y, Lou JJ, Jamali J, Lu YC, Wood JT (2017) Effect of clay dispersion on the nonisothermal and isothermal crystallization behaviors of polyethylene composites. Polym Plast Technol Eng 56(15):1646–1656
Pivasaart S, Kordsaard J, Pivsaart W, Wongpajan R, Ocharoen N, Pavasupree S, Hamada H (2016) Effect of compatibilizer on PLA/PP blend for injection molding. Energy Proc 89:353–360
Kim HS, Kim HJ (2013) Miscibility and performance evaluation of natural-flour-filled PP/PBS and PP/PLA bio-composite. Fiber Polym 14(4):793–803
Jariyakulsith P (2017) Mechanical properties of PLA/PP blended utilizing compatibilizer, Chulalongkorn University
Sui G, Jing M, Zhao J, Wang K, Zhang Q, Fu QA (2018) Comparison study of high shear force and compatibilizer on the phase morphologies and properties of polypropylene/polylactide (PP/PLA) blends. Polymer 154:119–127
Dong Y, Bhattacharyya D (2012) Investigation on the competing effects of clay dispersion and matrix plasticisation for polypropylene/clay nanocomposites. Part I: morphology and mechanical properties. J Mater Sci 47:3900–3912
Garca-López D, Picazo O, Merino JC. Pastor JM (2003) Polypropylene–clay nanocomposites: effect of compatibilizing agents on clay dispersion. Eur Polym J 39:945–950
Girdthep S, Worajittiphon P, Leejarkpai T, Molloy R, Punyodom W (2016) Effect of silver-loaded kaolinite on real ageing, hydrolytic degradation, and biodegradation of composite blown films based on poly(lactic acid) and poly(butylene adipate-co-terephthalate). Eur Polym J 82:244–259
Duan Z (2013) Water vapour permeability of bio-based polymers. Loughborough University, East Midlands
Rhim JW (2011) Effect of clay contents on mechanical and water vapor barrier properties of agar-based nanocomposite films. Carbohydr Polym 86(2):691–699
Sahoo NR, Bal LM, Pal US, Sahoo D (2015) Effect of packaging conditions on quality and shelf-life of fresh pointed gourd (Trichosanthes dioica Roxb.) during storage. Food Packaging Shelf 5:56–62
Chuayjuljit S, Wongwaiwattanakul C, Chaiwutthinan P, Prasassarakich P (2018) Biodegradable poly(lactic acid)/poly(butylene succinate)/wood flour composites: physical and morphological properties. Polym Compos 38:2841–2851
Klungsuwan P, Jarerat A, Poompradub S (2013) Mechanical properties and biodegradability of cuttlebone/NR composites. J Polym Environ 21:766–779
Acknowledgements
The authors acknowledge the IRPC Public Company Limited and the Program of Petrochemistry and Polymer Science, Faculty of Science, Chulalongkorn University for material and instrument support. We would like to thank Dr. Robert Butcher for proof reading the article and suggestions.
Author information
Authors and Affiliations
Contributions
The manuscript was written through contributions of all authors. All authors have given approval to the final version of the manuscript and contributed equally. Conceptualization: PP, SM. Methodology: PP, SM, SP, Formal analysis and investigation: SM, Writing - original draft preparation: SM, Writing - review and editing: PP, SP, Funding acquisition: PP, SM, Resources: PP, SM, Supervision: PP, SP.
Corresponding author
Ethics declarations
Conflict of interest
The authors declared no potential conflicts of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Mooninta, S., Poompradub, S. & Prasassarakich, P. Packaging Film of PP/LDPE/PLA/Clay Composite: Physical, Barrier and Degradable Properties. J Polym Environ 28, 3116–3128 (2020). https://doi.org/10.1007/s10924-020-01840-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10924-020-01840-6