Abstract
Annatto natural colorant was extracted from annatto seeds (Bixa Orellana L.) by using ultrasound. Structural characterization of the extract was done by FTIR. The aim of the present work was the developement and characterization of biodegradable colored films based on poly(3-hydroxybutyrate) by using annatto colorant. The annatto content in the films was varied from 0.2 to 3.0% (w/w). The lightfastness of colored films when exposed to UVA radiation was controlled by using RGB color system. In color image processing, a pixel is often defined by three values corresponding to the tristimuli R (Red), G (Green) and B (Blue). With the addition of the annatto colorant, photodegradation of films under UVA exposure seemed to be improved. The good thermal stability of the colored film with 3.0% (w/w) of annatto colorant was confirmed by thermogravimetric analysis. Surface morphology of the colored film with 3.0% (w/w) of annatto colorant was examined by SEM prior and after 240 h of UVA exposure. The SEM micrographs suggested that annatto colorant has acted as hiding agent, reducing the photodegradation processes.
Similar content being viewed by others
References
Laycock B, Halley P, Pratt S, Werker A, Lant P (2013) Prog Polym Sci 38:536–583
Tokiwa Y, Calabia BP (2004) Biotechnol Lett 26:1181–1189
Bucci DZ, Tavares LB, Sell I (2007) Polym Test 26:908–915
Chea V, Angellier-Coussy H, Peyron S, Kemmer D, Gontard N (2016) J Appl Polym Sci 41850:1–8
Guo J, Zhang Q, Cai Z, Zhao K (2016) Sep Purif Technol 161:69–79
Ramier J, Bouderlique T, Stoilova O, Manolova N, Rashkov I, Langlois V, Renard E, Albanese P, Grande D (2014) Mater Sci Eng C Mater Biol Appl 38:161–169
Allen NS (1994) Polym Degrad Stab 44:357–374
Mirjalili M, Nazarpoor K, Karimi L (2011) J Cleaner Prod 19:1045–1051
Shahid M, ul-Islam S, Mohammad F (2013) J Cleaner Prod 53:310–331
Yusuf M, Shabbir M, Mohammad F (2017) Nat Prod Bioprospect 7:123–146
Leitner P, Fitz-Binder C, Mahmud-Ali A, Bechtold T (2012) Dyes Pigment 93:1416–1421
Mahmud-Ali A, Fitz-Binder C, Bechtold T (2012) Dyes Pigment 94:533–540
Velho SRK, Brum LFW, Peter CO, dos Santos JHZ, Šimunić Š, Kappa WH (2017) Dyes Pigment 136:248–254
da Costa CLS, Chaves MH (2005) Quim Nova 28:149–152
Mehta AA, Behera LK, Tandel MB, Jadeja DB, Vashi BG (2015) J Appl Nat Sci 7:828–831
Chowdhury AI, Molla AI, Sarker M, Rana AA, Ray SK, Nur HP, Karim MM (2010) Int J Basic Appl Sci 10:7–15
Prabhakara Rao PG, Jyothirmayi T, Balaswamy K, Satyanarayana A, Rao DG (2005) LWT 38:779–784
Balaswamy K, Prabhakara Rao PG, Satyanarayana A, Rao DG (2006) LWT 39:952–956
Silva GF, Gamarra FMC, Oliveira AL, Cabral FA (2008) Braz J Chem Eng 25:419–426
Taham T, Cabral FA, Barrozo MAS (2015) J Supercrit Fluids 100:175–183
Barrozo MAS, Santos KG, Cunha FG (2013) Ind Crops Prod 45:279–282
Taham T, Silva DO, Barrozo MAS (2016) Sep Purif Technol 158:313–321
Cuong TV, Chin KB (2016) Korean J Food Sci Anim Resour 36:476–486
ul-Islam S, Rather LJ, Mohammad FJ (2016) Adv Res 7:499–514
de Sousa AR, Dornas GP, Carvalho IC, da Silva Santos RF (2016) Int J Polym Sci 2016:1–12.
Kohno Y, Asai S, Shibata M, Fukuhara C, Maeda Y, Tomita Y, Kobayashi K (2014) J Phys Chem Solids 75:945–950
Mottin AC (2011) Produção e Caracterização de Compósito polimérico Poli(hidroxibutirato) (PHB)/Cloisite® 30B com aditivos plastificantes. Dissertation (Materials Engineering Masters), REDEMAT (Rede Temática em Engenharia de Materiais), Belo Horizonte
Yolmeh M, Najafi MBH, Farhoosh R (2014) Food Chem 155:319–324
Rahmalia W, Fabre J-F, Mouloungui Z (2015) Proced Chem 14:455–464
Zongo S, Kerasidou AP, Sone BT, Diallo A, Mthunzi P, Iliopoulos K, Nkosi M, Maaza M, Sahraoui B (2015) Appl Surf Sci 340:72–77
Yousif E, Hasan A (2015) J Taibah Univ Sci 9:421–449
Yousif E, Haddad R (2013) Springerplus 2:398–430
Viana TC, Pagnan CS, Ayres E (2015) J Int Colour Assoc 14:47–56
Usop R, Abidin ZHZ, Mazni NA, Hadi AN, Halim NA, Taha RM, Careem MA, Majid SR, Arof AK (2016) Pigment Resin Technol 45:149–174
Michel AT, Billington SL (2012) Polym Degrad Stab 97:870–878
ul-Islam S, Rather LJ, Shahid M, Khan MA, Mohammad F (2014) Ind Crops Prod 59:337–342
Bunkholt I, Kleiv RA (2014) Miner Eng 56:129–135
Baliarsingh S, Behera PC, Jena J, Das T, Das NB (2015) J Cleaner Prod 102:485–492
van den Oever MJA, Boeriu CG, Blaauw R, van Haveren J (2004) J Appl Polym Sci 92:2061–2969
Yonehara M, Matsui T, Kihara K, Isono H, Kijima A, Sugibayashi T (2004) Mater Trans 45:1027–1032
Ignell S, Kleist U, Rigdahl M (2009) Col Res Appl 34:291–298
Saron C, Felisberti MI (2006) Quim Nova 29:124–128
Sadi RK, Fechine GJM, Demarquette NR (2010) Polym Degrad Stab 95:2318–2327
Hou X, Chen X, Cheng Y, Xu H, Chen L, Yang Y (2013) J Clean Prod 52:410–419.
Silva MCD, Botelho JR, Conceição MM, Lira BF, Coutinho MA, Dias AF, Souza AG, Filho PFA (2005) J Therm Anal Calorim 79:277–281
Erceg M, Kovačić T, Klaric I (2005) Polym Degrad Stab 90:313–318
Hablot E, Bordes P, Pollet E, Avérous L (2008) Polym Degrad Stab 93:413–421
Quader FB, Khan RA, Islam MA, Saha S, Sharmin KNJ (2015) Environ Sci Nat Resour 8:123–130
Acknowledgements
The authors gratefully acknowledge National Council for Scientific and Technological Development (CNPq) and Foundation for Research Support of Minas Gerais State (FAPEMIG) for the financial support and Coordination of Improvement of Senior Staff (CAPES) for the research studentship.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pagnan, C.S., Mottin, A.C., Oréfice, R.L. et al. Annatto-colored Poly(3-hydroxybutyrate): A Comprehensive Study on Photodegradation. J Polym Environ 26, 1169–1178 (2018). https://doi.org/10.1007/s10924-017-1026-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10924-017-1026-1