Skip to main content
SpringerLink
Log in

Assessment of Thermal Damage in Polymethyl Methacrylate Using Quasi-static Components of Ultrasonic Waves

  • Published:
Journal of Nondestructive Evaluation Aims and scope Submit manuscript

Abstract

A nonlinear acoustic response can be an effective indicator of early-stage damage in a material. However, it is challenging to use this approach to assess thermal damage in highly attenuating materials such as polymethyl methacrylate by measurement of the generated second harmonics, which are present at double the fundamental frequency of the primary waves. Using the quasi-static components (QSCs) generated by ultrasonic-wave propagation in damaged structures—an approach that combines the high sensitivity of acoustic nonlinearities with low attenuation—has great potential for evaluation of early-stage damage in highly attenuating materials. In this paper, an experimental approach for directly detecting the QSC pulses from ultrasonic-wave tone bursts is proposed. In this approach, a high-frequency longitudinal-wave transducer is used for exciting the primary ultrasonic-wave tone burst, and the co-propagating QSC pulse is detected using a low-frequency ultrasonic transducer. The phase-reversal technique is employed to enhance the signal-to-noise ratio of the QSC pulse and to counteract the signals of the primary ultrasonic waves. In the experimental results, variations in the amplitudes of the QSC pulse in response to different degrees of thermal damage are clearly illustrated in a repeatable manner, even though the changes in the linear ultrasonic features in these specimens are negligible. These results indicate that the measurement of QSC pulse generation from ultrasonic-wave propagation is a promising alternative for evaluating thermal degradation in highly attenuating materials.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

Data Availability

Not applicable.

References

  1. Johnson, J.A., Jones, D.W.: The mechanical properties of PMMA and its copolymers with ethyl methacrylate and butyl methacrylate. J Mater Sci 29, 870–876 (1994). https://doi.org/10.1007/BF00351404

    Article  Google Scholar 

  2. Ali, U., Karim, K.J.B.A., Buang, N.A.: A review of the properties and applications of polymethyl methacrylate (PMMA). Polym Rev 55, 678–705 (2015). https://doi.org/10.1080/15583724.2015.1031377

    Article  Google Scholar 

  3. Babo, S., Ferreira, J.L., Ramos, A.M., et al.: Characterization and long-term stability of historical PMMA: impact of additives and acrylic sheet industrial production process. Polymers 12, 2189 (2021). https://doi.org/10.3390/polym12102198

    Article  Google Scholar 

  4. Kariduraganavar, M.Y., Kittur, A.A., Kamble, R.R.: Polymer synthesis and processing. In: Laurencin, C.T., Deng, M., Kumbar, S.G. (eds.) Natural and Synthetic Biomedical Polymers, pp. 1–13. Elsevier, Amsterdam (2014)

    Google Scholar 

  5. Krautkrämer, J., Krautkrämer, H.: Ultrasonic Testing of Materials. Springer, Berlin (2013)

    Google Scholar 

  6. Best, S.R., Croxford, A.J., Neild, S.A.: Pulse-echo harmonic generation measurements for non-destructive evaluation. J Nondestruct Eval 33, 205–215 (2014). https://doi.org/10.1007/s10921-013-0213-9

    Article  Google Scholar 

  7. Lissenden, C.J., Liu, Y., Choi, G.W., Yao, X.: Effect of localized microstructure evolution on higher harmonic generation of guided waves. J Nondestruct Eval 33, 178–186 (2014). https://doi.org/10.1007/s10921-014-0226-z

    Article  Google Scholar 

  8. Matlack, K.H., Kim, J.Y., Jacobs, L.J., Qu, J.: Review of second harmonic generation measurement techniques for material state determination in metals. J Nondestruct Eval 34, 1–23 (2015). https://doi.org/10.1007/s10921-014-0273-5

    Article  Google Scholar 

  9. Xiang, Y., Deng, M., Xuan, F.: Thermal degradation evaluation of HP40Nb alloy steel after long term service using a nonlinear ultrasonic technique. J Nondestruct Eval 33, 279–287 (2014). https://doi.org/10.1007/s10921-013-0222-8

    Article  Google Scholar 

  10. Hamilton, M.F., Blackstock, D.T.: Nonlinear Acoustics. Academic press, San Diego (1998)

    Google Scholar 

  11. Li, W.B., Deng, M.X., Xiang, Y.X.: Review on second-harmonic generation of ultrasonic guided waves in solid media (I): Theoretical analyses. Chin Phys B 26, 114302 (2017). https://doi.org/10.1088/1674-1056/26/11/114302

    Article  Google Scholar 

  12. Li, W.B., Cho, Y., Achenbach, J.D.: Detection of thermal fatigue in composites by second harmonic Lamb waves. Smart Mater Struct 21, 085019 (2012). https://doi.org/10.1088/0964-1726/21/8/085019

    Article  Google Scholar 

  13. Nagy, P.B.: Fatigue damage assessment by nonlinear ultrasonic material characterization. Ultrasonics 136, 275–381 (1998). https://doi.org/10.1016/S0041-624X(97)00040-1

    Article  Google Scholar 

  14. Cantrell, J.H., Yost, W.T.: Nonlinear ultrasonic characterization of fatigue microstructures. Int J Fatigue 23, 487–490 (2001). https://doi.org/10.1016/S0142-1123(01)00162-1

    Article  Google Scholar 

  15. Li, W.B., Cho, Y., Hyun, S.: Characteristics of ultrasonic nonlinearity by thermal fatigue. Int J Precis Eng Manuf 13, 935–940 (2012). https://doi.org/10.1007/s12541-012-0121-4

    Article  Google Scholar 

  16. Deng, M.: An experimental approach for detection of the acoustic radiation induced static component in solids. Chin Phys Lett 37, 074301 (2020). https://doi.org/10.1088/0256-307X/37/7/074301

    Article  Google Scholar 

  17. Jiang, C., Li, W.B., Deng, M., Ng, C.-T.: Static component generation and measurement of nonlinear guided waves with group velocity mismatch. JASA Express Lett 1, 055601 (2021). https://doi.org/10.1121/10.0004847

    Article  Google Scholar 

  18. Jiang, C., Li, W.B., Deng, M., Ng, C.-T.: Quasistatic pulse generation of ultrasonic guided waves propagation in composites. J Sound Vib 524, 116764 (2022). https://doi.org/10.1016/j.jsv.2022.116764

    Article  Google Scholar 

  19. Nagy, P.B., Qu, J., Jacobs, L.J.: Finite-size effects on the quasistatic displacement pulse in a solid specimen with quadratic nonlinearity. J Acoust Soc Am 134, 1760–1774 (2013). https://doi.org/10.1121/1.4817840

    Article  Google Scholar 

  20. Thurston, R., Shapiro, M.: Interpretation of ultrasonic experiments on finite-amplitude waves. J Acoust Soc Am 41, 1112–1125 (1967). https://doi.org/10.1121/1.1910443

    Article  Google Scholar 

  21. Cantrell, J.H.: Acoustic-radiation stress in solids. I. Theory. Phys Rev B 30, 3214 (1984). https://doi.org/10.1103/PhysRevB.30.3214

    Article  Google Scholar 

  22. Yost, W.T., Cantrell, J.H.: Acoustic-radiation stress in solids. II. Experiment. Phys Rev B 30, 3221 (1984). https://doi.org/10.1103/PhysRevB.30.3221

    Article  Google Scholar 

  23. Jacob, X., Takatsu, R., Barrière, C., Royer, D.: Experimental study of the acoustic radiation strain in solids. Appl Phys Lett 88, 134111 (2006). https://doi.org/10.1063/1.2191428

    Article  Google Scholar 

  24. Narasimha, K.T., Kannan, E., Balasubramaniam, K.: Simplified experimental technique to extract the acoustic radiation induced static strain in solids. Appl Phys Lett 91, 134103 (2007). https://doi.org/10.1063/1.2793181

    Article  Google Scholar 

  25. Qu, J., Jacobs, L.J., Nagy, P.B.: On the acoustic-radiation-induced strain and stress in elastic solids with quadratic nonlinearity (L). J Acoust Soc Am 129, 3449–3452 (2011). https://doi.org/10.1121/1.3583501

    Article  Google Scholar 

  26. Qu, J., Nagy, P.B., Jacobs, L.J.: Pulse propagation in an elastic medium with quadratic nonlinearity (L). J Acoust Soc Am 131, 1827–1830 (2012). https://doi.org/10.1121/1.3681922

    Article  Google Scholar 

  27. Wan, X., Peter, W.T., Zhang, X., et al.: Numerical study on static component generation from the primary Lamb waves propagating in a plate with nonlinearity. Smart Mater Struct 27, 045006 (2018). https://doi.org/10.1088/1361-665X/aaafeb

    Article  Google Scholar 

  28. Sun, X., Liu, H., Zhao, Y., et al.: The zero-frequency component of bulk waves in solids with randomly distributed micro-cracks. Ultrasonics 107, 106172 (2020). https://doi.org/10.1016/j.ultras.2020.106172

    Article  Google Scholar 

  29. Sun, X., Shui, G., Zhao, Y., et al.: Evaluation of early stage local plastic damage induced by bending using quasi-static component of Lamb waves. NDT E Int 116, 102332 (2020). https://doi.org/10.1016/j.ndteint.2020.102332

    Article  Google Scholar 

  30. Li, W.B., Hu, S., Deng, M.: Combination of phase matching and phase-reversal approaches for thermal damage assessment by second harmonic lamb waves. Materials 11, 1961 (2018). https://doi.org/10.3390/ma11101961

    Article  Google Scholar 

  31. Jiang, C., Zhang, C., Li, W.B., Deng, M., Ng, C.T.: Assessment of damage in composites using static component generation of ultrasonic guided waves. Smart Mater Struct 31, 045025 (2022). https://doi.org/10.1088/1361-665X/ac5a77

    Article  Google Scholar 

Download references

Funding

National Natural Science Foundation of China (Grant Nos. 12134002, 11974295, 12074050, and 11834008); Fundamental Research Funds for the Central Universities (Grant Nos. 2022CDJJJ-009 and 2022CDJXY-012); Technology and Quality Division of the Ministry of Industry and Information Technology (Grant No. JSZL2018602C001); Principal Fund of Xiamen University (Grant No. 20720210040).

Author information

Authors and Affiliations

  1. School of Aerospace Engineering, Xiamen University, Xiamen, 361005, Fujian, China

    Weibin Li, Chang Jiang & Jun Xiao

  2. College of Aerospace Engineering, Chongqing University, Chongqing, 400044, China

    Caibin Xu & Mingxi Deng

  3. School of Civil, Environmental, and Mining Engineering, University of Adelaide, Adelaide, 5005, Australia

    Chang Jiang

Authors
  1. Weibin Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Chang Jiang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jun Xiao
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Caibin Xu
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Mingxi Deng
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

WL and MD conceived and designed the experiments; CJ and JX performed the experimental tests. WL, CX, and CJ analyzed the data; JX, MD, and WL wrote the paper. All authors reviewed and approved the manuscript.

Corresponding author

Correspondence to Mingxi Deng.

Ethics declarations

Competing interests

All authors declare that they have no competing interests as defined by Springer or other interests that might be perceived to influence the results and/or discussion reported in this paper.

Ethical Approval

Not applicable.

Consent to Participate

Not applicable.

Consent for Publication

Not applicable.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Li, W., Jiang, C., Xiao, J. et al. Assessment of Thermal Damage in Polymethyl Methacrylate Using Quasi-static Components of Ultrasonic Waves. J Nondestruct Eval 42, 13 (2023). https://doi.org/10.1007/s10921-023-00923-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10921-023-00923-3

Keywords

Search

Navigation