Abstract
The paper describes calculation of excavation and loading machinery service capacity, considering in more details the influence of mine technical factors.
Similar content being viewed by others
References
V. V. Rzhevsky, Open Mining [in Russian], Nedra, Moscow (1985).
S. G. Molotilov, V. I. Cheskidov, V. K. Norri, et al., “Methodical principles for planning the mining and loading equipment capacity for open cast mining with the use of dumpers. Part II: Engineering capacity calculation,” Journal of Mining Science, No. 1 (2009).
Yu. I. Belyakov, Planning of Excavation [in Russian], Nedra, Moscow (1983).
V. V. Rzhevsky, Open Mining Processes [in Russian], Nedra, Moscow (1978).
Yu. I. Belyakov, Improvement in Excavation and Loading at Quarries [in Russian], Nedra, Moscow (1977).
K. N. Trubetskoy, “Science of loading machine application to open mining,” Synopsis of Dr.Eng. Thesis [in Russian], Moscow (1989).
A. V. Biryukov, V. I. Kuznetsov, and A. S. Tashkinov, Statistical Models in Mining Processes [in Russian], Kuzbassvuzizdat, Kemerovo (1996).
A. S. Tashkinov, A. V. Biryukov, and V. M. Mazaev, “USSR Author’s Certificate No. 1244310. Blasted rock fragment dimensioning method,” Buyll. Izobret., No. 44 (1990).
V. M. Vlasov and A. D. Androsov, Kimberlite Open-Cut Mining in Permafrost Zone [in Russian], YANTS SO RAN, Yakutsk (2007).
Open-Cut Mining Standard Production Quota. Part IV: Excavation and Haulage with Dumpers [in Russian], NII Truda, Moscow (1989).
N. V. Mels’nikov, Open Mining: Theory and Practice [in Russian], Nedra, Moscow (1973).
Yu. I. Belyakov, Excavation and Loading at Open Pits [in Russian], Nedra, Moscow (1973).
M. I. Shchadov, K. E. Vinnitsky, M. G. Potapov, et al., Technological Development in Open Coal Mining [in Russian], Nedra, Moscow (1969).
B. P. Yumatov and B. N. Baikov, Drilling-and-Blasting Engineering at Non-Ferrous Open Pits [in Russian], Nedra, Moscow (1969).
Open Mining Reference Manual [in Russian], au]Gornoe_Byuro, Moscow (1994).
Yu. I. Belyakov and V. M. Vladimirov, Excavation Improvement at Open Pits [in Russian], Nedra, Moscow (1974).
V. S. Kvaginidze, Loading and Haulage Machine Operation in Open Mining in the North [in Russian], MGGU, Moscow (2002).
Research-and-Development Report: To Develop and Validate Standards for the Mining Machinery Effectiveness Enhancement [in Russian], Yakutniproalmaz, Mirny (2005).
Normal Process Flow Sheets for Open Coal Mining [in Russian], Nedra, Moscow (1982).
P. I. Tomakov, Structure of Comprehensive Mechanization at Open Pits with Cycling Technology [in Russian], Nedra, Moscow (1976).
Open Mining Maintenance Mechanic Handbook [in Russian], Nedra, Moscow (1989).
Economic Agreement No. 340-24 Report: Analysis and Assessment of Mining Machinery Effectiveness at the ALROSA LCC Open Pits in Comparison with the Other Mining Companies [in Russian], IGD SO RAN, Novosibirsk (2003).
S. G. Molotilov, V. I. Cheskidov, and V. K. Norri, “Methodical principles for planning the mining and loading equipment capacity for open cast mining with the use of dumpers. Part I,” Journal of Mining Science, No. 4 (2008).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 1, pp. 45–60. January–February, 2010.
Rights and permissions
About this article
Cite this article
Molotilov, S.G., Cheskidov, V.I., Norri, V.K. et al. Methodical principles for planning the mining and loading equipment capacity for open cast mining with the use of dumpers. Part III: Service capacity determination. J Min Sci 46, 38–49 (2010). https://doi.org/10.1007/s10913-010-0006-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10913-010-0006-9