Abstract
The author describes the construction of an explosion booster composed of a waveguide and a membrane. The booster is placed at the bottom of a blast hole and is initiated by detonation wave. Experimental underground tests of explosion boosters showed the qualitative ore blasting results, in particular, with fan-patterned blast hole drilling.
Similar content being viewed by others
References
I. A. Krasnopol’skii, V. M. Kuznetsov, V. D. Petrenko, and A. F. Shatsukevich, “Rock failure by blast hole and bore-hole charges,” in: Blasting. Collected Works No. 83/40. Measurement Procedure and Instrumentation for Blast Action Investigation [in Russian], Nedra, Moscow (1982).
S. V. Muchnik and Yu. D. Chugunov, “Vibrator application to improve blasting in the periphery of bore-hole fans,” Gorny Zh., No. 12 (2001).
A. A. Adkhamov, T. M. Muinov, and Z. A. Kabilov, “Variation in durability of a polymer in the ultrasound field,” Dokl. Akad. Nauk, Tadzhik SSR [in Russian], 16, No. 9 (1973).
E. V. Shumilova, V. V. Semenov, et al., “Investigation of the ultrasound effect on the gas — coal system,” Razrab. Mest. Polezn. Iskop., No. 35, Naukova Dumka, Kiev (1974).
M. A. Margulis, “Relationship of the sonochemical reaction velocity and ultrasound wave intensity,” Zh. Fiz. Khim., 48, No. 9 (1974).
Author information
Authors and Affiliations
Corresponding author
Additional information
__________
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 6, pp. 30–35, November–December, 2008.
Rights and permissions
About this article
Cite this article
Muchnik, S.V. Explosion booster for blast hole fans. J Min Sci 44, 554–558 (2008). https://doi.org/10.1007/s10913-008-0062-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10913-008-0062-6