Abstract
The impact energy damping stand is designed to test pneumatic hammers. The choice of material to be a damping material is reasoned. Deformation is established for the damping material under an impact impulse effect. The calculation method is proposed to evaluate the basic damper parameters for the stand.
Similar content being viewed by others
References
A. D. Kostylev, V. V. Trubitsyn, Kh. B. Tkach, V. M. Terin, S. V. Shalunov, and V. V. Chervov, “USSR Author’s Certificate No. 1461833. Method for measurement of impact energy of an impactor and the stand for its implementation,” Byull. Izobret., No. 8 (1989).
G. I. Kusnitsyn, Pneumatic Hand Machines. Handbook [in Russian], Mashinostroyeniye, Moscow (1968).
B. N. Smolyanitskii, V. V. Chervov, and V. I. Vostrikov, “Pressure in damping device under impulse load,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 4 (2001).
V. V. Chervov, V. V. Trubitsyn, B. N. Smolyanitskii, A. T. Syryamin, and B. B. Danilov, “USSR Author’s Certificate No. 1268675. Test stand for impact devices,” Byull. Izobret., No. 41 (1986).
V. V. Chervov, V. V. Klimashko, V. V. Trubitsyn, Kh. B. Tkach, V. M. Terin, and O. L. Bezrodnaya, “USSR Author’s Certificate No. 1618021. Test stand for impact machines,”
Kh. B. Tkach, A. D. Kostylev, E. N. Sher, V. V. Trubitsyn, A. Prasolov, V. V. Chervov, V. M. Terin, and V. E. Shabat, “USSR Author’s Certificate No. 1640302. Method for evaluation of the impact machine energy and stand for its implementation,” Byull. Izobret., No. 13 (1991).
V. V. Trubitsyn, Kh. B. Tkach, V. V. Chervov, V. M. Terin, O. L. Bezrodnaya, V. G. Verganovskii, and M. A. Nadbaevskii, “USSR Author’s Certificate No. 1671794. Comparator-based determination of an impact machine energy and stand for its implementation,” Byull. Izobret., No. 31 (1991).
Author information
Authors and Affiliations
Additional information
__________
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 6, pp. 58–65, November–December, 2007.
Rights and permissions
About this article
Cite this article
Chervov, V.V., Smolentsev, A.S. Test stand for pneumatic hammers. J Min Sci 43, 618–624 (2007). https://doi.org/10.1007/s10913-007-0068-5
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10913-007-0068-5