Abstract
This study aims to investigate the compressive strengths, ultrasonic pulse velocity, calorimetric, microstructural and rheological properties of calcined laterite-based geopolymer materials. Calcined laterite has been used as an iron-rich aluminosilicate and the hardener containing various molar ratios SiO2/Na2O such as 1.6, 1.8, 2.0 and 2.2 have been used for the preparation of geopolymer materials. The 28-days compressive strengths of the geopolymer materials using sodium waterglass containing molar ratios SiO2/Na2O equal to 1.6, 1.8, 2.0 and 2.2 are 49.98, 48.19, 46.65 and 9.35 MPa, respectively. Their maximum ultrasonic pulse velocities are 3200, 2800, 2000 and 1600 m/s, respectively. Their total heat flows are 85.91, 68.42, 18.50 and 16.34 J/g, respectively. The rheological properties of the geopolymer materials indicate the destruction of the flocculation and the homogenization of the particles of calcined laterite during the formation of the fresh geopolymer prepared using hardeners containing the molar ratios SiO2/Na2O equal to 1.6, 1.8 and 2.0. The one from molar ratio SiO2/Na2O equal to 2.2 contains more flocculation and therefore inhibits the geopolymerization process. It was found that the compressive strengths decrease with decreasing the amorphous phase content, the ultrasonic pulse velocities, total heat flow and corroborate the rheological properties of calcined laterite-based geopolymer materials.
Similar content being viewed by others
References
J. Davidovits, Geopolymer Chemistry and Applications, 3rd edn. (Institute Geopolymer, Saint-Quentin, 2011), p.612
J.N.F. Nouping, C.R. Kaze, L.L. Duna, A. Gharzouni, I.N. Mbouombuo, E. Kamseu, S. Rossignol, C. Leonelli, Effects of curing cycles on developing strength and microstructure of goethite-rich aluminosilicate (corroded laterite) based geopolymer composites. Mater. Chem. Phys. 270, 124864 (2021). https://doi.org/10.1016/j.matchemphys.2021.124864
M.G.S. Ribeiro, M.R. Sardela, P.F. Keane, J.S. Lopez, W.M. Kriven, R.A.S. Ribeiro, Lateritic soil geopolymer composites for ceramics and engineering construction applications. Int. J. Appl. Cer. Tech. 19, 2148–2159 (2022). https://doi.org/10.1111/ijac.14046
A. Anburuvel, N. Sathiparan, G.M.A. Dhananjaya, A. Anuruththan, Characteristic evaluation of geopolymer based lateritic soil stabilization enriched with eggshell ash and rice hush ash for road construction: an experimental investigation. Construct. Build. Mater. 387, 131659 (2023). https://doi.org/10.1016/j.conbuildmat.2023.131659
C. Banupriya, S. John, R. Suresh, E. Divya, D. Vinitha, Experimental investigations on geopolymer bricks/paver blocks. Ind. Jour. Sci. Tech. 9, 1–5 (2018). https://doi.org/10.17485/ijst/2016/v9i16/92209
N.S.A. Yaro, M. Napiah, M.H. Sutanto, A. Usman, A.H. Jagaba, A.U. Mani, A. Ahmad, Geopolymer utilization in the pavement industry-an overview. IOP Conf. Ser. Earth Environ. Sci. 1022, 012025 (2022). https://doi.org/10.1088/1755-1315/1022/1/012025
T.V. Nagaraju, B.M. Sumil, M.V. Rao, Utilization of GGBS-Based Geopolymer Lateritic Soils for Sustainable Pavements, in Recent Trends in Civil Engineering Select Proceedings of ICRACE 2021. ed. by A. Sil, N.K. Deniseenelope, R.K. Pancharathi (Springer, Singapore, 2022), pp.429–439. https://doi.org/10.1007/978-981-19-4055-2_34
S. Saha, C. Rajasekaran, Enhancement of the properties of fly ash based geopolymer paste by incorporating ground granulated blast furnace slag. Constr. Build. Mater. 146, 615–620 (2017)
X. Guan, W. Luo, S. Liu, A.G. Hernandez, H. Do, B. Li, Ultra-high early strength fly ash-based geopolymer paste cured by microwave radiation. Dev. Built Environ. 14, 100139 (2023)
X. Huang, L. Yu, D.W. Li, Y.C. Shiau, S. Li, K.X. Liu, Preparation and properties of geopolymer from blast furnace slag. Mater. Res. Innov. 19, S10-413-S10-419 (2015). https://doi.org/10.1179/1432891715Z.0000000002210
M.I.I. Ramli, M.A.A.M. Salleh, I.H. Aziz, N.S.M. Zaimi, S.F.M. Amli, M.M.A.B. Abdullah, Influence of sintering temperature on the pore structure of an alkali-activated kaolin based geopolymer. Arch. Met. Mater. 68, 987–989 (2023)
T.D. Cong, T. Phuong, M.T. Vu, T.H. Nguyen, Effect of calcium hydroxide on compressive strength and microstructure of geopolymer containing admixture of kaolin, fly ash and red mud. Appl. Sci. 13, 5034 (2023)
A.M.N. Moudio, H.K. Tchakoute, D.L.V. Ngnintedem, F. Andreola, E. Kamseu, C.P. Nanseu-Njiki, C. Lionelli, C.H. Rüscher, Influence of the synthetic calcium aluminate hydrate and the mixture of calcium aluminate and silicate hydrates on the compressive strengths and the microstructure of metakaolin-based geopolymer cements. Mater. Chem. Phys. 264, 124459 (2021)
C.N. Bewa, H.K. Tchakouté, C. Banenzoué, L. Cakanou, T.T. Mbakop, E. Kamseu, C.H. Rüscher, Acid-based geopolymers using waste fired brick and different metakaolins as raw materials. Appl. Clay Sci. 198, 105813 (2020)
S. Iftikhar, K. Rashid, E. Ul Haq, I. Zafar, F.K. Alqahtani, M.I. Khan, Synthesis and characterization of sustainable geopolymer green clay bricks: an alternative to burnt clay brick. Constr. Build. Mater. 259, 119659 (2020)
C.R. Kaze, L.M. Beleuk a Moungam, J.V.S. Metekong, T.S. Alomayri, A. Naghizadeh, L.N. Tchadjie, Thermal behaviour, microstructural changes and mechanical properties of alkali-activated volcanic scoria-fired waste clay brick blends. Dev. Built Environ. 14, 100153 (2023)
J.V.S. Metekong, R.C. Kaze, A. Adesina, J.G.D. Nemaleu, J.N.Y. Djobo, P.N. Lemougna, T. Alomayri, E. Kamseu, U.C. Melo, T.T. Tatietse, Influence of thermal activation and silica modulus on the properties of clayey-lateritic based geopolymer binders cured at room temperature. SILICON 14, 7399–7416 (2022)
R.C. Kaze, A. Naghizadeh, L.N. Tchadjie, A. Adesina, J.N.Y. Djobo, J.G.D. Nemaleu, E. Kamseu, U.C. Melo, B.A. Tayeh, Lateritic soils based geopolymer materials: a review. Constr. Build. Mater. 344, 128157 (2022)
R.C. Kaze, L.M. Beleuk a Moungam, M. Cannio, R. Rosa, E. Kamseu, U.C.F. Melo, C. Leonelli, Microstructure and engineering properties of Fe2O3 (FeO)-Al2O3-SiO2 based geopolymer composites. J. Clean. Prod. 199, 849–859 (2018)
J. Davidovits, R. Davidovits, Ferro-sialate geopolymers, technical papers # 27. Geopolym. Inst. Libr. (2020). https://doi.org/10.13140/RG.2.2.25792.89608/2
P.N. Lemougna, K.J.D. MacKenzie, G.N.L. Jameson, H. Rahier, U.C.F. Melo, The role of iron in the formation of inorganic polymers (geopolymers) from volcanic ash: a 57Fe Mössbauer spectroscopy study. J. Mater. Sci. 48, 5280–5286 (2013)
C.N. Bewa, H.K. Tchakouté, C.H. Rüscher, E. Kamseu, C. Leonelli, Influence of the curing temperature on the properties of poly(phospho-ferro-siloxo) networks from laterite. SN Appl. Sci. 1, 1–12 (2019)
C.R. Kaze, J.N.Y. Djobo, A. Nana, H.K. Tchakouté, E. Kamseu, U.C.F. Melo, C. Leonelli, H. Rahier, Effect of silicate modulus on the setting, mechanical strength and microstructure of iron-rich aluminosilicate (laterite) based-geopolymer cured at room temperature. Ceram. Inter. 44, 21442–21450 (2018)
E. Kamseu, C.R. Kaze, F.J.N. Nouping, U.C.F. Melo, S. Rossignol, C. Leonelli, Ferrisilicates formation during the geopolymerization of natural Fe-rich aluminosilicate precursors. Mater. Chem. Phys. 240, 122062 (2020)
J. Wolf, S. Pirskawetz, A. Zang, Detection of crack propagation in concrete with embedded ultrasonic sensors. Eng. Fract. Mech. 146, 161–171 (2015)
G. Zhao, D. Zhang, L. Zhang, B. Wang, Detection of defects in reinforced concrete structures using ultrasonic nondestructive evaluation with piezoceramic transducers and the time reversal method. Sensors 18, 4176 (2018)
K. Gao, K.-L. Lin, Y. Wang, C.-L. Hwang, H.-S. Shiu, Y.-M. Chang, T.-W. Cheng, Effects SiO2/Na2O molar ratio on mechanical properties and the microstructure of nano-SiO2 metakaolin-based geopolymers. Constr. Build. Mater. 53, 503–510 (2014)
M.M. Yadollahi, A. Benli, R. Demirboga, The effects of silica modulus and aging on compressive strength of pumice-based geopolymer composites. Constr. Build. Mater. 94, 767–774 (2015)
H.K. Tchakouté, C.H. Rüscher, S. Kong, N. Ranjbar, Synthesis of sodium waterglass from white rice husk ash as an activator to produce metakaolin-based geopolymer cements. J. Build. Eng. 6, 252–261 (2016)
W.K.W. Lee, J.S.J. van Deventer, The effects of inorganic salt contamination on the strength and durability of geopolymers. Colloids Surf A Physicochem Eng Asp 211, 115–126 (2002)
Z.H. Zhang, X. Yao, H.J. Zhu, Role of water in the synthesis of calcined kaolin-based geopolymer. Appl. Clay Sci. 43, 218–223 (2009)
S. Dadsetan, H. Siad, M. Lachemi, O. Mahmoodi, M. Sahmaran, Sodium glass liquid from glass waste as a user-friendly hardener in structural geopolymer systems. Cem. Concr. Comp. 130, 104525 (2022)
C.N. Bewa, L. Valentini, H.K. Tchakouté, E. Kamseu, J.N.Y. Djobo, M.C. Dalconi, E. Garbin, G. Artioli, Reaction kinetics and microstructural characteristics of iron-rich-laterite-based phosphate binder. Constr. Build. Mater. 320, 126302 (2022)
N. Döbelin, R. Kleeberg, Profex: a graphical user interface for the Rietveld refinement program BGMN. J. Appl. Crystallogr. 48, 1573–1580 (2015)
A. Mohammed, W. Mahmood, K. Ghafor, Shear stress limit, rheological properties and compressive strength of cement-based grout modified with polymers. J. Build. Pathol. Rehabil. 5, 3 (2020)
I. Hager, T. Zdeb, K. Krzemien, The impact of the amount of polypropylene fibres on spalling behaviour and residual mechanical properties of reactive powder concretes. MATEC Web Conf. (2013). https://doi.org/10.1051/matecconf/20130602003
S. Londoño-Restrepo, R. Jeronimo-Cruz, B. Millán-Malo, E. Rivera-Muñoz, M. Rodriguez-García, Effect of the nano crystal size on the x-ray diffraction patterns of biogenic hydroxyapatite from human, bovine, and porcine bones. Sci. Rep. 9, 5915 (2019)
M. Sofi, J.S.J. van Deventer, P.A. Mendis, G.C. Lukey, Engineering properties of inorganic polymer concretes (IPCs). Cem. Concr. Res. 37, 251–257 (2007)
T.-P. Huynh, C.-L. Hwang, K.-L. Lin, S.-H. Ngo, Effect of residual rice husk ash on mechanical-microstructural properties and thermal conductivity of sodium-hydroxide-activated bricks. Environ. Prog. Sustain. Energy 37, 1647–1656 (2018)
M. Verma, N. Dev, Sodium hydroxide effect on the mechanical properties of fly ash-slag based geopolymer concrete. Struct. Concr. 22, 368–379 (2021)
Y. Rifaai, A. Yahia, A. Mostafa, S. Aggoun, E.-H. Kadri, Rheology of fly ash-based geopolymer: effect of NaOH concentration. Constr. Build. Mater. 223, 583–594 (2019)
H. Xu, J.S.J. van Deventer, The effect of alkali metals on the formation of geopolymeric gels from alkali-feldspars. Colloids Surf. A Physicochem. Eng. Aspects 216, 27–44 (2003)
C.Y. Heah, H. Kamarudin, A.M. Mustafa Al Bakri, M. Bnhussain, M. Luqman, I. Khairul Nizar, C.M. Ruzaidi, Y.M. Liew, Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers. Constr. Build. Mater. 35, 912–922 (2012)
S.A. Bernal, J.L. Provis, V. Rose, R.M.D. Gutierrez, Evolution of binder structure in sodium silicate-activated slag-metakaolin blends. Cem. Concr. Compos. 33, 46–54 (2011)
G. Trtnik, M. Gams, Recent advances of ultrasonic testing of cement based materials at early ages. Ultrasonics 54, 66–75 (2014)
C.R. Kaze, P.N. Lemougna, T. Alomayri, H. Assaedi, A. Adesina, S.K. Das, G.-L. Lecomte-Nana, E. Kamseu, U.C. Melo, C. Leonelli, Characterization and performance evaluation of laterite based geopolymer binder cured at different temperatures. Constr. Build. Mater. 270, 121443 (2021)
D. Mikulic, D. Sekulic, N. Štirmer, D. Bjegovic, Application of ultrasonic methods for early age concrete characterization. In application of contemporary non-destructive testing in engineering, Proceedings of the 8th International Conference of the Slovenian Society for Non-Destructive Testing, Portorož, Slovenia, 1–3 September 2005; Grum, J., Ed.; Slovenian Society for Non-Destructive Tests: Portorož, Slovenia, (2005) pp. 99–108.
S. Zhang, Y. Zhang, Z. Li, Ultrasonic monitoring of setting and hardening of slag blended cement under different curing temperatures by using embedded piezoelectric transducers. Constr. Build. Mater. 159, 553–560 (2018)
N. Robeyst, E. Gruyaert, C.U. Grosse, N. De Belie, Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity. Cem. Concr. Res. 38, 1169–1176 (2008)
D.G. Aggelis, T.P. Philippidis, Ultrasonic wave dispersion and attenuation in fresh mortar. NDT E Int. 37, 617–631 (2004)
W. Zhang, Y. Zhang, L. Liu, G. Zhang, Z. Liu, Investigation of the influence of curing temperature and silica fume content on setting and hardening process of the blended cement paste by an improved ultrasonic apparatus. Constr. Build. Mater. 33, 32–40 (2012)
A. Tutal, S. Partschefeld, J. Schneider, A. Osburg, Effects of bio-based plasticizers, made from starch, on the properties of fresh and hardened metakaolin-geopolymer mortar: basic investigations. Clays Clay Miner. 68, 413–427 (2020)
R. Cao, S. Zhang, N. Banthia, Y. Zhang, Z. Zhang, Interpreting the early-age reaction process of alkali-activated slag by using combined embedded ultrasonic measurement, thermal analysis, XRD, FTIR and SEM. Compos. Part B Eng. 186, 107840 (2020)
M. Izquierdo, X. Querol, C. Phillipart, D. Antenucci, M. Towler, The role of open and closed curing conditions on the leaching properties of fly ash-slag- based geopolymes. J. Hazard. Mater. 176, 623–628 (2010)
B. Mehdikhani, B.S. Razavi, J. Ahmadi, A. Goharrokhi, The effect of adding nano-silica on the ultrasonic pulse velocity of geopolymer concrete. J. Part. Sci. Technol. 7, 99–105 (2021)
J.L. Provis, P. Duxson, J.S.J. Van Deventer, G.C. Lukey, The role of mathematical modelling and gel chemistry in advancing geopolymer technology. Chem. Eng. Res. Des. 83, 853–860 (2005)
M.L. Cao, L. Xu, C. Zhang, Effect of calcium carbonate whisker on rheological properties of cement mortar under different water cement ratio and sand cement ratio. J. Chin. Ceram. Soc. 44, 456–461 (2016)
J. He, C. Cheng, X. Zhu, X. Li, Effect of silica fume on the rheological properties of cement paste with ultra-low water binder ratio. Mater 15, 554 (2022)
R.F. Eirich, Rheology Theory and Applications (Academic, New York and London, 1960), pp.205–248
H.A. Barners, J.F. Hutton, K. Walters, An Introduction to Rheology (Elsevier Science, Amsterdam, 1989), pp.115–139
J. Ferguson, Z. Kemblowski, Applied Fluid Rheology (Elsevier Applied Science, London and New York, 1991), pp.199–231
C.R. Kaze, A. Adesina, G.L. Lecomte-Nana, T. Alomayri, E. Kamseu, U.C. Melo, Alkali-activated laterite binders: influence of silica modulus on setting time, rheological behaviour and strength development. Clean. Eng. Technol. 4, 100175 (2021)
Acknowledgements
Pr. Dr Hervé Tchakouté Kouamo gratefully acknowledges Alexander von Humboldt-Stiftung for financial support for this work under the grant N° KAM/1155741 GFHERMES-P. Authors gratefully acknowledge Miss Bewa Nobouassia Christelle for the Pore solutions, Ultrasonic pulse velocity, Isothermal calorimetry and Rheological properties characterisations.
Funding
This study was supported by Alexander von Humboldt-Stiftung, N° KAM/1155741 GFHERMES-P.
Author information
Authors and Affiliations
Contributions
HKT: Conceptualization, Formal analysis, Funding acquisition, Investigation, Methodology, Resources, Writing-original draft, Writing-review and editing. ELH: Methodology, Formal analysis, data curation AMNM: Methodology, Data curation CHR: Project administration, Formal analysis, Resources, Supervision, Validation, Visualization, Data curation.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Hseumou, E.L., Moudio, A.M.N., Tchakouté, H.K. et al. Investigation of the Compressive Strength, Ultrasonic Pulse Velocity, Calorimetric, Microstructural and Rheological Properties of the Calcined Laterite-Based Geopolymer Materials. J Inorg Organomet Polym 34, 979–998 (2024). https://doi.org/10.1007/s10904-023-02869-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10904-023-02869-5