Abstract
Novel processes for treating industrial wastewater containing metals are needed nowadays in order to meet environmentally safe water treatment standards. Attention has been paid to innovative adsorbents that permit to trap and subsequently desorb ions, permitting their selective recovery. In this work, we design a robust porous exchange matrix able to adsorb Cu (II) (often found in industrial wastewater), that meets the following requirements: (a) to perform copper desorption with a minimum condition modification, (b) to preconcentrate already desorbed ions, (c) to be reusable, and (d) to be able to work in flow condition. A hybrid mesoporous material matrix (HMM) composed of a hybrid mesoporous filler embedded into a highly accessible polymer was chosen as adsorbent. The mesoporous filler is mesoporous silica (SBA-15) chemically modified through post-grafting with amino groups. The composite material was prepared by combining the adsorbent material and polyacrylonitrile (PAN). The system could be easily processed in columns of fixed bed in order to perform copper adsorption–desorption. Under these conditions, a Cu (II) loading of 1.2 × 10−3 mol per gram of adsorbent material was obtained. Copper desorption was performed in HCl 0.1 M, achieving a final concentration at least 5 times higher than the initial one. The material was reused 10 times without losing its adsorption capacity, demonstrating its potentiality for water treatment.
Similar content being viewed by others
References
R. Das, C.D. Vecitis, A. Schulze, B. Cao, A.F. Ismail, X. Lu, J. Chen, S. Ramakrishna, Chem. Soc. Rev. 46, 6946–7020 (2017)
S.A. Al-Saydeh, M. El-Naas, J. Zaidi, J. Ind. Eng. Chem. 56, 35–44 (2017)
S. Babel, T.A. Kurniawan, J. Hazard. Mater. 97, 219–243 (2003)
E. Chmielewská, in Handbook of Natural Zeolites, ed. by V.J. Inglezakis, A.A. Zorpas (Bentham Science, Oak Park, 2012), pp. 436–452
E. Dana, A. Sayari, Chem. Eng. J. 167, 91–98 (2011)
M.V. Lombardo, M. Videla, A. Calvo, F.G. Requejo, G.J.A.A. Soler-Illia, J. Hazard. Mater. 223–224, 53–62 (2012)
A.V. Bordoni, M.V. Lombardo, A.E. Regazzoni, G.J.A.A. Soler-Illia, A. Wolosiuk, J. Colloid Interface Sci. 450, 316–324 (2015)
L. Nicole, C. Boissière, D. Grosso, A. Quach, C. Sanchez, J. Mater. Chem. 15, 3598–3627 (2005)
D. Zhao, Y. Wan, W. Zhou, Ordered Mesoporous Materials (Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2013)
B. Lebeau, F. Gaslain, C. Fernandez-Martin, F. Babonneau, in Ordered Porous Solids, ed. by V. Valtchev, S. Mintova, M. Tsapatsis (Elsevier, New York, 2009), pp. 283–308
C. Luo, J. Wang, P. Jia, Y. Liu, J. An, B. Cao, K. Pan, Chem. Eng. J. 262, 775–784 (2015)
E. Da’na, Microporous Mesoporous Mater. 247, 145–157 (2017)
M. Wiśniewska, M. Wawrzkiewicz, A. Wołowicz, O. Goncharuk, in Nanosized Oxides of Different Compositions as Adsorbents for Hazardous Substances Removal from Aqueous Solutions and Wastewaters, ed. by O. Fesenko, L. Yatsenko. Nanooptics, Nanophotonics, Nanostructures, and Their Applications. NANO 2017, Springer Proceedings in Physics, vol 210 (Springer, Cham, 2018)
A. Nilchi, S.R. Garmarodi, S.J. Darzi, J. Appl. Polym. Sci. 119, 3495–3503 (2011)
X. Zhang, S. Yang, B. Yu, Q. Tan, X. Zhang, H. Cong, Sci. Rep. 8, 1260 (2018)
C. Chen, F. Li, Z. Guo, X. Qu, J. Wang, J. Zhang, Colloids Surf. A 568, 334–344 (2019)
K.Z. Elwakeel, A.A. El-Bindary, E.Y. Kouta, E. Guibal, Chem. Eng. J. 332, 727–736 (2018)
Y. Park, Y.C. Lee, W.S. Shin, S.J. Choi, Chem. Eng. J. 162, 685–695 (2010)
F. Šebesta, J. Radioanal. Nucl. Chem. 220, 77–88 (1997)
E. Da’na, A. Sayari, Desalination 277, 54–60 (2011)
T. Callan, J.A.R. Henderson, The Analyst 54, 650–653 (1929)
S. Lowell, J.E. Shields, M.A. Thomas, M. Thommes, Characterization of Porous Solids and Powders: Surface Area, Pore Size, and Density, 1st edn. (Springer, Netherlands, 2004), p. 120
P. Innocenzi, J. Non-Cryst. Solids 316, 309–319 (2003)
K.T.a.T.T. S. Kinugasa, http://sdbs.db.aist.go.jp/sdbs/cgi-bin/cre_index.cgi
G. Socrates, Infrared and Raman Characteristic Group Frequencies: Tables and Charts, 3rd edn. (Wiley, New York, 2001)
J.M. Rosenholm, M. Lindén, Chem. Mater. 19, 5023–5034 (2007)
A. Walcarius, L. Mercier, J. Mater. Chem. 20, 4478–4511 (2010)
J. Aguado, J.M. Arsuaga, A. Arencibia, M. Lindo, V. Gascón, J. Hazard. Mater. 163, 213–221 (2009)
M.V. Lombardo, M. Mirenda, A.V. Bordoni, A. Wolosiuk, A.E. Regazzoni, J. Colloid Interface Sci. 507, 139–144 (2017)
F. Rouquerol, J. Rouquerol, K. Sing, Adsorption by Powders and Porous Solids (Principles, Methodology and Applications, Elsevier, 1999)
I. Langmuir, J. Am. Chem. Soc. 40, 1361–1403 (1918)
S. Iftekhar, D.L. Ramasamy, V. Srivastava, M.B. Asif, M. Sillanpää, Chemosphere 204, 413–430 (2018)
E. Da’na, A. Sayari, Desalination 285, 62–67 (2012)
H. Yang, R. Xu, X. Xue, F. Li, G. Li, J. Hazard. Mater. 152, 690–698 (2008)
L. Bois, A. Bonhommé, A. Ribes, B. Pais, G. Raffin, F. Tessier, Colloids Surf. A 221, 221–230 (2003)
A. Sayari, S. Hamoudi, Y. Yang, Chem. Mater. 17, 212–216 (2005)
W. Stumm, J.J. Morgan, Aquatic Chemistry: Chemical Equilibria and Rates in Natural Waters, 3rd edn. (Wiley, New Yrok, 1995)
H. Irving, R.J.P. Williams, Nature 162, 746–747 (1948)
A.L.-T. Pham, D.L. Sedlak, F.M. Doyle, Appl. Catal. B 126, 258–264 (2012)
M. Etienne, A. Walcarius, Talanta 59, 1173–1188 (2003)
T. Ikegami, N. Tanaka, Annu. Rev. Anal. Chem. 2016(9), 317–342 (2016)
H.H. Someda, A.A. ElZahhar, M.K. Shehata, H.A. El-Naggar, Sep. Purif. Technol. 29, 53–61 (2002)
G. Zong, H. Chen, R. Qu, C. Wang, N. Ji, J. Hazard. Mater. 186, 614–621 (2011)
T. Usami, T. Itoh, H. Ohtani, S. Tsuge, Macromolecules 23, 2460–2465 (1990)
H. Faghihian, M. Iravani, M. Moayed, M. Ghannadi-Maragheh, Chem. Eng. J. 222, 41–48 (2013)
J.D. Law, R.S. Herbst, T.A. Todd, Sep. Sci. Technol. 37, 1353–1373 (2002)
A. Shahbazi, H. Younesi, A. Badiei, Chem. Eng. J. 168, 505–518 (2011)
M.A.S.D. Barros, P.A. Arroyo, E.A. Silva, General aspects of aqueous sorption process in fixed beds, in Mass Transfer—Advances in Sustainable Energy and Environment Oriented Numerical Modeling, ed. by H. Nakajima (InTech, Rijeka, 2013), p. Ch. 14
A. Heidari, H. Younesi, Z. Mehraban, Chem. Eng. J. 153, 70–79 (2009)
D. Bruhwiler, Nanoscale 2, 887–892 (2010)
J. Kobler, K. Möller, T. Bein, ACS Nano 2, 791–799 (2008)
A.V. Bordoni, M.V. Lombardo, A. Wolosiuk, RSC Adv. 6, 77410–77426 (2016)
Acknowledgements
Authors thank ABTLUS for funding access to the LNLS synchrotron facility (proposal D11A-SAXS1-13405). Work funded by ANPCyT (PICT 2012-2087, 2015-3516, FONARSEC FSNANO 2010/007). MVL thanks CONICET and Rhein Chemie Argentina for a graduate student fellowship. Authors thank Dr. M.C. Marchi for her assistance in SEM measurements, and Dr. Paula C. Angelomé for her valuable support to this work.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic Supplementary Material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Lombardo, M.V., Soler-Illia, G.J.A.A. Polyacrylonitrile and Hybrid SBA-15: A Robust Composite Material for Use as Copper (II) Adsorbent in Flow Conditions. J Inorg Organomet Polym 30, 1206–1217 (2020). https://doi.org/10.1007/s10904-019-01291-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10904-019-01291-0