Abstract
The proper fuse selection is of great importance for the safety and reliability operation of the PF converter. This paper mainly presents the high speed fuse selection analysis of the PF converter module, combining with the characteristics of the fuse and thyristor, the normal operating condition and the possible worse fault cases of the PF converter are analysed in details, and the proper type of the high speed fuse is chosen and used in the PF converter module prototype, the relevant tests of the selected fuse are done to verify the selection. The test results indicate that the fuse selection can meet the design requirements of the PF converter module.
Similar content being viewed by others
References
P. Fu, G. Gao et al., Preliminary design of the poloidal field AC/DC converter system for the ITER coil power supply. Fusion Sci. Technol. 64(4), 741–747 (2013)
P.L. Mondino et al., ITER R&D: auxiliary systems: coil power supply components. Fusion Eng. Des. 55, 325–330 (2001)
P. Fu, G. Gao, et al., Review and analysis of the ac/dc converter of ITER coil power supply. Proc. Appl. Power Electron. Conf. IEEE. Palm Spring, CA, USA, pp. 1810–1816 (2010)
J. Tao, I. Benfatto, J.K. Goff, et al., ITER Coil power supply and distribution system. Fusion engineering (SOFE), IEEE/NPSS 24th symposium, Chicago, IL, USA. IEEE, New York (2011)
E.T. Schonholzer, Ind. Appl. IEEE Trans. IA-8, 301–309 (1972)
J.C. Li, R&D of TER PF AC/DC converter module (University of Chinese Academy of Sciences, Beijing, 2012)
S. Li, Z. Song, M. Zhang, L. Xu, J. Li, P. Fu, M. Wang, L. Dong, Finite element method applied to fuse protection design. Plasma. Sci. Technol. 16(3), 294–299 (2014)
W. Yan, Data sheet 12 URD 284 PLAF 3000 A. Shanghai, Mersen Shanghai Co., Ltd, Document number: 140005501 A (1998)
R. Simon, Phase control thyristor 5STP 52U5200. Lenzburg, ABB Switzerland Ltd Semiconductors, Document number: 5SYA1042-05 Jan. 11 (2002)
Fuse breaking-capacity tests report, ABB Switzerland Ltd., High Power Laboratory, Baden, report number: HASH 641457 E (2013)
Acknowledgments
The authors would like to express the gratitude to the engineers from Mersen (Shanghai) Company and our colleagues for their supports and help.
Author information
Authors and Affiliations
Corresponding author
Additional information
The view and opinion expressed herein does not necessarily reflect those of the ITER organization.
Rights and permissions
About this article
Cite this article
Song, Z., Li, J., Fu, P. et al. High Speed Fuse Selection Analysis for ITER Poloidal Field Converter Module. J Fusion Energ 34, 305–314 (2015). https://doi.org/10.1007/s10894-014-9802-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10894-014-9802-6