Remote control of electric motors of mechanism drives from a control panel in automatic, semi-automatic, and manual modes of operation, as well as local start and stop of electric motors for repair or removal of automatic locking are considered. The instrumentation and automatic devices used must provide blocking, control, and signaling of the operation of electrical equipment, levels of product filling of bunkers and heat and mass exchangers, temperature of the drying agent, moisture content of the dried material, indication of the position of valves and slide gates, operation of the furnace and the condition of its fuel- and air-supply systems.
Similar content being viewed by others
References
N. V. Ostapchuk, Fundamentals of Mathematical Simulation of Food Production Processes [in Russian], 2nd rev. and enlarged edn., Vishcha Shkola, Kiev (1991).
A. V. Luikov and Yu. A. Mikhailov, Heat and Mass Transfer Theory [in Russian], Gosénergoizdat, Moscow (1963).
A. S. Ginzburg, Theoretical and Technological Principles of Drying of Foodstuffs [in Russian], Pishchevaya Promyshlennost′, Moscow (1973).
A. A. Gukhman, Application of the Similarity Theory to the Study of Processes of Heat and Mass Transfer [in Russian], Vysshaya Shkola, Moscow (1967).
I. Babushka, E. Vitásek, and M. Práger, Numerical Processes in Differential Equations [Russian translation], Mir, Moscow (1969).
W. Kast, O. Krischer, H. Reinicke, and K. Wintermantel, Konvektive Wärme- und Stoffübertragung [Russian translation], Énergiya, Moscow (1980).
J. M. Ortega and W. Rheinboldt, Iterative Solution of Nonlinear Equations in Several Variables [Russian translation], I. V. Konoval′tsev (Ed.), Mir, Moscow (1975).
J. M. Ortega, Introduction to Parallel and Vector Solution of Linear Systems [Russian translation], Kh. D. Ikramov (Ed.), Mir, Moscow (1991).
K. A. Pupkov, V. N. Kapalin, and A. S. Yushchenko, Functional Series in the Theory of Nonlinear Systems [in Russian], Nauka, Moscow (1976).
M. I. Rabinovich and D. I. Trubetskov, Introduction to the Theory of Oscillations and Waves [in Russian], Nauka, Moscow (1984).
P. M. Matyakubova, G. G. Boboev, M. M. Mahmudjonov, and D. U. Shokirov, The role of metrological supply in enterprises, AIP Conf. Proc., 2432, Article ID 030042 (2022).
N. S. Dubrov, E. S. Krichevskii, and B. I. Nevzlin, Multiparametric Moisture Meters for Loose Materials [in Russian], Mashinostroenie, Moscow (1980).
Yu. V. Novikov, O. A. Kalashnikov, and S. É. Gulyaev, Development of Conjugation Devices for a Personal Computer of an IBM PC Type [in Russian] (Yu. V. Novikov, Gen. Ed.), ÉKOM, Moscow (1997).
A. A. Begunov, P. R. Ismatullaev, and G. I. Ikramov, Measurements in Technological Industries [in Russian], Izd. "MEKhNAT," Tashkent (1999).
N. R. Yusupbekov and P. M. Matyakubova, Development of an automated process control system of grain drying process, Khim. Khim. Tekhnol., No. 2, 72–75 (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 96, No. 6, pp. 1663–1668, November–December, 2023
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Matyakubova, P.M., Ismatullaev, P.R., Avezova, N.I. et al. Block Diagram of APCS of Installations for Wet-Heat Processing of Grain Products. J Eng Phys Thermophy 96, 1652–1657 (2023). https://doi.org/10.1007/s10891-023-02835-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-023-02835-5