A numerical calculation of the heat and mass transfer and the strained state of sanitaryware in the process of its drying in a convection drier is presented. The problem on the convection drying of this ware was solved in the three-dimensional formulation with the use of the ANSYS program complex, allowing one to construct visual threedimensional geometric models of objects.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
B. V. Deryagin, N. V. Churaev, and V. M. Muller, Surface Forces [in Russian], Nauka, Moscow (1985).
N. V. Churaev, Physical Chemistry of Mass Transfer in Porous Bodies [in Russian], Khimiya, Moscow (1990).
A. V. Luikov, Theory of Drying [in Russian], Énergiya, Moscow (1968).
W. Kang and N.-H. Lee, Mathematical modeling to predict drying deformation and stress due to the differential shrinkage within a tree disk, Wood Sci. Technol., 36, 463–476 (2002).
W. Kang et al., Simple analytical methods to one- and two-dimensional drying stresses and deformations in lumber, Wood Sci. Technol., 38, 417–428 (2004).
P. V. Akulich and K. E. Militser, Simulation of nonisothermal moisture transfer and stresses in wood in drying, J. Eng. Phys. Thermophys., 71, No. 3, 398–406 (1998).
D. Martinović, I. Horman, and I. Demirdžić, Numerical and experimental analysis of a wood drying process, Wood Sci. Technol., 35, 143–156 (2001).
Y. Itaya et al., Three-dimensional heat and moisture transfer with viscoelastic strain–stress formation in composite food during drying, Int. J. Heat Mass Transf., 38, No. 7, 1173–1185 (1995).
M. Izumi and K.-I. Hayakawa, Heat and moisture transfer and hygrostress crack formation and propagation in cylindrical, elastoplastic food, Int. J. Heat Mass Transf., 38, No. 6, 1033–1041 (1995).
T. Inazu et al., Stress and crack prediction during drying of Japanese noodle (udon), Int. J. Food Sci. Technol., 40, 621–630 (2005).
S. Chemkhi et al., Modeling and simulation of drying phenomena with rheological behavior, Braz. J. Chem. Eng., 22, No. 2, 153–163 (2005).
C.-C. Jia et al., A study of rice fi ssuring by fi nite-element simulation of internal stresses combined with high-speed microscopy imaging of fi ssure appearance, Trans. ASAE, 45, No. 3, 741–749 (2002).
N. I. Nikitenko, Yu. F. Snezhkin, and N. N. Sorokovaya, Mathematical simulation of heat and mass transfer, phase conversions, and shrinkage for optimization of the process of drying of thermolabile materials, J. Eng. Phys. Thermophys., 78, No. 1, 75–89 (2005).
J.-M. Collard et al., The drying-induced deformations of a clay plate, Int. J. Heat Mass Transf., 35, No. 5, 1103–1114 (1992).
S. J. Kowalski and K. Rajewska, Drying-induced stresses in elastic and viscoelastic saturated materials, Chem. Eng. Sci., 57, 3883–3892 (2002).
K. Murugesan et al., Study of shrinkage stresses for drying of brick as a conjugate problem, Int. J. Numer. Methods Eng., 48, 37–53 (2000).
V. A. Sychevskii and T. A. Baranova, Numerical simulation of the aerodynamics of a wood-drying chamber, in: Heat and Mass Transfer–2014, ITMO NANB, Minsk (2015), pp. 66–73.
V. A. Sychevskii, A. D. Chornyi, and T. A. Baranova, Optimization of the aerodynamic regime of operation of a drying chamber, Izv. Vysssh. Uchebn. Zaved. Énerg. Ob’ed. SNG, Énergetika, 59, No. 3, 260–271 (2016).
V. A. Sychevskii, Heat and mass transfer in convective wood-drying plants, J. Eng. Phys. Thermophys., 91, No. 3, 705–711 (2018).
V. A. Sychevskii, Simulation of the technological process of convection drying of lumbers, Vestn. NAN Belarusi, Ser. Fiz.-Tekh. Nauk, 63, No. 4, 424–434 (2018).
V. A. Sychevskii, Temperature and moisture stresses in a lumber in the process of its high-temperature drying, in: Heat and Mass Transfer–2017, ITMO NAN Belarusi, Minsk (2017), pp. 71–82.
V. A. Sychevskii, Stresses and deformations in a lumber pile in the process of its drying in a convection drier, in: Heat and Mass Transfer–2017, ITMO NAN Belarusi, Minsk (2018), pp. 69–74.
V. A. Sychevskii, Stresses in a lumber pile in the process of drying in a convection drier, J. Eng. Phys. Thermophys., 93, No. 4, 973–979 (2020)
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 94, No. 1, pp. 262–269, January–February, 2021.
Rights and permissions
About this article
Cite this article
Sychevskii, V.A. Calculation of the Heat and Mass Transfer and the Strained State of Sanitaryware in the Process of Its Convection Drying. J Eng Phys Thermophy 94, 254–260 (2021). https://doi.org/10.1007/s10891-021-02294-w
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-021-02294-w