An investigation is made of the specific features of compaction of thin layers consisting of monodisperse calibrated solid balls that model a bidisperse powder mixture of large metallic and fine nonmetallic particles used for fabricating layer-by-layer compressed long-measuring blanks intended for the production of high-melting materials by the method of self-propagating high-temperature synthesis. Consideration is given to the case of one-sided axial compression of thin layers of balls in a matrix of hexagonal cross section at the ratio of the cross-sectional dimension of the matrix to the ball diameter equal to L/d ≈ 15.
Similar content being viewed by others
References
I. P. Borovinskaya, Regulation of the composition, structure, and properties of SHS products, in: The Concept of Development of SHS as of the Field of Scientific-Technical Progress [in Russian], Territoriya, Chernogolovka (2003), pp. 139–142.
A. S. Maznoi and A. I. Kirdyashkin, Infl uence of initial parameters of reacting systems on the porosity structure of self-propagating high-temperature synthesis products, Combust. Explos. Shock Waves, 50, No. 1, 60–67 (2014).
V. G. Prokof′ev and V. K. Smolyakov, Formation of the macrostructure of the product in a nonstationary SHS process, Vestn. Tomsk. Gos. Univ., No. 3, 103–114 (2012).
D. I. Andriyanov, A. P. Amosov, and A. R. Samboruk, Influence of granulation of powder charge of titanium-boron on regularities of self-propagating high-temperature synthesis of porous material, Key Eng. Mater., 685, 500–504 (2016).
A. S. Maznoi, A. I. Kirdyashkin, and Yu. M. Maksimov, On the influence of the size of particles of powder reagents on the morphology of porosity of SHS materials, Izv. Vyssh. Uchebn. Zaved., Fizika, 52, No. 12/2, 68–73 (2009).
A. S. Rogachev and A. S. Mukas′yan, Experimental verification of discrete models for combustion of microheterogeneous compositions forming condensed combustion products (Review), Combust. Explos. Shock Waves, 51, No. 1, 53–62 (2015).
M. A. Ponomarev and Yu. A. Sapronov, Fabrication of titanium carbide and diboride specimens by the method of self-propagating high-temperature synthesis for plasma-arc growth of single crystals, Refractor. Indust. Ceramics, 40, Nos. 9–10, 381–386 (1999).
M. A. Ponomarev and A. S. Shteinberg, Periodic character of the density–charge mass relationship in pressing thin layers of some powders, J. Eng. Phys. Thermophys., 63, No. 5, 1151–1156 (1992).
M. A. Ponomarev, Structure formation in thin layers of powders subjected to compaction, Fizich. Mezomekh., 13, No. 2, 103–110 (2010).
M. A. Ponomarev, V. É. Loryan, and A. G. Merzhanov, Specific features of structure formation in mixtures of spherical particles of titanium with boron subjected to pressing, Fiz. Mezomekh., 15, No. 5, 85–90 (2012).
M. A. Gol′dshtik, Transfer Processes in a Granular Bed [in Russian], Inst. Teplofiz. SO RAN, Novosibirsk (2005).
K. Rogers, Packings and Coatings [Russian translation], Mir, Moscow (1968).
M. É. Aérov, O. M. Todes, and D. A. Narinskii, Stationary Granular-Bed Apparatuses. Hydraulic and Thermal Principles of Operation [in Russian], Khimiya, Leningrad (1979).
M. A. Ponomarev and V. E. Loryan, Self-ordering of balls in compressed thin layers, Int. J. Self-Propag. High-Temp. Synth., 25, No. 1, 43–49 (2016).
M. A. Ponomarev, V. E. Loryan, and I. P. Borovinskaya, Structure formation in thin layers of balls at axial compaction. II. Matrix of square section, in: Proc. XIII Int. Symp. on Self-Propagating High-Temperature Synthesis, October 12–15, 2015, Antalya (2015), pp.175–176.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 92, No. 3, pp. 800–808, May–June, 2019.
Rights and permissions
About this article
Cite this article
Ponomarev, M.A., Loryan, V.É. Modeling of Structure Formation in Mixtures Using the Method of Self-Propagating High-Temperature Synthesis. J Eng Phys Thermophy 92, 774–782 (2019). https://doi.org/10.1007/s10891-019-01993-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-019-01993-9