A physicomathematical model and a procedure of calculation of the basic indices of axial chemical inhomogeneity in continuously-cast steel billets have been developed. The influence of the processes of convective transfer in the two-phase zone of the alloy on the occurrence and development of axial chemical inhomogeneity has been shown.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
I. B. Kumanin and L. G. Matvienko, On zonal liquation in profiled castings, Izv. Vyssh. Uchebn. Zaved., Chern. Metallurg., No. 7, 170–174 (1966).
I. B. Kumanin, The Problems of Theory of Foundry Processes [in Russian], Mashinostroenie, Moscow (1976).
M. C. Flemings, Solidification Processes [Russian translation], Mir, Moscow (1967).
H. D. Brody and M. C. Flemings, Solute redistribution in dendritic solidification, Trans. Met. Soc. AIME, 236, 615–624 (1966).
A. A. Ryzhikov, M. I. Roshchin, and R. D. Uglanova, Characteristic features of the formation of off-center liquation inhomogeneity in steel ingots, Liteinoe Proizvodstvo, No. 12, 12–14 (1976).
Yu. D. Smirnov, On the nature of chemical heterogeneity of steel castings, Probl. Stal. Slitka, 7, 62–70 (1978).
Yu. A. Samoilovich and V. I. Timoshpols’kii, Analysis of the axial chemical heterogeneity of continuously cast steel blanks, Lit’e Metallurgiya, No. 4, 73–80 (2005).
A. I. Veinik, Calculation of Casting [in Russian], Mashinostroenie, Moscow (1964).
Yu. A. Samoilovich, S. A. Krulevetskii, V. A. Goryainov, and Z. K. Kabakov (Yu. A. Samoilovich Ed.), Thermal Processes in Continuous Casting of Steel [in Russian], Metallurgiya, Moscow (1982).
Yu. A. Samoilovich, V. I. Timoshpols’kii, I. A. Trusova, and V. V. Filippov (Yu. A. Samoilovich and V. I. Timoshpols’kii Eds.), Solidification and Cooling Steel Ingot [in Russian], in 3 vols., Belorusskaya Nauka, Minsk (2000).
Yu. A. Samoilovich, V. I. Timoshpols’kii, I. A. Trusova, et al., Two-phase state of a melt in continuous casting of high-carbon steel, Lit’e Metallurgiya, No. 1, 23–28 (2003).
V. M. Parshin and E. A. Kazantsev, Characteristic features of the structure of continuously-cast ingots with a large rectangular cross section, Izv. Vyssh. Uchebn. Zaved., Chern. Metallurg., No. 11, 43–47 (1987).
Author information
Authors and Affiliations
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 82, No. 2, pp. 385–390, March–April, 2009.
Rights and permissions
About this article
Cite this article
Samoilovich, Y.A., Timoshpol’skii, V.I. & Kabishov, S.M. Procedure of calculation of the axial chemical inhomogeneity of solidifying steel ingots. J Eng Phys Thermophy 82, 382–387 (2009). https://doi.org/10.1007/s10891-009-0183-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-009-0183-z