Abstract
The influence of the laser-processing parameters on the adhesion strength of the Fe-Cr-B-Si-system coating has been investigated. The characteristics of a change in the adhesion strength of coatings, as well as in the amounts of iron borides as functions of the velocity of travel, diameter of a laser beam, and coefficient of overdropping have been studied.
Similar content being viewed by others
References
V. P. Larionov, N. P. Bolotina, T. V. Argunova, V. D. Tyunin, and N. P. Lebedev, Influence of laser processing on the structure and composition of plasma-sprayed coatings of the Ni-Cr-B-Si-C system, Fiz. Khim. Obrab. Mater., No. 1, 74–78 (1987).
I. M. Spiridonova, Structure and properties of iron-boron-carbon alloys, Metalloved. Term. Obrab. Met., No. 2, 58–61 (1984).
P. A. Vityaz’, V. S. Ivashko, A. F. Il’yushchenko, et al., Theory and Practice of Applying Protective Coatings [in Russian], Belaruskaya Navuka, Minsk (1998).
V. S. Ivashko, I. A. Kupriyanov, and A. I. Shevtsov, Electrothermal Technology of Applying Protective Coatings [in Russian], Navuka i Tékhnika, Minsk (1996).
F. S. Novik, Mathematical Methods of Planning Experiments in Metal Science. Planning of Industrial Experiments [in Russian], Mashinostroenie, Moscow (1971).
L. I. Grechikhin, N. V. Spiridonov, A. G. Vasilenko, M. A. Kardapolova, and O. G. Devoino, Enhancement of the adhesive bond of laser radiation-fused gas thermal coatings, Fiz. Khim. Obrab. Mater., No. 3, 76–81 (1990).
M. S. Trezno and E. V. Moskalev, Adhesives and Gluing [in Russian], Leningrad, Khimiya (1980).
Author information
Authors and Affiliations
Additional information
__________
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 79, No. 6, pp. 155–159, November–December, 2006.
Rights and permissions
About this article
Cite this article
Dorozhkin, N.N., Kardapolova, M.A. & D’yachenko, O.V. Influence of the laser-processing parameters on the adhesion strength of adhesive Fe-Cr-B-Si-system coatings. J Eng Phys Thermophys 79, 1208–1213 (2006). https://doi.org/10.1007/s10891-006-0224-9
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/s10891-006-0224-9