Abstract
The purpose is to design and manufacture a composite mandible replicate suitable for testing the influence of prosthetic materials on the stress distribution of bone. Composite mandibles made of a poly(methylmethacrylate) core and a glass reinforced outer shell are manufactured and characterised through mechanical tests assisted by the finite element analysis. The mandible replicate has been conveniently equipped with strain gauges, moreover a video extensometer has also been used in order to measure the arch width change during loading.
A close agreement is found between the experimental data and the theoretical predictions. By laterally loading the mandibles the maximum values of stress and strain take place in the premolar-incisal region.
By varying technological parameters such as the fiber volume fraction and orientation, it is easy to replicate the behaviour of mandibles having different stiffnesses. The results obtained by laterally loading the composite mandibles through the condyles or through the gonion regions are consistent with literature data relative to the arch width decrease of natural jaws during opening and closing. This novel synthetic system coupled with the Finite Element model constitutes an experimental-theoretical model suitable to investigate the biomechanical effects of oral rehabilitations on mandibular bone.
Similar content being viewed by others
References
H. PLENK, J. Biomed. Mater. Res. Part B: Appl. Biomat. 43 (1998) 350.
I. BALTAG, K. WATANABE, H. KUSAKARI, N. TAGUCHI, O. MIYAKAWA, M. KOBAYASHI and N. ITO, J. Biomed. Mater. Res. Part B: Appl. Biomat. 53 (2000) 76.
S. LEWIS, S. PAREL and R. FAULKER, Int. J. Oral. Maxillofac. Implants 10 (1995) 319.
T. M. WANG, L. J. LEU, J. WANG and L. D. LIN, Int. J. Oral. Maxillofac. Implants 17 (2002) 231.
C. L. SCHWARTZ-DABNEY and P. C. DECHOW, J. Dent. Res. 81 (2002) 613.
V. VITINS, M. DOBELIS, J. MIDDLETON, G. LIMBERT and I. KNETS, Comput. Methods Biomech. Biomed. Engng. 6 (2003) 299.
T. NOMURA, J. L. KATZ, M. P. POWERS and C. SAITO, J. Biomed. Mater. Res. Part B: Appl. Biomat. 73 (2005) 29.
S. LETTRY, B. B. SEEDHOM, E. BERRY and M. CUPPONE, Bone 32 (2003) 35.
T. HARA, M. TAKIZAWA, T. SATO and Y. IDE, Bull Tokyo Dent. Coll. 39 (1998) 47.
Y. TAMATSU, K. KAIMOTO, M. ARAI and Y. IDE, Bull Tokyo Dent. Coll. 37 (1996) 93.
A. M. O'MAHONY, J. L. WILLIAMS, J. O. KATZ and P. SPENCER, Clin. Oral. Impl. Res. 11 (2000) 415.
E. B. GIESEN, M. DING, M. DALSTRA and T. M. VAN EIJDEN, Clinical Biomechanics 18 (2003) 358.
S. S. KOHLES and D. A. MARTINEZ. J. Biomed. Mater. Res. 49 (2000) 479.
D. VOLLMER, U. MEYER, U. JOOS, A. VEGH and J. PIFFKO, Journal of Cranio-Maxillofacial Surgery 28 (2000) 91.
C. MEYER, J. L. KAHN, P. BOUTEMI and A. WILK, Journal of Cranio-Maxillofacial Surgery 30 (2002) 160.
D. RODRIGUEZ, V. MORENO, M. GALLAS, M. T. ABLEIRA and D. SUAREZ, Med. Eng. Phys. 26 (2004) 371.
R. T. HART, V. V. HENNEBEL, N. THONGPREDA, W. C. VANBUSKIRK and R. C. ANDERSON, J. Biomechanics 25 (1992) 261.
A. APICELLA, E. MASI, L. NICOLAIS, F. ZARONE, N. DE ROSA and G. VALLETTA, J. Mat. Sci.:Materials in Medicine 9 (1998) 191.
K. B. TAN and J. I. NICHOLLS, Int. J. Oral Maxillofac. Implants 17 (2002) 175.
J. A. PORTER JR, V. C. PETROPOULOS and J. B. BRUNSKI, Int. J. Oral Maxillofac. Implants 17 (2002) 651.
M. KARL, W. WINTER, T. D. TAYLOR and S. M. HECKMANN, Int. J. Oral Maxillofac. Implants 19 (2004) 30.
M. M. NACONECY, E. R. TEIXEIRA, R. S. SHINKAI, L. C. FRASCA and A. CERVIERI, Int. J. Oral Maxillofac. Implants 19 (2004) 192.
A. APICELLA, A. LIGUORI, E. MASI and L. NICOLAIS, in “Total hip replacement”. (Sheffield Academis Press, Sheffield, 1994) 323.
M. AKAY and N. ASLAN, J. Biomed. Mater. Res. 31 (1996) 167.
F. ZARONE, A. APICELLA, L. NICOLAIS, R. AVERSA and R. SORRENTINO, Clin. Or. Implants Res. 14 (2003) 103.
K. AKCA and H. IPLIKCIOGLU, Int. J. Oral Maxillofac. Implants 16 (2001) 722.
M. CRUZ, T. WASSALL, E. M. TOLEDO, L. P. BARRA and A. C. LEMONGE, Int. J. Oral Maxillofac. Implants 18 (2003) 675.
M. SUTPIDELER, S. E. ECKERT, M. ZOBITZ and K. N. AN, Int. J. Oral Maxillofac. Implants 19 (2004) 819.
R. HUISKES, J. D. JANSSEN and T. J. SLOFF, in “Mechanical properties of bone” (Cowin SC, ASME Editor, New York, 1981) p. 221.
R. DE SANTIS, D. PRISCO, A. APICELLA, L. AMBROSIO, S. RENGO and L. NICOLAIS, J. Mat. Sci.: Materials in Medicine 4 (2000) 201.
H. LINDSTROM and H. PREISKEL, Int. J. Oral. Maxillofac. Implants 16 (2001) 34.
E. BERRY, J. M. BROWN, M. CONNELL, C. M. CRAVEN, N. D. EFFORD, A. RADDJENOVIC and M. A. SMITH, Med. Eng. Phys. 19 (1997) 90.
P. S. D'URSO, T. M. BARKER, W. J. EARWAKER, L. J. BRUCE, R. L. ATKINSON, M. W. LANIGAN, J. F. ARVIER and D. J. EFFENEY, J. Craniomaxillofacial. Surg. 27 (1999) 30.
M. NAITOH, A. KATSUMATA, S. MITSUYA, H. KAMEMOTO and E. ARIJI, Int. J. Oral Maxillofac. Implants 19 (2004) 239.
J. A. HOBKIRK, Int. J. Oral Maxillofac. Implants 6 (1991) 319.
P. POTAMIANOS, A. A. AMIS, A. J. FORESTER, M. MCGURK and M. BIRCHER, Proc. Inst. Mech. Eng. H212 (1998) 383.
R. DE SANTIS, F. SARRACINO, F. MOLLICA, P. A. NETTI, L. AMBROSIO and L. NICOLAIS, Comp. Sci. Tech. 64 (2004) 861.
L. CRISTOFOLINI, M. VICECONTI, A. CAPPELLO and A. TONI, J. Biomechanics 29 (1996) 525.
G. LEWIS, J. Biomed. Mater. Res. Part B: Appl. Biomat. 38 (1997) 155.
C. E. MISCH, Z. QU and M. W. BIDEZ, J. Oral Maxillofacial Surg. 57 (1999) 700.
J. W. OSBORNE, Arch. Or. Biol. 40 (1995) 1099.
J. H. KOOLSTRA and T. M. G. J. VAN EIJDEN, J. Biomechanics 30 (1997) 883.
D. C. CHEN, Y. L. LAI, L. Y. CHI and S. Y. LEE, J. Dent. 28 (2000) 583.
S. RAMAKRISHNA, J. MAYER, E. WINTERMANTEL and K. W. LEONG, Comp. Sci. Tech. 1 (2001) 1189.
C. I. VALLO, J. Biomed. Mater. Res. Part B: Appl. Biomat. 53 (2000) 717.
F. ZHANG, C. C. PECK and A. G. HANNAM, J. Biomechanics 35 (2002) 975.
T. M. G. J. VAN EIJDEN, J. H. KOOLSTRA and P. BRUGMAN, J. Dent. Res. 74 (1995) 1489.
G. M. MURRAY, I. PHANACHET, M. HUPALO and K. WANIGARATNE, Arch. Or. Biol. 44 (1999) 671.
I. PHANACHET and G. M. MURRAY, Arch. Or. Biol. 45 (2000) 517.
J. H. KOOLSTRA and T. M. G. J. VAN EIJDEN, J. Dent. Res. 74 (1995) 1564.
I. PHANACHET, K. WANIGARATNE, T. WHITTLE, S. UCHIDA, S. PEECEEYEN and G. M. A. MURRAY, J. Neur. Meth. 105 (2001) 201.
J. H. KOOLSTRA, J. Dent. Res. 82 (2003) 672.
B. MAY, S. SAHA and M. SALTZMAN, Clin. Biomech. 16 (2001) 489.
G. E. J. LANGENBACH and A. G. HANNAM, Arch. Or. Biol. 44 (1999) 557.
C. C. PECK, G. E. J. LANGENBACH and A. G. HANNAM, Arch. Or. Biol. 45 (2000) 963.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
De Santis, R., Mollica, F., Esposito, R. et al. An experimental and theoretical composite model of the human mandible. J Mater Sci: Mater Med 16, 1191–1197 (2005). https://doi.org/10.1007/s10856-005-4728-1
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10856-005-4728-1