Abstract
In this study, the bonding reliability and characteristics of laser soldering and reflow soldering using a low-melting temperature Sn–58Bi solder/organic solderability preservative finished Cu joints were compared and analyzed. Because laser soldering uses high density energy, it enables faster and more localized soldering compared to conventional reflow soldering. As a result of laser soldering, thin and small intermetallic compounds (IMCs) were formed under the condition of applying lower energy, but thick and large IMCs were formed under the condition of applying higher energy. As the bonding time increased at the same laser power, a relatively thick and long Cu6Sn5 was formed at the interface. To evaluate long-term reliability, a high temperature storage test (HTST) was performed at 110 °C, and Cu3Sn IMC formation was observed at the interface after HTST for 100 h under all laser soldering conditions. After 2000 h of HTST, the shear strength tended to decrease and the thickness of the interfacial IMC tended to increase. Initially, ductile fracture occurred, and the brittle fracture proportion increased as the HTST time increased. The joints formed under the laser soldering condition showed relatively higher shear strength even after long-term heat treatment compared to the reflow soldering joints. From these results, it was confirmed that the laser soldering process is superior in terms of long-term reliability of Sn–58Bi/Cu joint compared to the reflow soldering process.
Similar content being viewed by others
Data availability
We have read and understood your journal’s policies and believe that neither the manuscript nor the study violates any of these.
References
R.S. Sidhu, R. Aspandiar, S. Vandervoort, D. Amir, G. Murtagian, Impact of processing conditions and solder materials on surface mount assembly defects. JOM 63, 47–51 (2011). https://doi.org/10.1007/s11837-011-0174-3
Z. Zhao, C. Chen, C.Y. Park, Y. Wang, L. Liu, G. Zou, Q. Wang, Effects of package warpage on head-in-pillow defect. Mater. Trans. 56, 1037–1042 (2015). https://doi.org/10.2320/matertrans.MI201404
D. Choudhury, in 2010 IEEE MTT-S International Microwave Symposium. 3D integration technologies for emerging microsystems, (IEEE, 2010), pp. 1–4
Z. Zhu, Y.C. Chan, F. Wu, Failure mechanisms of solder interconnects under current stressing in advanced electronic packages: an update on the effect of alternating current (AC) stressing. Microelectron. Reliab. 91, 179–182 (2018). https://doi.org/10.1016/j.microrel.2018.10.002
K.N. Tu, Y. Liu, M. Li, Effect of Joule heating and current crowding on electromigration in mobile technology. Appl. Phys. Rev. 4, 011101 (2017). https://doi.org/10.1063/1.4974168
H. Chen, J. Liang, R. Gao, Y. Li, Laser soldering of Sn-based solders with different melting points. In 2020 21st International Conference on Electronic Packaging Technology (2020), pp. 1–5
A. Kunwar, S. Shang, P. Råback, Y. Wang, J. Givernaud, J. Chen, N. Zhao, Heat and mass transfer effect of laser soldering on growth behavior of interfacial intermetallic compounds in Sn/Cu and Sn–3.5Ag0.5Cu/Cu joints. Microelectron. Reliab. 80, 55–67 (2018). https://doi.org/10.1016/j.microrel.2017.11.016
K. Rahim, A. Mian, A review on laser processing in electronic and MEMS packaging. J. Electron. Packag. (2017). https://doi.org/10.1115/1.4036239
H. Nishikawa, N. Iwata, Formation and growth of intermetallic compound layers at the interface during laser soldering using Sn–Ag Cu solder on a cu pad. J. Mater. Process Technol. 215, 6–11 (2015). https://doi.org/10.1016/j.jmatprotec.2014.08.007
L. An, H. Ma, L. Qu, J. Wang, J. Liu, M. Huang, in 2013 14th International Conference on Electronic Packaging Technology. The effect of laser-soldering parameters on the Sn–Ag–Cu/Cu interfacial reaction, (2013), pp. 264–267
C. Chaminade, E. Fogarassy, D. Boisselier, Diode laser soldering using a lead-free filler material for electronic packaging structures. Appl. Surf. Sci. 252, 4406–4410 (2006). https://doi.org/10.1016/j.apsusc.2005.07.095
F. Wang, D. Li, Z. Zhang, M. Wu, C. Yan, Improvement on interfacial structure and properties of Sn–58Bi/Cu joint using Sn–3.0Ag–0.5Cu solder as barrier. J. Mater. Sci.: Mater. Electron. 28, 19051–19060 (2017). https://doi.org/10.1007/s10854-017-7859-5
K. Suganuma, Advances in lead-free electronics soldering. Curr. Opin. Solid State Mater. Sci. 5, 55–64 (2001). https://doi.org/10.1016/S1359-0286(00)00036-X
H. Ma, J.C. Suhling, A review of mechanical properties of lead-free solders for electronic packaging. J. Mater. Sci. 44, 1141–1158 (2009). https://doi.org/10.1007/s10853-008-3125-9
D. Xie, D. Shangguan, D. Geiger, D. Gill, V. Vellppan, K. Chinniah, in 2009 59th Electronic Components and Technology Conference. Head in pillow (HIP) and yield study on SIP and PoP assembly, (IEEE, 2009), pp. 752–758
L.T. Chen, C.M. Chen, Electromigration study in the eutectic Sn–Bi solder joint on the Ni/Au metallization. J. Mater. Res. 21, 962–969 (2006). https://doi.org/10.1557/jmr.2006.0113
H.W. Miao, J.G. Duh, B.S. Chiou, Thermal cycling test in Sn–Bi and Sn–Bi–Cu solder joints. J. Mater. Sci.: Mater. Electron. 11, 609–618 (2000). https://doi.org/10.1023/A:1008928729212
C.J. Lee, K.D. Min, H.J. Park, S.B. Jung, Mechanical properties of Sn-58 wt% Bi solder containing Ag-decorated MWCNT with thermal aging tests. J. Alloys Compd. 820, 153077 (2020). https://doi.org/10.1016/j.jallcom.2019.153077
D. Ma, P. Wu, Improved microstructure and mechanical properties for Sn58Bi0.7Zn solder joint by addition of graphene nanosheets. J. Alloys Compd. 671, 127–136 (2016). https://doi.org/10.1016/j.jallcom.2016.02.093
Y. Ma, X. Li, W. Zhou, L. Yang, P. Wu, Reinforcement of graphene nanosheets on the microstructure and properties of Sn58Bi lead-free solder. Mater. Des. 113, 264–272 (2017). https://doi.org/10.1016/j.matdes.2016.10.034
S.M. Lee, J.W. Yoon, S.B. Jung, Board level drop reliability of epoxy-containing Sn-58 mass% Bi solder joints with various surface finishes. Mater. Trans. 57, 466–471 (2016). https://doi.org/10.2320/matertrans.M2015260
J.R. Teo, Y.F. Sun, Spalling behavior of interfacial intermetallic compounds in Pb-free solder joints subjected to temperature cycling loading. Acta Mater. 56, 242–249 (2008). https://doi.org/10.1016/j.actamat.2007.09.026
Y.J. Seo, M.H. Heo, E.C. Noh, J.W. Yoon, Comparative study of solder size and volume effect on properties of Sn–3.0Ag–0.5Cu joints during isothermal aging. J. Mater. Sci.: Mater. Electron. 34, 1318 (2023). https://doi.org/10.1007/s10854-023-10748-5
Acknowledgements
This work was supported by the National Research Foundation of Korea grant funded by the Korean government (MSIT) (No. 2021R1A2C1009714 and No. RS-2023-00247545).
Funding
This work was supported by the National Research Foundation of Korea grant funded by the Korean government (MSIT) (No. 2021R1A2C1009714 and No. RS-2023-00247545).
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by MSJ and JWY. The first draft of the manuscript was written by MSJ and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors have no relevant financial or non-financial interests to disclose.
Ethical approval
This manuscript has not been published or presented elsewhere in part or in its entirety and is not under consideration by another journal.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Jeong, MS., Heo, MH., Kim, J. et al. A comparative study of laser soldering and reflow soldering using Sn–58Bi solder/Cu joints. J Mater Sci: Mater Electron 34, 1960 (2023). https://doi.org/10.1007/s10854-023-11419-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10854-023-11419-1