Abstract
A structurally modified cathode material for Lithium ion battery is reported in this study. This study was based on first principle calculations to study the electronic, ionic, and diffusion properties of olivine phosphate family of cathode material. The attempt was made to modify the conventionally used cathode material LiFePO4 by substituting Rare earth Gd on Fe sites. The Gd-4f’s electrostatic interaction, exchange coupling, impact on lithium’s intercalation, and ability to modify the crystal structure upon doping in the crystalline environment of the host have been studied and discussed in detail. The calculations on electronic structure, charge transfer between atoms, Li intercalation voltage, electron localization function (ELF) analysis, steric interaction between Li ion and metal cation (Fe and Gd) in both LiFePO4 and LiGdPO4 were carried out using prescribed methods. This trend of intercalation is related to structural relaxation in the vicinity of Gd which expedites the Li ion mobility without compromising the structural stability of the material. The analysis of interatomic steric interactions and ELF analysis helped to visualize the interactions in the cathode material. The findings of this study revealed that LiGdPO4 could be a potential candidate for its use as cathode in lithium ion battery and relevant devices.
Similar content being viewed by others
References
P.G. Bruce, Energy storage beyond the horizon: rechargeable lithium batteries. Solid State Ionics 179(21–26), 752–760 (2008)
J.B. Goodenough, K.-S. Park, The Li-ion rechargeable battery: a perspective. J. Am. Chem. Soc. 135(4), 1167–1176 (2013)
M.M. Thackeray, C. Wolverton, E.D. Isaacs, Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries. Energy Environ. Sci. 5(7), 7854–7863 (2012)
C.A. Vincent, Lithium batteries: a 50-year perspective, 1959–2009. Solid State Ionics 134(1–2), 159–167 (2000)
T. Nagaura, Lithium ion rechargeable battery. Prog. Batter. Solar Cells 9, 209 (1990)
H.J. Bang et al., Contribution of the structural changes of LiNi0.8Co0.15Al0.05O2 cathodes on the exothermic reactions in Li-ion cells. J. Electrochem. Soc. 153(4), A731–A737 (2006)
N. Yabuuchi, T. Ohzuku, Lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries. in Meeting Abstracts. 2006. The Electrochemical Society
A.K. Padhi, K.S. Nanjundaswamy, J.B. Goodenough, Phospho-olivines as positive-electrode materials for rechargeable lithium batteries. J. Electrochem. Soc. 144(4), 1188–1194 (1997)
J. Li et al., A facile recycling and regeneration process for spent LiFePO4 batteries. J. Mater. Sci. 30(15), 14580–14588 (2019)
A. Jena, B. Nanda, Engineering diffusivity and operating voltage in lithium iron phosphate through transition-metal doping. Phys. Rev. Appl. 7(3), 034007 (2017)
H. Raj, A. Sil, PEDOT: pss coating on pristine and carbon coated LiFePO4 by one-step process: the study of electrochemical performance. J. Mater. Sci. 30(14), 13604–13616 (2019)
G. Li, H. Azuma, M. Tohda, LiMnPO4 as the cathode for lithium batteries. Electrochem. Solid State Lett. 5(6), A135–A137 (2002)
M. Yonemura et al., Comparative kinetic study of olivine Li x MPO 4 (M = Fe, Mn). J. Electrochem. Soc. 151(9), A1352–A1356 (2004)
J. Wolfenstine, J. Allen, Ni3+/Ni2+ redox potential in LiNiPO4. J. Power Sources 142(1–2), 389–390 (2005)
W. Li et al., Effect of rare earth ions doping on properties of LiFePO4/C cathode material. J. Rare Earths 32(9), 895–899 (2014)
P. Ghosh, S. Mahanty, R.N. Basu, Lanthanum-doped LiCoO2 cathode with high rate capability. Electrochim. Acta 54(5), 1654–1661 (2009)
Y. Ding et al., Effect of rare earth elements doping on structure and electrochemical properties of LiNi1/3Co1/3Mn1/3O2 for lithium-ion battery. Solid State Ionics 178(13–14), 967–971 (2007)
Y. Zhang et al., Ce-doped LiNi1/3Co(1/3 − x/3)Mn1/3Cex/3O2 cathode materials for use in lithium ion batteries. Chin. Sci. Bull. 57(32), 4181–4187 (2012)
A.M. Khedr, M.M. Abou-Sekkina, F.G. El-Metwaly, Synthesis, structure, and electrochemistry of Sm-modified LiMn2O4 cathode materials for lithium-ion batteries. J. Electron. Mater. 42(6), 1275–1281 (2013)
M. Helan, L.J. Berchmans, Synthesis of LiSm0.01Mn1.99O4 by molten salt technique. J. Rare Earths 28(2), 255–259 (2010)
F. Ning et al., Structural, electronic, and Li migration properties of RE-doped (RE = Ce, La) LiCoO2 for Li-ion batteries: a first-principles investigation. J. Phys. Chem. C 120(33), 18428–18434 (2016)
J.-K. Park, Principles and Applications of Lithium Secondary Batteries (Wiley, New Jersey, 2012)
V.I. Anisimov, F. Aryasetiawan, A. Lichtenstein, First-principles calculations of the electronic structure and spectra of strongly correlated systems: the LDA + U method. J. Phys. 9(4), 767 (1997)
M. Cococcioni, S. De Gironcoli, Linear response approach to the calculation of the effective interaction parameters in the LDA + U method. Phys. Rev. B 71(3), 035105 (2005)
F. Zhou et al., The electronic structure and band gap of LiFePO4 and LiMnPO4. Solid State Commun. 132(3), 181–186 (2004)
W. Setyawan, S. Curtarolo, High-throughput electronic band structure calculations: challenges and tools. Comput. Mater. Sci. 49(2), 299–312 (2010)
S. Hao, C. Wolverton, Lithium transport in amorphous Al2O3 and AlF3 for discovery of battery coatings. J. Phys. Chem. C 117(16), 8009–8013 (2013)
P. Zhai et al., Fischer–Tropsch synthesis nanostructured catalysts: understanding structural characteristics and catalytic reaction. Nanotechnol. Rev. 2(5), 547–576 (2013)
A. Jena, B. Nanda, Unconventional magnetism and band gap formation in LiFePO4: consequence of polyanion induced non-planarity. Scientific reports 6, 19573 (2016)
D. Wiedemann et al., Lithium diffusion pathways in 3R-Li x TiS2: a combined neutron diffraction and computational study. J. Phys. Chem. C 119(21), 11370–11381 (2015)
A.H. Reshak, Copper-intercalated TiS2: electrode materials for rechargeable batteries as future power resources. J. Phys. Chem. A 113(8), 1635–1645 (2009)
A.R. Armstrong, P.G. Bruce, Synthesis of layered LiMnO2 as an electrode for rechargeable lithium batteries. Nature 381(6582), 499 (1996)
M.M. Kalantarian, S. Asgari, P. Mustarelli, A theoretical approach to evaluate the rate capability of Li-ion battery cathode materials. J. Mater. Chem. A 2(1), 107–115 (2014)
Z. Liu, X. Huang, Structural, electronic and Li diffusion properties of LiFeSO4F. Solid State Ionics 181(25), 1209–1213 (2010)
S. Laubach et al., Changes in the crystal and electronic structure of LiCoO2 and LiNiO2 upon Li intercalation and de-intercalation. Phys. Chem. Chem. Phys. 11(17), 3278–3289 (2009)
M.S. Islam, R.A. Davies, J.D. Gale, Structural and electronic properties of the layered LiNi0.5Mn0.5O2 lithium battery material. Chem. Mater. 15(22), 4280–4286 (2003)
V. Anisimov et al., First-principles calculations of the electronic structure and spectra of strongly correlated systems: dynamical mean-field theory. J. Phys. 9(35), 7359 (1997)
M. Aydinol et al., Ab initio study of lithium intercalation in metal oxides and metal dichalcogenides. Phys. Rev. B 56(3), 1354 (1997)
Y.S. Meng, M.E. Arroyo-de Dompablo, First principles computational materials design for energy storage materials in lithium ion batteries. Energy Environ. Sci. 2(6), 589–609 (2009)
J. Bréger et al., Effect of high voltage on the structure and electrochemistry of LiNi0.5Mn0.5O2: a joint experimental and theoretical study. Chem. Mater. 18(20), 4768–4781 (2006)
C.C. Chang, J.Y. Kim, P.N. Kumta, Synthesis and electrochemical characterization of divalent cation-incorporated lithium nickel oxide. J. Electrochem. Soc. 147(5), 1722–1729 (2000)
C. Pouillerie et al., Effect of magnesium substitution on the cycling behavior of lithium nickel cobalt oxide. J. Power Sources 96(2), 293–302 (2001)
B. Chowdari, G.S. Rao, S. Chow, Cathodic behavior of (Co, Ti, Mg)-doped LiNiO2. Solid State Ionics 140(1–2), 55–62 (2001)
M.Y. Song, R. Lee, I. Kwon, Synthesis by sol–gel method and electrochemical properties of LiNi1 − yAlyO2 cathode materials for lithium secondary battery. Solid State Ionics 156(3–4), 319–328 (2003)
S.-H. Kang et al., Layered Li (Ni0.5 − xMn0.5 − xM2x′) O2 (M′ = Co, Al, Ti; x = 0, 0.025) cathode materials for Li-ion rechargeable batteries. J. Power Sources 112(1), 41–48 (2002)
H. Kondo et al., Effects of Mg-substitution in Li (Ni Co, Al) O2 positive electrode materials on the crystal structure and battery performance. J. Power Sources 174(2), 1131–1136 (2007)
D. Morgan, A. Van der Ven, G. Ceder, Li conductivity in Li x MPO4 (M = Mn, Fe Co, Ni) olivine materials. Electrochem. Solid State Lett. 7(2), A30–A32 (2004)
K. Tatsumi et al., Local atomic and electronic structures around Mg and Al dopants in LiNiO 2 electrodes studied by XANES and ELNES and first-principles calculations. Phys. Rev. B 78(4), 045108 (2008)
F. Kong et al., Ab initio study of doping effects on LiMnO 2 and Li2MnO3 cathode materials for Li-ion batteries. J. Mater. Chem. A 3(16), 8489–8500 (2015)
W.-J. Zhang, Structure and performance of LiFePO4 cathode materials: a review. J. Power Sources 196(6), 2962–2970 (2011)
Y. Panayiotatos, R. Vovk, A. Chroneos, Gold and silver diffusion in germanium: a thermodynamic approach. J. Mater. Sci. 28(2), 1966–1970 (2017)
Y. Panayiotatos et al., Tin diffusion in germanium: a thermodynamic approach. J. Mater. Sci. 28(13), 9936–9940 (2017)
J. Jung, M. Cho, M. Zhou, Density functional theory study of the mechanism of Li diffusion in rutile RuO2. AIP Adv. 4(1), 017104 (2014)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ullah, I., Majid, A. & Khan, M.I. Gadolinium-based olivine phosphate for upgradation of cathode material in lithium ion battery. J Mater Sci: Mater Electron 31, 7324–7334 (2020). https://doi.org/10.1007/s10854-019-02471-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-019-02471-x