Advertisement

High lead solder (over 85 %) solder in the electronics industry: RoHS exemptions and alternatives

  • Sandeep MenonEmail author
  • Elviz George
  • Michael Osterman
  • Michael Pecht
Article

Abstract

The restriction of hazardous substances (RoHS) directive passed in 2006 prohibited the use of certain hazardous substances, including lead, in electrical and electronic equipment. However, high melting temperature type solders (i.e. lead-based alloys containing 85 % or more lead by weight) were exempted from the directive regardless of the application in which they were used. In 2011, a recast of the RoHS directive (RoHS2) was passed to set deadlines for eliminating exempt applications such as high lead (>85 % lead) alloys. These deadlines may only be extended through requests demonstrating that there are no acceptable alternatives. While there are no drop-in replacements for high lead solders, their use in a variety of applications has been eliminated and progress is being made on other application categories. As there is no proven reliable solution for some categories such as die attach and high temperature applications, it is likely that the European Union will extend the exempt for the use of high lead alloys but limit the scope of the exemption to those applications where no reliable alternative exists. Additionally, in light of the possible impending deadlines, there is an urgent need to conduct more studies to evaluate alternatives to high lead solder in different applications.

Keywords

Solder Joint Solder Alloy Solder Bump High Lead Conductive Adhesive 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Wellkang Consulting, Brief introduction of directive 2002/96/EC of 27 January 2003 on waste electrical and electronic equipment (WEEE). http://www.weeeregistration.com/weee-directive.html. Accessed 15 July 2014
  2. 2.
    Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, Official Journal L 037, pp. 19–23, February 13, 2003. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:32002L0095:EN:HTML. Accessed 15 July 2014
  3. 3.
    European Commision, Restriction of hazardous substances in electrical and electronic equipment. http://ec.europa.eu/environment/waste/rohs_eee/legis_en.htm. Updated 7 February 2014, accessed 15 July 2014
  4. 4.
    M. Pecht, Review of high lead solder and lead glass rohs exemption. http://rohs.exemptions.oeko.info/fileadmin/user_upload/Stakeholder_comments/Exemption-7a_5_Pecht_Uni_Maryland_25_March_2008.pdf. Accessed 15 July 2014
  5. 5.
    M. Pecht, Y. Fukuda, S. Rajagopal, The impact of lead-free legislation exemptions on the electronics industry. IEEE Trans. Electron. Packag. Manuf. 27(4), 221–232 (2004)CrossRefGoogle Scholar
  6. 6.
    European Commision, Recast of the RoHS directive. http://ec.europa.eu/environment/waste/rohs_eee/. Updated 7 February 2014, accessed 15 July 2014
  7. 7.
    European Commission, Environment: commission proposes revised laws on recycling and use of hazardous substances in electrical and electronic equipment, IP/08/1878, Press Release, December 3, 2008. http://europa.eu/rapid/press-release_IP-08-1878_en.htm. Accessed 15 July 2014
  8. 8.
    A. Wheeler, J. Adams, M Cole, C, Grosskopf, J. Lagler, S. Lau, D. Wihite, K. Van der Herten, European Union RoHS recast-implication for exemption and substance review. in Proceedings of SMTA International, 2013Google Scholar
  9. 9.
    P. Goodman, P. Strudwick, R. Skipper, Technical adaptation under directive 2002/95/EC (RoHS)—investigation of exemptions, ERA Report 2004-0603, pp. 54–72, December 2004. http://rohs.exemptions.oeko.info/fileadmin/user_upload/ERA_technology_study_Dec_2004.pdf. Accessed 15 July 2014
  10. 10.
    European Commision, End of life vehicles. http://ec.europa.eu/environment/waste/elv_index.htm. Updated 7 February 2014, accessed 15 July 2014
  11. 11.
    V.R. Manikam, K.Y. Cheong, Die attach materials for high temperature applications: a review. IEEE Trans. Compon. Packag. Manuf. Technol. 1(4), 457–478 (2011)CrossRefGoogle Scholar
  12. 12.
    K. Suganuma, S.J. Kim, K.S. Kim, High-temperature lead free solders: properties and possibilities. J. Mater. 61(1), 64–71 (2009)Google Scholar
  13. 13.
    H. Schoeller, S. Bansal, A. Knobloch, D. Shaddock, J. Cho, Effect of alloying elements on creep behavior of high pb-based solders. Mater. Sci. Eng. A 528, 1063–1070 (2011)CrossRefGoogle Scholar
  14. 14.
    J.W. Yoon, H.S. Chun, S.B. Jung, Reliability analysis of Au–Sn flip-chip solder bump fabricated by co-electroplating. J. Mater. Res. 22(5), 1219–1229 (2007)CrossRefGoogle Scholar
  15. 15.
    D.G. Ivey, Microstructural characterization of Au/Sn solder for packaging in optoelectronic applications. Micron 29(4), 281–287 (1998)CrossRefGoogle Scholar
  16. 16.
    W. Kim, Q. Wang, K. Jung, J. Hwang, C. Moon, Application of Au–Sn eutectic bonding in hermetic RF MEMS wafer level packaging. in 9th International Symposium on Advanced Packaging, pp. 215–219, 2004Google Scholar
  17. 17.
    J. Doesburg, D.G. Ivey, Microstructure and preferred orientation of Au–Sn alloy plated deposits. Mater. Sci. Eng. B 78, 44–52 (2000)CrossRefGoogle Scholar
  18. 18.
    F.P. McCluskey, M. Dash, Z. Wang, D. Huff, Reliability of high temperature solder alternatives. Microelectron. Reliab. 46, 1910–1914 (2006)CrossRefGoogle Scholar
  19. 19.
    V. Chidambaram, J. Hattel, J. Hald, High-temperature lead-free solder alternatives. Microelectron. Eng. 88, 981–989 (2011)CrossRefGoogle Scholar
  20. 20.
    C.L. Chin, Y.W. Chen, G. Matijasevic, Au–In bonding below the eutectic temperature. IEEE Trans. Compon. Hybrids Manuf. Technol. 16(3), 311–316 (1993)CrossRefGoogle Scholar
  21. 21.
    Y.V. Naidich, V. Zhuralev, N. Karsovskaya, The wettability of silicon carbide by Au–Si alloys. Mater. Sci. Eng. A 245, 293–299 (1998)CrossRefGoogle Scholar
  22. 22.
    S. Kim, K.S. Kim, S.S. Kim, K. Suganuma, Interfacial reaction and die attach properties of Zn–Sn high-temperature solders. J. Electron. Mater. 38(2), 266–272 (2009)CrossRefGoogle Scholar
  23. 23.
    S. Kim, K.S. Kim, S.S. Kim, K. Suganuma, G. Izuta, Improving the reliability of Si die attachment with Zn–Sn-based high-temperature Pb-free solder using a TiN diffusion barrier. J. Electron. Mater. 38(12), 2668–2675 (2009)CrossRefGoogle Scholar
  24. 24.
    S. Kim, K. S. Kim, G. Izuta, K. Suganuma, Reliability of die attached AlN-DBC module using Zn–Sn high temperature lead-free solders. in 2nd Electronics Systemintegration Technology Conference, pp. 411–416, 2008Google Scholar
  25. 25.
    R. Mahmudi, M. Eslami, Shear strength of the Zn–Sn high-temperature lead-free solders. J. Mater. Sci. Mater. Electron. 22, 1168–1172 (2011)CrossRefGoogle Scholar
  26. 26.
    J.E. Lee, K.S. Kim, K. Suganuma, M. Inoue, G. Izuta, Thermal properties and phasse stability of Zn–Sn and Zn–In alloys as high temperature lead-free solders. Mater. Trans. 48(3), 584–593 (2007)CrossRefGoogle Scholar
  27. 27.
    M. Rettenmayr, P. Lambracht, B. Kempf, C. Tschudin, Zn–Al based alloys as Pb-free solders for die attach. J. Electron. Mater. 31(4), 278–285 (2002)CrossRefGoogle Scholar
  28. 28.
    T. Shimzu, H. Ishikawa, I. Ohnuma, K. Ishida, Zn–Al–Mg–Ga alloys as Pb-free solder for die attaching use. J. Electron. Mater. 28(11), 1172–1175 (1999)CrossRefGoogle Scholar
  29. 29.
    J.M. Song, H.Y. Chuang, T.X. Wen, Thermal and tensile properties of Bi–Ag alloys. Metall. Mater. Trans. A 38, 1371–1375 (2007)CrossRefGoogle Scholar
  30. 30.
    Y. Shi, W. Fang, Z. Xia, Y. Lei, F. Guo, X. Li, Investigation of rare earth-doped BiAg high temperature solders. J. Mater. Sci. Mater. Electron. 21, 875–881 (2010)CrossRefGoogle Scholar
  31. 31.
    J.N. Lalena, N.F. Dean, M.W. Weiser, Experimental investigation of Ge-doped Bi–11Ag as new Pb-free solder for power die attachment. J. Electron. Mater. 31(11), 1244–1249 (2002)CrossRefGoogle Scholar
  32. 32.
    Y. Takaku, I. Ohnuma, R. Kainuma, Y. Yamada, Y. Yagi, Y. Nishibe, K. Ishida, Development of Bi-base high-temperature Pb-free solders with second-phase dispersion: thermodynamic calculation, microstructure, and interfacial reaction. J. Electron. Mater. 35(11), 1926–1972 (2006)CrossRefGoogle Scholar
  33. 33.
    Y. Yamada, Y. Takaku, Y. Yagi, Y. Nishibe, I. Ohnuma, Y. Sutou, R. Kainuma, K. Ishida, Pb-free High temperature solders for power device packaging. Microelectron. Reliab. 46, 1932–1937 (2006)CrossRefGoogle Scholar
  34. 34.
    R.W. Chuang, C.C. Lee, Silver–indium joints produced at low temperatures for high temperature devices. IEEE Trans. Compon. Packag. Technol. 25(3), 453–458 (2002)CrossRefGoogle Scholar
  35. 35.
    Z. Zhang, Processing and Characterization Of Microscale And Nanoscale Silver Paste For Power Device Packaging. Ph.D. dissertation, Dept. Material Science Engineering, Virginia Polytech Institute, Blacksburg, 2005Google Scholar
  36. 36.
    R. Kisiel, Z. Szczepanski, Die-attachment solutions for SiC power devices. Microelectron. Reliab. 49, 627–629 (2009)CrossRefGoogle Scholar
  37. 37.
    P. McCluskey, H. Greve, Transient liquid phase sintered joints for wide bandgap power electronics packaging. in Pan Pacific Conference Proceedings, 2014Google Scholar
  38. 38.

Copyright information

© Springer Science+Business Media New York 2015

Authors and Affiliations

  • Sandeep Menon
    • 1
    Email author
  • Elviz George
    • 1
  • Michael Osterman
    • 1
  • Michael Pecht
    • 1
  1. 1.Center for Advanced Life Cycle Engineering (CALCE)University of MarylandCollege ParkUSA

Personalised recommendations