Skip to main content
Log in

Effect of sintering temperature and time on microwave dielectric properties of Nd2MoO6 ceramics

  • Published:
Journal of Materials Science: Materials in Electronics Aims and scope Submit manuscript

Abstract

The microwave dielectric properties of Nd2MoO6 ceramics were investigated with a view to their application in mobile communication. The Nd2MoO6 ceramics were prepared by the conventional solid-state method with various sintering temperatures and sintering times. A maximum density of 6.05 g/cm3 was obtained for Nd2MoO6 ceramic, sintered at 1,350 °C for 4 h. Dielectric constants (ɛ r ) of 10.9–15.4 and quality factor (Q × f) of 7,300–19,200 GHz were obtained at sintering temperatures in the range 1,200–1,400 °C for 4 h. Dielectric constants (ɛ r ) of 14.6–15.4 and quality factor (Q × f) of 11,100–19,200 GHz were obtained for sintering times in the range 2–6 h at a sintering temperature of 1,350 °C. A dielectric constants (ɛ r ) of 15.4, a quality factor (Q × f) of 19,200 GHz, and a temperature coefficient of resonant frequency (τ f ) of −59 ppm/°C were obtained when Nd2MoO6 ceramics were sintered at 1,350 °C for 4 h.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Y.C. Chen, M.Z. Weng, K.C. Chang, J. Mater. Sci. Mater. Electron. 25, 2475–2481 (2014)

    Article  Google Scholar 

  2. Y.C. Chen, M.Z. Weng, K.C. Chang, J. Mater. Sci. Mater. Electron. 25, 844–851 (2014)

    Article  Google Scholar 

  3. Y.C. Chen, C.H. Li, J. Mater. Sci. Mater. Electron. doi:10.1007/s10854-014-2167-9

  4. F. De Smet, M. Devillers, C. Poleunis, P. Bertrand, J. Chem. Soc. Faraday Trans. 94, 941–947 (1998)

    Article  Google Scholar 

  5. F. De Smet, P. Ruiz, B. Delmon, M. Devillers, J. Phys. Chem. B 105, 12355 (2001)

    Article  Google Scholar 

  6. B.W. Hakki, P.D. Coleman, IEEE Trans. Microwave Theory Tech. 8, 402–410 (1960)

    Article  Google Scholar 

  7. Y. Kobayashi, M. Katoh, IEEE Trans. Microwave Theory Tech. 33, 586–592 (1985)

    Article  Google Scholar 

  8. American Society for Testing and Materials, C830-00: standardtest methods for apparent porosity, liquid absorption, apparent specific gravity and bulk density of refractory shapes by vacuum pressure, ASTM Annual Book of Standards, Volume 15.01: Refractions; Activated Carbon; Advanced Ceramics 141–145 (2002)

  9. Y. Tohdo, K. Kakimoto, H. Ohsato, H. Yamada, T. Okawa, J. Eur. Ceram. Soc. 26, 2039–2043 (2006)

    Article  Google Scholar 

  10. B.D. Silverman, Phys. Rev. 125, 1921–1930 (1962)

    Article  Google Scholar 

  11. W.S. Kim, T.H. Hong, E.S. Kim, K.H. Yoon, Jpn. J. Appl. Phys. 37, 3567–3571 (1998)

    Google Scholar 

  12. A.J. Bosman, E.E. Havinga, Phys. Rev. 129, 1593 (1963)

    Article  Google Scholar 

Download references

Acknowledgments

The authors would like to thank the National Science Council in Taiwan, for financially supporting this research under Contract No. NSC 102-2622-E-262-009-CC3.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yih-Chien Chen.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chen, YC., Weng, MZ. Effect of sintering temperature and time on microwave dielectric properties of Nd2MoO6 ceramics. J Mater Sci: Mater Electron 26, 853–859 (2015). https://doi.org/10.1007/s10854-014-2474-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10854-014-2474-1

Keywords

Navigation