Time-lapse photography of the β-Sn/α-Sn allotropic transformation


When tin transforms from the β to α phase it undergoes a dramatic process. The crystal structure changes from tetragonal to diamond cubic; the material properties transform from a ductile metal to a brittle semiconductor; however the most notable change is the decrease in density, which goes from 7.31 g/cm3 to 5.77 g/cm3 [1]. It can be calculated that this decrease in density is equivalent to an increase in volume of about 26% [2]. Due to this volume increase and the brittleness, the transformed material progressively cracks and eventually falls apart. This could potentially be a threat for tin-rich alloys used in electronics in low temperature applications. Due to the optimal transformation temperature of approximately 240 K and the long time required for the transformation, a direct observation of the phenomenon has not been possible. This study proposes a new method for observing the β/α transformation in situ using a time-lapse photographic technique. This study concentrates on pure tin, but the applicability of the method opens new possibilities for studying the phenomenon for other tin alloys, such as the two commonly encountered eutectics of SnCu and SnAgCu.

This is a preview of subscription content, log in to check access.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6


  1. 1.



  1. 1.

    L.D. Brownlee, Nature 166(4220), 482 (1950)

    Google Scholar 

  2. 2.

    J.H. Becker, J. Appl. Phys. 29(7), 1110–1121 (1956)

    Article  Google Scholar 

  3. 3.

    W.J. Plumbridge, J. Mater. Sci.: Mater. Electron. 18, 307–318 (2007)

    Article  CAS  Google Scholar 

  4. 4.

    K. Sweatman, in Proceedings of JEDEX, San Jose, 2005

  5. 5.

    W.L. Williams, ASTM Special Tech. Pub. 189, 149–157 (1956)

    Google Scholar 

  6. 6.

    A.D. Stirkas, Inorg. Mater. 39, 806–810 (2003)

    Article  Google Scholar 

  7. 7.

    J. Spergel, ASTM Special Tech. Pub. 319, 83–92 (1962)

    Google Scholar 

  8. 8.

    G.A. Rinne, Adv. Packag. November–December, 32–34 (2006)

  9. 9.

    R.W. Smith, J. Less-Common Met. 114, 69–80 (1986)

    Article  Google Scholar 

  10. 10.

    A. Bornemann, ASTM Special Tech. Pub., Symposium on Solder, 189, 129–148 (1956)

  11. 11.

    R.R. Rogers, J.F. Fydell, J. Electrochem. Soc. 100(9), 383–387 (1953)

    Article  CAS  Google Scholar 

  12. 12.

    F. Vnuk, J. Cryst. Growth 48, 486–488 (1980)

    Article  ADS  CAS  Google Scholar 

  13. 13.

    E.O. Hall, The Mechanism of Phase Transformation in Metals. (London, 1955), pp. 87–92

Download references


We would like to thank Milos Dusek for his help in setting up the experiment and the DTI for funding the research.

Author information



Corresponding author

Correspondence to D. Di Maio.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Di Maio, D., Hunt, C. Time-lapse photography of the β-Sn/α-Sn allotropic transformation. J Mater Sci: Mater Electron 20, 386–391 (2009). https://doi.org/10.1007/s10854-008-9739-5

Download citation


  • Transformation Rate
  • SnZn
  • Free Energy Difference
  • Peltier Element
  • Allotropic Transformation