Abstract
This work studies the effects of current frequency and current density on etching morphology, microstructure and static capacity of the aluminum foils used in electrolytic capacitors. The behavior associated with electrochemical etching during an anodic half cycle was investigated by a potentiostat. The oxide covering of the anode, which protected aluminum from etching, thickened as the frequency increased. Increasing the current density inhibit the passing of chlorine ions through the passive cover. The static capacity increased to 70μF/cm2 with 20 V forming voltage by optimization the etching parameters used herein this work.
Similar content being viewed by others
References
K. Arai, T. Suzuki, Light Mata. 31, 675 (1981)
T. Suzuki, K. Arai, M. Shiga, Y. Nakamura, Metal. Trans. 16A, 27 (1985)
Z.Q. Zheng, W.B. Zhang, J. China Inst. South Inst. Mining Central Metal. 1, 111 (1983)
P.C.M. De Haan, J. Van Rijkom, J.A.H. Sontgerath, Mater. Sci. Forum 217, 765 (1996)
H.C. Chen, B.L. Ou, Mater. Electr. 15, 297 (2004)
H.C. Chen, B.L. Ou, Mater. Electr. 15, 819 (2004)
R.S. Alwitt, H. Uchi, T.R. Beck R.C. Alkire, J. Eletrochem. Soc. 131, 13 (1984)
R.S. Alwitt, H. Ucki, T.R. Beck, R.C. Alkire, J. Electrochem.Soc. 131, 13 (1984)
J. Flis, L. Kowalczyk, J. Appl. Electrochem. 25, 501 (1995)
K. Matsuki, A. Funakoshi, Surf. Finish. Soc. Japan 37, 655 (1986)
Acknowledgment
The authors would like to express their appreciation to the financial support by the Nation Science Council of the Republic of China under grant No. NSC90–2216-E008–008.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, Y.L., Ou, B.L. & Chiu, Y.H. Effect of frequency and current density on A.C. etching of aluminum electrolytic capacitor foil. J Mater Sci: Mater Electron 18, 627–634 (2007). https://doi.org/10.1007/s10854-006-9058-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-006-9058-7