Abstract
A comprehensive understanding of solidification behavior of Mg–Al–Zn–Bi alloys is necessary for designing novel casting Bi-modified AZ alloys. In this paper, 21 Mg–Al–Zn–Bi alloys were prepared to investigate the phase constituents, morphologies, grain sizes and area fractions of precipitates in as-cast microstructures, as well as their phase transition temperatures and solidification paths by using X-ray diffraction, scanning electron microscopy, optical microscopy and differential scanning calorimetric techniques. It was found that the Bi addition leads to the formation of α-Mg3Bi2 phase, which became coarse flake as Bi content increased. Besides, the Bi addition can modify the morphology of eutectic γ-Al12Mg17 phase and refine the grain size of primary phase. Moreover, the measured area fractions of precipitates increased steadily as Bi content increased, which were comparable with the model-predicated values. After that, the calculated liquidus projections in the Mg-rich corner of Mg–Al–Zn–Bi quaternary system were employed for demonstrating the effects of Bi addition on the solidification sequences. Additionally, the phase transition temperatures predicted via Scheil solidification simulations agreed well with measured values. The present work indicated that the combination of experimental investigations and thermodynamic calculations can serve as an efficient method to obtain accurate and comprehensive solidification behavior of Bi-modified Mg–Al–Zn alloys.
Similar content being viewed by others
References
Mordike BL, Ebert T (2001) Magnesium Properties-applications-potential. Mater Sci Eng A 302:37–45
Liu W, Jiang B, Luo S, Chen S, Pan F (2018) Mechanical properties and failure behavior of AZ61 magnesium alloy at high temperatures. J Mater Sci 53:8536–8544. https://doi.org/10.1007/s10853-018-2125-7
Cheng T, Tang Y, Zhang L (2019) Update of thermodynamic descriptions of the binary Al–Sn and ternary Mg–Al–Sn systems. CALPHAD 64:354–363
Si H, Jiang Y, Tang Y, Zhang L (2019) Stable and metastable phase equilibria in binary Mg–Gd system: a comprehensive understanding aided by CALPHAD modeling. J Magnes Alloys 7:501–513
Pan F, Yang M, Chen X (2016) A review on casting magnesium alloys: modification of commercial alloys and development of new alloys. J Mater Sci Technol 32:1211–1221
Ambat R, Aung NN, Zhou W (2000) Evaluation of microstructural effects on corrosion behavior of AZ91D magnesium alloy. Corros Sci 42:1433–1455
Srinivasan A, Ajithkumar KK, Swaminathan J, Pillai UTS, Pai BC (2013) Creep behavior of AZ91 magnesium alloy. Procedia Eng 55:109–113
Luo AA (2013) Recent magnesium alloy development for elevated temperature applications. Int Mater Rev 49:13–30
Wang JS, Li XB (2019) Simultaneously improving strength and ductility of AZ91-type alloys with minor Gd addition. J Alloys Compd 803:689–699
Hirai K, Somekawa H, Takigawa Y, Higashi K (2005) Effects of Ca and Sr addition on mechanical properties of a cast AZ91 magnesium alloy at room and elevated temperature. Mater Sci Eng A 403:276–280
Pai BC, Pillai UTS, Manikandan P, Srinivasan A (2012) Modification of AZ91 Mg alloys for high temperature applications. Trans Indian Inst Met 65:601–606
Mahmudi R, Kabirian F, Nematollahi Z (2011) Microstructural stability and high-temperature mechanical properties of AZ91 and AZ91+2RE magnesium alloys. Mater Des 32(5):2583–2589
Wang MF, Xiao DH, Zhou PF, Liu WS, Ma YZ, Sun BR (2018) Effects of rare earth yttrium on microstructure and properties of Mg–Al–Zn alloy. J Alloys Compd 742:232–239
Zhao Z, Chen Q, Wang Y, Shu D (2009) Microstructures and mechanical properties of AZ91D alloys with Y addition. Mater Sci Eng A 515(1–2):152–161
Meng SJ, Yu H, Zhang HX, Cui HW, Park SH, Zhao WM, You BS (2017) Microstructure and mechanical properties of an extruded Mg–8Bi–1Al–1Zn (wt%) alloy. Mater Sci Eng A 690:80–87
Ren WL, Li AQ, Shi YJ, Zhang XY (2010) Effect of bismuth addition on the microstructure and mechanical properties of AZ81 magnesium alloy. Rare Met Cem Carbides 38:34–37
Wang YX, Zhou JX, Wang J, Luo TJ, Yuan YS (2011) Effect of Bi addition on microstructures and mechanical properties of AZ80 magnesium alloy. Trans Nonferrous Met Soc China 21:711–716
Elen L, Zengin H, Turen Y, Turan ME, Sun Y, Ahlatci H (2015) Effects of Bismuth (Bi) additions on microstructure and mechanical properties of AZ91 alloy. In: Metal 2015, Brno, Czech Republic, 3–5 June 2015
Yuan GY, Sun YS, Ding WJ (2001) Effects of bismuth and antimony additions on the microstructure and mechanical properties of AZ91 magnesium alloy. Mater Sci Eng A 308:38–44
Liu ZK, Chen LQ, Raghavan P, Du Q, Sofo JO, Langer SA, Wolverton C (2004) An integrated framework for multi-scale materials simulation and design. J Comput Aided Mater Des 11:183–199
Lu Z, Zhang L (2017) Thermodynamic description of the quaternary Al–Si–Mg–Sc system and its application to the design of novel Sc-additional A356 alloys. Mater Des 116:427–437
Tang Y, Du Y, Zhang L, Yuan XM, Kaptay G (2012) Thermodynamic description of the Al–Mg–Si system using a new formulation for the temperature dependence of the excess Gibbs energy. Thermochim Acta 527:131–142
Tang Y, Li YS, Zhao WM, Zhang L (2019) Thermodynamic descriptions of the quaternary Mg–Al–Zn–Bi system supported by experiments and their application in descriptions of solidification behaviors in Bi-additional AZ casting alloys. J Magnes Alloy (under revision)
Tang Y, Zhang L, Du Y (2015) Diffusivities in liquid and fcc Al–Mg–Si alloys and their application to the simulation of solidification and dissolution processes. CALPHAD 49:58–66
Wang R, Chen W, Tang Y, Zhang L, Du Y, Jin Z, Živković D (2016) Diffusivities, atomic mobilities, and simulation of ternary eutectic solidification in the Ag–Al–Cu melts. J Mater Sci 51(12):5979–5991. https://doi.org/10.1007/s10853-016-9898-3
Dini H, Andersson NE, Jarfors AEW (2016) Effect of Mg17Al12 fraction on mechanical properties of Mg–9%Al–1%Zn cast alloy. Metals 6:251
Yakubtsov IA, Diak BJ, Sager CA, Bhattacharya B, MacDonald WD, Niewczas M (2008) Effects of heat treatment on microstructure and tensile deformation of Mg AZ80 alloy at room temperature. Mater Sci Eng A 496:247–255
Zhu TP, Chen ZW, Gao W (2010) Effect of cooling conditions during casting on fraction of β-Mg17Al12 in Mg–9Al–1Zn cast alloy. J Alloys Compd 501:291–296
Das G (1999) Image analysis in quantitative metallography. In: Sridhar G, Chowdhunv SG, Goswanri NG (eds) Materials characterization techniques-principles and applications. National Metallurgical Laboratory (NML), Jamshedpur, pp 135–150
Acknowledgements
The financial supports are from Hebei Provincial Science and Technology Program of China (Grant No. E2019202234) and Research Foundation from Education Department of Hebei Province (Grant No. BJ2018026) Outstanding Young Talents Plan. Y. Tang acknowledges the financial support from Yuanguang fellowship released by Hebei University of Technology.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, Y., Tang, Y., Zhao, W. et al. Effects of Bi addition on solidification behavior of Mg–Al–Zn casting alloys using experiments and CALPHAD calculations. J Mater Sci 55, 7039–7051 (2020). https://doi.org/10.1007/s10853-020-04492-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-020-04492-y