Abstract
Fabrication of the polymer/graphene nanocomposites with high electro-mechanical properties is very challenging approach these days against the electromagnetic pollution. This paper mainly focused on the preparation of in situ reduced graphene oxide (IrGO) during melt blending of polycarbonate/ethylene-methyl acrylate [PC/EMA (95/5 wt/wt)] blend and graphene oxide to achieve enhanced electro-mechanical properties of the nanocomposites. It involves the reduction mechanism of graphene oxide with in the polymer matrix. The nanocomposites showed a significant improvement in mechanical stiffness owing to efficient stress transfer from matrix to filler. PC/EMA–IrGO nanocomposites with 15 phr loading of GO showed highest electromagnetic shielding effectiveness (− 30 dB) over the frequency range of X-band (8.2–12.4 GHz). This promising strategy of developing single-step PC/EMA–IrGO nanocomposites with enhanced electro-mechanical properties can also be used in large-scale technical and commercial applications.
Similar content being viewed by others
References
Balandin AA, Ghosh S, Bao W, Calizo I, Teweldebrhan D, Miao F et al (2008) Superior thermal conductivity of single-layer graphene. Nano Lett 8(3):902–907
Liu J, Xue Y, Zhang M, Dai L (2012) Graphene-based materials for energy applications. MRS Bull 37(12):1265–1272
Ovid’Ko I (2013) Mechanical properties of graphene. Rev Adv Mater Sci 34(1):1–11
Ferrari AC, Bonaccorso F, Fal’Ko V, Novoselov KS, Roche S, Bøggild P et al (2015) Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems. Nanoscale 7(11):4598–4810
Ramanathan T, Abdala A, Stankovich S, Dikin D, Herrera-Alonso M, Piner R et al (2008) Functionalized graphene sheets for polymer nanocomposites. Nat Nanotechnol 3(6):327–331
Yang Y, Rigdon W, Huang X, Li X (2013) Enhancing graphene reinforcing potential in composites by hydrogen passivation induced dispersion. Sci Rep 3:1–7
Yooness M, Gaier JR (2010) Highly conductive multifunctional graphene polycarbonate nanocomposites. ACS Nano 4(12):7211–7220
Zhang X, Zhou Z, Lu C (2015) Reductant-and stabilizer-free synthesis of graphene–polyaniline aqueous colloids for potential waterborne conductive coating application. RSC Adv 5(26):20186–20192
Yavari F, Fard HR, Pashayi K, Rafiee MA, Zamiri A, Yu Z et al (2011) Enhanced thermal conductivity in a nanostructured phase change composite due to low concentration graphene additives. J Phys Chem C 115(17):8753–8758
Liang J, Xu Y, Huang Y, Zhang L, Wang Y, Ma Y et al (2009) Infrared-triggered actuators from graphene-based nanocomposites. J Phys Chem C 113(22):9921–9927
Kim H, Miura Y, Macosko CW (2010) Graphene/polyurethane nanocomposites for improved gas barrier and electrical conductivity. Chem Mater 22(11):3441–3450
Cao J, Zhang X, Wu X, Wang S, Lu C (2016) Cellulose nanocrystals mediated assembly of graphene in rubber composites for chemical sensing applications. Carbohydr Polym 140:88–95
Zhou Z, Zhang X, Wu X, Lu C (2016) Self-stabilized polyaniline@graphene aqueous colloids for the construction of assembled conductive network in rubber matrix and its chemical sensing application. Compos Sci Technol 125:1–8
Colonna S, Bernal M, Gavoci G, Gomez J, Novara C, Saracco G et al (2017) Effect of processing conditions on the thermal and electrical conductivity of poly (butylene terephthalate) nanocomposites prepared via ring-opening polymerization. Mater Des 119:124–132
Lee B-I, Jeong H, Byeon S-H (2013) Tunable color generation of transparent composite films reinforced with luminescent nanofillers. Chem Commun 49(97):11397–11399
Bao C, Song L, Xing W, Yuan B, Wilkie CA, Huang J et al (2012) Preparation of graphene by pressurized oxidation and multiplex reduction and its polymer nanocomposites by masterbatch-based melt blending. J Mater Chem 22(13):6088–6096
Istrate OM, Paton KR, Khan U, O’Neill A, Bell AP, Coleman JN (2014) Reinforcement in melt-processed polymer–graphene composites at extremely low graphene loading level. Carbon 78:243–249
Shen B, Zhai W, Chen C, Lu D, Wang J, Zheng W (2011) Melt blending in situ enhances the interaction between polystyrene and graphene through π–π stacking. ACS Appl Mater Interfaces 3(8):3103–3109
Wan C, Chen B (2012) Reinforcement and interphase of polymer/graphene oxide nanocomposites. J Mater Chem 22(8):3637–3646
Park S, Ruoff RS (2009) Chemical methods for the production of graphenes. Nat Nanotechnol 4(4):217–224
Georgakilas V (2014) Functionalization of graphene. Wiley, New York
Georgakilas V, Otyepka M, Bourlinos AB, Chandra V, Kim N, Kemp KC et al (2012) Functionalization of graphene: covalent and non-covalent approaches, derivatives and applications. Chem Rev 112(11):6156–6214
Guo Q, Luo Y, Liu J, Zhang X, Lu C (2018) A well-organized graphene nanostructure for versatile strain-sensing application constructed by a covalently bonded graphene/rubber interface. J Mater Chem C 6(8):2139–2147
Bai H, Xu Y, Zhao L, Li C, Shi G (2009) Non-covalent functionalization of graphene sheets by sulfonated polyaniline. Chem Commun 13:1667–1669
Salavagione HJ, Martínez G, Ellis G (2011) Recent advances in the covalent modification of graphene with polymers. Macromol Rapid Commun 32(22):1771–1789
Wang J, Xu C, Hu H, Wan L, Chen R, Zheng H et al (2011) Synthesis, mechanical, and barrier properties of LDPE/graphene nanocomposites using vinyl triethoxysilane as a coupling agent. J Nanopart Res 13(2):869–878
Steurer P, Wissert R, Thomann R, Mülhaupt R (2009) Functionalized graphenes and thermoplastic nanocomposites based upon expanded graphite oxide. Macromol Rapid Commun 30(4–5):316–327
Dreyer DR, Todd AD, Bielawski CW (2014) Harnessing the chemistry of graphene oxide. Chem Soc Rev 43(15):5288–5301
Xu Y, Hong W, Bai H, Li C, Shi G (2009) Strong and ductile poly (vinyl alcohol)/graphene oxide composite films with a layered structure. Carbon 47(15):3538–3543
Zhu Y, Stoller MD, Cai W, Velamakanni A, Piner RD, Chen D et al (2010) Exfoliation of graphite oxide in propylene carbonate and thermal reduction of the resulting graphene oxide platelets. ACS Nano 4(2):1227–1233
Bielawski C, Dreyer D, Park S, Ruoff R (2010) The chemistry of grapheme oxide. Chem Soc Rev 39(1):228–240
Pei S, Cheng H-M (2012) The reduction of graphene oxide. Carbon 50(9):3210–3228
Zhu Y, Murali S, Stoller MD, Velamakanni A, Piner RD, Ruoff RS (2010) Microwave assisted exfoliation and reduction of graphite oxide for ultracapacitors. Carbon 48(7):2118–2122
Joshi A, Bajaj A, Singh R, Anand A, Alegaonkar P, Datar S (2015) Processing of graphene nanoribbon based hybrid composite for electromagnetic shielding. Compos B Eng 69:472–477
Li M, Gao C, Hu H, Zhao Z (2013) Electrical conductivity of thermally reduced graphene oxide/polymer composites with a segregated structure. Carbon 65:371–373
Liu K, Chen L, Chen Y, Wu J, Zhang W, Chen F et al (2011) Preparation of polyester/reduced graphene oxide composites via in situ melt polycondensation and simultaneous thermo-reduction of graphene oxide. J Mater Chem 21(24):8612–8617
Zheng D, Tang G, Zhang H-B, Yu Z-Z, Yavari F, Koratkar N et al (2012) In situ thermal reduction of graphene oxide for high electrical conductivity and low percolation threshold in polyamide 6 nanocomposites. Compos Sci Technol 72(2):284–289
Tang H, Ehlert GJ, Lin Y, Sodano HA (2011) Highly efficient synthesis of graphene nanocomposites. Nano Lett 12(1):84–90
Shen Y, Jing T, Ren W, Zhang J, Jiang Z-G, Yu Z-Z et al (2012) Chemical and thermal reduction of graphene oxide and its electrically conductive polylactic acid nanocomposites. Compos Sci Technol 72(12):1430–1435
Kim C-J, Khan W, Park S-Y (2011) Structural evolution of graphite oxide during heat treatment. Chem Phys Lett 511(1–3):110–115
You F, Wang D, Cao J, Li X, Dang ZM, Hu GH (2014) In situ thermal reduction of graphene oxide in a styrene–ethylene/butylene–styrene triblock copolymer via melt blending. Polym Int 63(1):93–99
Shahriary L, Athawale AA (2014) Graphene oxide synthesized by using modified hummers approach. Int J Renew Energy Environ Eng 2(01):58–63
Bagotia N, Singh BP, Choudhary V, Sharma DK (2015) Excellent impact strength of ethylene-methyl acrylate copolymer toughened polycarbonate. RSC Adv 5(106):87589–87597
Bhawal P, Ganguly S, Das TK, Mondal S, Choudhury S, Das N (2018) Superior electromagnetic interference shielding effectiveness and electro-mechanical properties of EMA–IRGO nanocomposites through the in situ reduction of GO from melt blended EMA–GO composites. Compos B Eng 134:46–60
Li N, Huang Y, Du F, He X, Lin X, Gao H et al (2006) Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites. Nano Lett 6(6):1141–1145
Park SH, Theilmann P, Yang K, Rao AM, Bandaru PR (2010) The influence of coiled nanostructure on the enhancement of dielectric constants and electromagnetic shielding efficiency in polymer composites. Appl Phys Lett 96(4):1–3
Zhang H-B, Zheng W-G, Yan Q, Yang Y, Wang J-W, Lu Z-H et al (2010) Electrically conductive polyethylene terephthalate/graphene nanocomposites prepared by melt compounding. Polymer 51(5):1191–1196
Bagotia N, Choudhary V, Sharma D (2018) A review on the mechanical, electrical and EMI shielding properties of carbon nanotubes and graphene reinforced polycarbonate nanocomposites. Polym Adv Technol 29(6):1547–1567
Bagotia N, Choudhary V, Sharma DK (2017) Studies on toughened polycarbonate/multiwalled carbon nanotubes nanocomposites. Compos B Eng 124:101–110
Das N, Khastgir D, Chaki T, Chakraborty A (2000) Electromagnetic interference shielding effectiveness of carbon black and carbon fibre filled EVA and NR based composites. Compos A Appl Sci Manuf 31(10):1069–1081
Rostami A, Masoomi M, Fayazi MJ, Vahdati M (2015) Role of multiwalled carbon nanotubes (MWCNTs) on rheological, thermal and electrical properties of PC/ABS blend. RSC Adv 5(41):32880–32890
Huang C-Y, Wu C-C (2000) The EMI shielding effectiveness of PC/ABS/nickel-coated-carbon-fibre composites. Eur Polym J 36(12):2729–2737
Kum CK, Sung Y-T, Han MS, Kim WN, Lee HS, Lee S-J et al (2006) Effects of morphology on the electrical and mechanical properties of the polycarbonate/multi-walled carbon nanotube composites. Macromol Res 14(4):456–460
Krueger QJ, King JA (2003) Synergistic effects of carbon fillers on shielding effectiveness in conductive nylon 6, 6-and polycarbonate-based resins. Adv Polym Technol 22(2):96–111
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Bagotia, N., Choudhary, V. & Sharma, D.K. Superior electrical, mechanical and electromagnetic interference shielding properties of polycarbonate/ethylene-methyl acrylate-in situ reduced graphene oxide nanocomposites. J Mater Sci 53, 16047–16061 (2018). https://doi.org/10.1007/s10853-018-2749-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-018-2749-7