Correction to: Understanding and mitigating hydrogen embrittlement of steels: a review of experimental, modelling and design progress from atomistic to continuum

  • O. Barrera
  • D. Bombac
  • Y. Chen
  • T. D. Daff
  • E. Galindo-Nava
  • P. Gong
  • D. Haley
  • R. Horton
  • I. Katzarov
  • J. R. Kermode
  • C. Liverani
  • M. Stopher
  • F. Sweeney
Correction
  • 56 Downloads

Correction to: J Mater Sci (2018) 53:6251–6290  https://doi.org/10.1007/s10853-017-1978-5

The original paper contains a mistake in the acronym AIDE. The AIDE acronym mistake occurs in the title of the section heading and in the following text on p. 6276, and in the text in the section “Discussion and outlook on the HE mechanisms” on p. 6277. AIDE should read as adsorption-induced dislocation emission.

Also, in several places, words from a paper entitled “Hydrogen embrittlement phenomena and mechanisms” authored by Lynch [1] have been used without being properly quoted. In particular, the sentence on pp. 6276–6277, “For example, dislocations nucleated from crack tips (due to AIDE) may move away from crack tips more readily due to HELP, thereby decreasing the back-stress on subsequent dislocation emission. For crack growth predominantly by AIDE, void nucleation ahead of cracks could be promoted at slip-band intersections by HELP or by HID at particle-matrix interfaces” has been copied from [1]. Moreover, a following sentence on p. 6277, “Increases in back-stress from dislocations emitted due to AIDE can initiate HID, followed by AIDE again when the crack tip had moved away from the stress field of dislocations previously emitted” contains a large number of words used in the original work by Lynch [1] (as do other sentences in this section). We have apologised to Dr. Lynch for using his wordings without acknowledging them.

Reference

  1. 1.
    Lynch SP (2012) Hydrogen embrittlement phenomena and mechanisms. Corros Rev 30:105–123.  https://doi.org/10.1515/corrrev-2012-0502 Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Oxford Brookes University, Wheatley CampusWheatley, OxfordUK
  2. 2.Department of Engineering ScienceUniversity of OxfordOxfordUK
  3. 3.Department of Materials Science and MetallurgyUniversity of CambridgeCambridgeUK
  4. 4.Department of MaterialsUniversity of OxfordOxfordUK
  5. 5.Engineering LaboratoryUniversity of CambridgeCambridgeUK
  6. 6.Department of Materials Science and EngineeringUniversity of SheffieldSheffieldUK
  7. 7.Department of PhysicsImperial College LondonLondonUK
  8. 8.Department of PhysicsKing’s College London, StrandLondonUK
  9. 9.Warwick Centre for Predictive Modelling, School of EngineeringUniversity of WarwickCoventryUK

Personalised recommendations