Abstract
In this study, a thermoplastic/elastomeric binary blend of non-vulcanized natural rubber (NR) and polycaprolactone (PCL) was electrospun using polymer solutions consisting of varying proportions of PCL and NR. Specifically, an 8 % (w/v) NR/toluene solution was mixed with an 8 % (w/v) PCL/chloroform solution at proportions of 2, 15, 30, and 50 % (v/v). The morphological, thermal, and mechanical properties of the electrospun mats were investigated by scanning electron microscopy (SEM), differential scanning calorimetry, and uniaxial tensile tests. The SEM images demonstrated the production of micrometer- and sub-micrometer-sized fibers with no bead formation. Fibers with diameters ranging from 1.3 μm for samples with 0 % NR to 210 nm for samples containing 50 % NR were observed. Fibers with rough and smooth morphologies were observed, showing that the PCL/NR mats had phase-separated. The blend miscibility was evaluated by thermal analysis, which showed that blending did not improve the thermal stability of the systems. An investigation of the mechanical properties of the electrospun mats showed that adding NRL to the blend increased the tensile modulus, the ultimate elasticity, and the strain. Thus, non-vulcanized NR was successfully incorporated into electrospun mats, which exhibited useful mechanical properties that could be harnessed in biomaterials applications.
Similar content being viewed by others
References
Ayres CE, Jha BS, Sell SA, Bowlin GL, Simpson DG (2010) Wiley Interdiscip Rev Nanomed Nanobiotechnol 2:20
Pham QP, Sharma U, Mikos AG (2006) Tissue Eng 12:1197
Zander NE, Orlicki JA, Rawlett AM, Beebe TP (2013) J Mater Sci Mater Med 24:179
Balguid A, Mol A, van Marion MH, Bank RA, Bouten CVC, Baaijens FPT (2009) Tissue Eng Part A 15:437
Zhang H, Lou SF, Williams GR, Branford-White C, Nie HL, Quan J, Zhu LM (2012) Int J Pharm 439:100
Ma ZW, Kotaki M, Ramakrishna S (2005) J Membr Sci 265:115
Yoshimatsu K, Ye L, Lindberg J, Chronakis IS (2008) Biosens Bioelectron 23:1208
Son WK, Youk JH, Park WH (2006) Carbohydr Polym 65:430
Taepaiboon P, Rungsardthong U, Supaphol P (2007) Eur J Pharm Biopharm 67:387
Sant S, Hwang CM, Lee SH, Khademhosseini A (2011) J Tissue Regen Med 5:283
Borg E, Frenot A, Walkenstrom P, Gisselfalt K, Gretzer C, Gatenholm P (2008) J Appl Polym Sci 108:491
Frade MAC, Valverde RV, de Assis RVC, Coutinho-Netto J, Foss NT (2001) Int J Dermatol 40:238
Neves WFP, Graeff CFD, Ferreira M, Mulato M, Bernardes MS, Coutinho-Netto J (2006) J Appl Polym Sci 100:702
Neves-Junior WFP, Ferreira M, Alves MCO, Graeff CFO, Mulato M, Coutinho-Netto J, Bernardes MS (2006) Braz J Phys 36:586
Davi CP, Galdino LFMD, Borelli P, Oliveira ON Jr, Ferreira M (2012) J Appl Polym Sci 125:2137
Mendonca RJ, Mauricio VB, Teixeira LD, Lachat JJ, Coutinho-Netto J (2010) Phytother Res 24:764
Sithornkul S, Threepopnatkul P (2009) In: Yin YS, Wang X (eds) Multi-functional materials and structures II, Pts 1 and 2., p 1583
Tarachiwin L, Sakdapipanich J, Ute K, Kitayama T, Tanaka Y (2005) Biomacromolecules 6:1858
Rippel MM, Leite CAP, Lee LT, Galembeck F (2005) Colloid Polym Sci 283:570
Sansatsadeekul J, Sakdapipanich J, Rojruthai P (2011) J Biosci Bioeng 111:628
Magalhães ASG, Feitosa JPdA (1999) Polimeros 9:65
Ferreira M, Mendonça RJ, Coutinho-Netto J, Mulato M (2009) Braz J Phys 39:564
Kim GH, Shin HG, Cho WJ, Ha CS (2002) J Appl Polym Sci 86:1071
Kolarik J, Fambri L, Slouf M, Konecny D (2005) J Appl Polym Sci 96:673
Kweon H, Yoo MK, Park IK, Kim TH, Lee HC, Lee HS, Oh JS, Akaike T, Cho CS (2003) Biomaterials 24:801
Martins MA, Moreno RMB, McMahan CM, Brichta JL, Gonçalves PdS, Mattoso LHC (2008) Thermochim Acta 474:62
Campos A, Marconcini JM, Martins-Franchetti SM, Mattoso LHC (2012) Polym Degrad Stab 97:1948
Kaavessina M, Ali I, Elleithy RH, Al-Zahrani SM (2012) J Polym Res 19:9818
de Oliveira LCS, de Arruda EJ, da Costa RB, Gonçalves PS, Delben A (2003) Thermochim Acta 398:259
Tammaro L, Russo G, Vittoria V (2009) J Nanomater 2009:1
Lizymol PP, Thomas S (1993) Polym Degrad Stab 41:59
Del Gaudio C, Bianco A, Folin M, Baiguera S, Grigioni M (2009) J Biomed Mater Res 89A:1028
Acknowledgements
The authors thank Prof. E. C. Venancio (UFABC) for the high voltage source. This work was supported by CEM-UFABC, Embrapa Instrumentação Agropecuária, CNPq (471709/2012-3) and Program-CAPES Rede Nanobiotec-Brasil (Edital CAPES04/CII-2008).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Costa, L.M.M., Mattoso, L.H.C. & Ferreira, M. Electrospinning of PCL/natural rubber blends. J Mater Sci 48, 8501–8508 (2013). https://doi.org/10.1007/s10853-013-7667-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-013-7667-0